[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <DB7PR04MB46188FBD9DC87E620BBA8838E6AF0@DB7PR04MB4618.eurprd04.prod.outlook.com>
Date: Fri, 16 Aug 2019 06:47:29 +0000
From: Joakim Zhang <qiangqing.zhang@....com>
To: "mkl@...gutronix.de" <mkl@...gutronix.de>,
"linux-can@...r.kernel.org" <linux-can@...r.kernel.org>
CC: "wg@...ndegger.com" <wg@...ndegger.com>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
dl-linux-imx <linux-imx@....com>
Subject: RE: [PATCH] can: flexcan: add LPSR mode support for i.MX7D
Kindly Ping...
Best Regards,
Joakim Zhang
> -----Original Message-----
> From: Joakim Zhang
> Sent: 2019年7月31日 13:57
> To: mkl@...gutronix.de; linux-can@...r.kernel.org
> Cc: wg@...ndegger.com; netdev@...r.kernel.org; dl-linux-imx
> <linux-imx@....com>; Joakim Zhang <qiangqing.zhang@....com>
> Subject: [PATCH] can: flexcan: add LPSR mode support for i.MX7D
>
> For i.MX7D LPSR mode, the controller will lost power and got the configuration
> state lost after system resume back. (coming i.MX8QM/QXP will also
> completely power off the domain, the controller state will be lost and needs
> restore).
> So we need to set pinctrl state again and re-start chip to do re-configuration
> after resume.
>
> For wakeup case, it should not set pinctrl to sleep state by
> pinctrl_pm_select_sleep_state.
> For interface is not up before suspend case, we don't need re-configure as it
> will be configured by user later by interface up.
>
> Signed-off-by: Joakim Zhang <qiangqing.zhang@....com>
> ---
> drivers/net/can/flexcan.c | 21 ++++++++++++++-------
> 1 file changed, 14 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index
> c21b3507123e..228d07e84ddc 100644
> --- a/drivers/net/can/flexcan.c
> +++ b/drivers/net/can/flexcan.c
> @@ -26,6 +26,7 @@
> #include <linux/platform_device.h>
> #include <linux/pm_runtime.h>
> #include <linux/regulator/consumer.h>
> +#include <linux/pinctrl/consumer.h>
> #include <linux/regmap.h>
>
> #define DRV_NAME "flexcan"
> @@ -1889,7 +1890,7 @@ static int __maybe_unused flexcan_suspend(struct
> device *device) {
> struct net_device *dev = dev_get_drvdata(device);
> struct flexcan_priv *priv = netdev_priv(dev);
> - int err = 0;
> + int err;
>
> if (netif_running(dev)) {
> /* if wakeup is enabled, enter stop mode @@ -1899,25 +1900,27
> @@ static int __maybe_unused flexcan_suspend(struct device *device)
> enable_irq_wake(dev->irq);
> flexcan_enter_stop_mode(priv);
> } else {
> - err = flexcan_chip_disable(priv);
> + flexcan_chip_stop(dev);
> +
> + err = pm_runtime_force_suspend(device);
> if (err)
> return err;
>
> - err = pm_runtime_force_suspend(device);
> + pinctrl_pm_select_sleep_state(device);
> }
> netif_stop_queue(dev);
> netif_device_detach(dev);
> }
> priv->can.state = CAN_STATE_SLEEPING;
>
> - return err;
> + return 0;
> }
>
> static int __maybe_unused flexcan_resume(struct device *device) {
> struct net_device *dev = dev_get_drvdata(device);
> struct flexcan_priv *priv = netdev_priv(dev);
> - int err = 0;
> + int err;
>
> priv->can.state = CAN_STATE_ERROR_ACTIVE;
> if (netif_running(dev)) {
> @@ -1926,15 +1929,19 @@ static int __maybe_unused
> flexcan_resume(struct device *device)
> if (device_may_wakeup(device)) {
> disable_irq_wake(dev->irq);
> } else {
> + pinctrl_pm_select_default_state(device);
> +
> err = pm_runtime_force_resume(device);
> if (err)
> return err;
>
> - err = flexcan_chip_enable(priv);
> + err = flexcan_chip_start(dev);
> + if (err)
> + return err;
> }
> }
>
> - return err;
> + return 0;
> }
>
> static int __maybe_unused flexcan_runtime_suspend(struct device *device)
> --
> 2.17.1
Powered by blists - more mailing lists