| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 16 Aug 2019 22:13:42 +0200
From: Pavel Machek <pavel@....cz>
To: Matthias Kaehlcke <mka@...omium.org>
Cc: "David S . Miller" <davem@...emloft.net>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Heiner Kallweit <hkallweit1@...il.com>, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Douglas Anderson <dianders@...omium.org>
Subject: Re: [PATCH v6 4/4] net: phy: realtek: Add LED configuration support
for RTL8211E
On Tue 2019-08-13 12:11:47, Matthias Kaehlcke wrote:
> Add a .config_led hook which is called by the PHY core when
> configuration data for a PHY LED is available. Each LED can be
> configured to be solid 'off, solid 'on' for certain (or all)
> link speeds or to blink on RX/TX activity.
>
> Signed-off-by: Matthias Kaehlcke <mka@...omium.org>
THis really needs to go through the LED subsystem, and use the same userland
interfaces as the rest of the system.
Sorry.
NAK.
Pavel
> ---
> Changes in v6:
> - return -EOPNOTSUPP if trigger is not supported, don't log warning
> - don't log errors if MDIO ops fail, this is rare and the phy_device
> will log a warning
> - added parentheses around macro argument used in arithmetics to
> avoid possible operator precedence issues
> - minor formatting changes
>
> Changes in v5:
> - use 'config_leds' driver callback instead of requesting the DT
> configuration
> - added support for trigger 'none'
> - always disable EEE LED mode when a LED is configured. We have no
> device data struct to keep track of its state, the number of LEDs
> is limited, so the overhead of disabling it multiple times (once for
> each LED that is configured) during initialization is negligible
> - print warning when disabling EEE LED mode fails
> - updated commit message (previous subject was 'net: phy: realtek:
> configure RTL8211E LEDs')
>
> Changes in v4:
> - use the generic PHY LED binding
> - keep default/current configuration if none is specified
> - added rtl8211e_disable_eee_led_mode()
> - was previously in separate patch, however since we always want to
> disable EEE LED mode when a LED configuration is specified it makes
> sense to just add the function here.
> - don't call phy_restore_page() in rtl8211e_config_leds() if
> selection of the extended page failed.
> - use phydev_warn() instead of phydev_err() if LED configuration
> fails since we don't bail out
> - use hex number to specify page for consistency
> - add hex number to comment about ext page 44 to facilitate searching
>
> Changes in v3:
> - sanity check led-modes values
> - set LACR bits in a more readable way
> - use phydev_err() instead of dev_err()
> - log an error if LED configuration fails
>
> Changes in v2:
> - patch added to the series
> ---
> drivers/net/phy/realtek.c | 90 ++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 89 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
> index a5b3708dc4d8..2bca3b91d43d 100644
> --- a/drivers/net/phy/realtek.c
> +++ b/drivers/net/phy/realtek.c
> @@ -9,8 +9,9 @@
> * Copyright (c) 2004 Freescale Semiconductor, Inc.
> */
> #include <linux/bitops.h>
> -#include <linux/phy.h>
> +#include <linux/bits.h>
> #include <linux/module.h>
> +#include <linux/phy.h>
>
> #define RTL821x_PHYSR 0x11
> #define RTL821x_PHYSR_DUPLEX BIT(13)
> @@ -26,6 +27,19 @@
> #define RTL821x_EXT_PAGE_SELECT 0x1e
> #define RTL821x_PAGE_SELECT 0x1f
>
> +/* RTL8211E page 5 */
> +#define RTL8211E_EEE_LED_MODE1 0x05
> +#define RTL8211E_EEE_LED_MODE2 0x06
> +
> +/* RTL8211E extension page 44 (0x2c) */
> +#define RTL8211E_LACR 0x1a
> +#define RLT8211E_LACR_LEDACTCTRL_SHIFT 4
> +#define RTL8211E_LCR 0x1c
> +
> +#define LACR_MASK(led) BIT(4 + (led))
> +#define LCR_MASK(led) GENMASK(((led) * 4) + 2,\
> + (led) * 4)
> +
> #define RTL8211F_INSR 0x1d
>
> #define RTL8211F_TX_DELAY BIT(8)
> @@ -83,6 +97,79 @@ static int rtl8211x_modify_ext_paged(struct phy_device *phydev, int page,
> return phy_restore_page(phydev, oldpage, ret);
> }
>
> +static void rtl8211e_disable_eee_led_mode(struct phy_device *phydev)
> +{
> + int oldpage;
> + int err = 0;
> +
> + oldpage = phy_select_page(phydev, 5);
> + if (oldpage < 0)
> + goto out;
> +
> + /* write magic values to disable EEE LED mode */
> + err = __phy_write(phydev, RTL8211E_EEE_LED_MODE1, 0x8b82);
> + if (err)
> + goto out;
> +
> + err = __phy_write(phydev, RTL8211E_EEE_LED_MODE2, 0x052b);
> +
> +out:
> + if (err)
> + phydev_warn(phydev, "failed to disable EEE LED mode: %d\n",
> + err);
> +
> + phy_restore_page(phydev, oldpage, err);
> +}
> +
> +static int rtl8211e_config_led(struct phy_device *phydev, int led,
> + struct phy_led_config *cfg)
> +{
> + u16 lacr_bits = 0, lcr_bits = 0;
> + int oldpage, ret;
> +
> + switch (cfg->trigger.t) {
> + case PHY_LED_TRIGGER_LINK:
> + lcr_bits = 7 << (led * 4);
> + break;
> +
> + case PHY_LED_TRIGGER_LINK_10M:
> + lcr_bits = 1 << (led * 4);
> + break;
> +
> + case PHY_LED_TRIGGER_LINK_100M:
> + lcr_bits = 2 << (led * 4);
> + break;
> +
> + case PHY_LED_TRIGGER_LINK_1G:
> + lcr_bits |= 4 << (led * 4);
> + break;
> +
> + case PHY_LED_TRIGGER_NONE:
> + break;
> +
> + default:
> + return -EOPNOTSUPP;
> + }
> +
> + if (cfg->trigger.activity)
> + lacr_bits = BIT(RLT8211E_LACR_LEDACTCTRL_SHIFT + led);
> +
> + rtl8211e_disable_eee_led_mode(phydev);
> +
> + oldpage = rtl8211x_select_ext_page(phydev, 0x2c);
> + if (oldpage < 0)
> + return oldpage;
> +
> + ret = __phy_modify(phydev, RTL8211E_LACR, LACR_MASK(led), lacr_bits);
> + if (ret)
> + goto err;
> +
> + ret = __phy_modify(phydev, RTL8211E_LCR, LCR_MASK(led), lcr_bits);
> +
> +err:
> + return phy_restore_page(phydev, oldpage, ret);
> +}
> +
> static int rtl8201_ack_interrupt(struct phy_device *phydev)
> {
> int err;
> @@ -330,6 +417,7 @@ static struct phy_driver realtek_drvs[] = {
> .config_init = &rtl8211e_config_init,
> .ack_interrupt = &rtl821x_ack_interrupt,
> .config_intr = &rtl8211e_config_intr,
> + .config_led = &rtl8211e_config_led,
> .suspend = genphy_suspend,
> .resume = genphy_resume,
> .read_page = rtl821x_read_page,
> --
> 2.23.0.rc1.153.gdeed80330f-goog
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Powered by blists - more mailing lists