[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-Id: <20190816.130529.1610341946658634132.davem@davemloft.net>
Date: Fri, 16 Aug 2019 13:05:29 -0700 (PDT)
From: David Miller <davem@...emloft.net>
To: marek.behun@....cz
Cc: netdev@...r.kernel.org, andrew@...n.ch, vivien.didelot@...il.com,
hkallweit1@...il.com
Subject: Re: [PATCH net-next v2] net: dsa: mv88e6xxx: check for mode change
in port_setup_mac
From: Marek BehĂșn <marek.behun@....cz>
Date: Wed, 14 Aug 2019 16:40:24 +0200
> The mv88e6xxx_port_setup_mac checks if the requested MAC settings are
> different from the current ones, and if not, does nothing (since chaning
> them requires putting the link down).
>
> In this check it only looks if the triplet [link, speed, duplex] is
> being changed.
>
> This patch adds support to also check if the mode parameter (of type
> phy_interface_t) is requested to be changed. The current mode is
> computed by the ->port_link_state() method, and if it is different from
> PHY_INTERFACE_MODE_NA, we check for equality with the requested mode.
>
> In the implementations of the mv88e6250_port_link_state() method we set
> the current mode to PHY_INTERFACE_MODE_NA - so the code does not check
> for mode change on 6250.
>
> In the mv88e6352_port_link_state() method, we use the cached cmode of
> the port to determine the mode as phy_interface_t (and if it is not
> enough, eg. for RGMII, we also look at the port control register for
> RX/TX timings).
>
> Signed-off-by: Marek BehĂșn <marek.behun@....cz>
Applied.
Powered by blists - more mailing lists