| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <e0ced3f6-323a-2563-0d2a-5ea8a8931aca@gmail.com>
Date: Sat, 17 Aug 2019 12:29:25 +0200
From: Heiner Kallweit <hkallweit1@...il.com>
To: Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
David Miller <davem@...emloft.net>,
Kevin Hilman <khilman@...libre.com>,
Vivien Didelot <vivien.didelot@...il.com>
Cc: "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"open list:ARM/Amlogic Meson..." <linux-amlogic@...ts.infradead.org>
Subject: [PATCH net-next v3 1/3] net: phy: remove calls to genphy_config_init
Supported PHY features are either auto-detected or explicitly set.
In both cases calling genphy_config_init isn't needed. All that
genphy_config_init does is removing features that are set as
supported but can't be auto-detected. Basically it duplicates the
code in genphy_read_abilities. Therefore remove such calls from
all PHY drivers.
v2:
- remove call also from new adin PHY driver
v3:
- pass NULL as config_init function pointer for dp83848
Signed-off-by: Heiner Kallweit <hkallweit1@...il.com>
---
drivers/net/phy/adin.c | 4 ----
drivers/net/phy/at803x.c | 4 ----
drivers/net/phy/dp83822.c | 5 -----
drivers/net/phy/dp83848.c | 11 +++--------
drivers/net/phy/dp83tc811.c | 4 ----
drivers/net/phy/meson-gxl.c | 2 +-
drivers/net/phy/microchip.c | 1 -
drivers/net/phy/microchip_t1.c | 1 -
drivers/net/phy/mscc.c | 4 ++--
drivers/net/phy/vitesse.c | 6 +++---
10 files changed, 9 insertions(+), 33 deletions(-)
diff --git a/drivers/net/phy/adin.c b/drivers/net/phy/adin.c
index ac79e16cd..4dec83df0 100644
--- a/drivers/net/phy/adin.c
+++ b/drivers/net/phy/adin.c
@@ -356,10 +356,6 @@ static int adin_config_init(struct phy_device *phydev)
phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
- rc = genphy_config_init(phydev);
- if (rc < 0)
- return rc;
-
rc = adin_config_rgmii_mode(phydev);
if (rc < 0)
return rc;
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 222ccd9ec..d98aa5671 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -249,10 +249,6 @@ static int at803x_config_init(struct phy_device *phydev)
{
int ret;
- ret = genphy_config_init(phydev);
- if (ret < 0)
- return ret;
-
/* The RX and TX delay default is:
* after HW reset: RX delay enabled and TX delay disabled
* after SW reset: RX delay enabled, while TX delay retains the
diff --git a/drivers/net/phy/dp83822.c b/drivers/net/phy/dp83822.c
index 7ed4760fb..8a4b1d167 100644
--- a/drivers/net/phy/dp83822.c
+++ b/drivers/net/phy/dp83822.c
@@ -254,13 +254,8 @@ static int dp83822_config_intr(struct phy_device *phydev)
static int dp83822_config_init(struct phy_device *phydev)
{
- int err;
int value;
- err = genphy_config_init(phydev);
- if (err < 0)
- return err;
-
value = DP83822_WOL_MAGIC_EN | DP83822_WOL_SECURE_ON | DP83822_WOL_EN;
return phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG,
diff --git a/drivers/net/phy/dp83848.c b/drivers/net/phy/dp83848.c
index 6f9bc7d91..54c7c1b44 100644
--- a/drivers/net/phy/dp83848.c
+++ b/drivers/net/phy/dp83848.c
@@ -68,13 +68,8 @@ static int dp83848_config_intr(struct phy_device *phydev)
static int dp83848_config_init(struct phy_device *phydev)
{
- int err;
int val;
- err = genphy_config_init(phydev);
- if (err < 0)
- return err;
-
/* DP83620 always reports Auto Negotiation Ability on BMSR. Instead,
* we check initial value of BMCR Auto negotiation enable bit
*/
@@ -113,13 +108,13 @@ MODULE_DEVICE_TABLE(mdio, dp83848_tbl);
static struct phy_driver dp83848_driver[] = {
DP83848_PHY_DRIVER(TI_DP83848C_PHY_ID, "TI DP83848C 10/100 Mbps PHY",
- genphy_config_init),
+ NULL),
DP83848_PHY_DRIVER(NS_DP83848C_PHY_ID, "NS DP83848C 10/100 Mbps PHY",
- genphy_config_init),
+ NULL),
DP83848_PHY_DRIVER(TI_DP83620_PHY_ID, "TI DP83620 10/100 Mbps PHY",
dp83848_config_init),
DP83848_PHY_DRIVER(TLK10X_PHY_ID, "TI TLK10X 10/100 Mbps PHY",
- genphy_config_init),
+ NULL),
};
module_phy_driver(dp83848_driver);
diff --git a/drivers/net/phy/dp83tc811.c b/drivers/net/phy/dp83tc811.c
index ac27da168..06f08832e 100644
--- a/drivers/net/phy/dp83tc811.c
+++ b/drivers/net/phy/dp83tc811.c
@@ -277,10 +277,6 @@ static int dp83811_config_init(struct phy_device *phydev)
{
int value, err;
- err = genphy_config_init(phydev);
- if (err < 0)
- return err;
-
value = phy_read(phydev, MII_DP83811_SGMII_CTRL);
if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
err = phy_write(phydev, MII_DP83811_SGMII_CTRL,
diff --git a/drivers/net/phy/meson-gxl.c b/drivers/net/phy/meson-gxl.c
index fa80d6dce..e8f2ca625 100644
--- a/drivers/net/phy/meson-gxl.c
+++ b/drivers/net/phy/meson-gxl.c
@@ -136,7 +136,7 @@ static int meson_gxl_config_init(struct phy_device *phydev)
if (ret)
return ret;
- return genphy_config_init(phydev);
+ return 0;
}
/* This function is provided to cope with the possible failures of this phy
diff --git a/drivers/net/phy/microchip.c b/drivers/net/phy/microchip.c
index eb1b3287f..a644e8e50 100644
--- a/drivers/net/phy/microchip.c
+++ b/drivers/net/phy/microchip.c
@@ -305,7 +305,6 @@ static int lan88xx_config_init(struct phy_device *phydev)
{
int val;
- genphy_config_init(phydev);
/*Zerodetect delay enable */
val = phy_read_mmd(phydev, MDIO_MMD_PCS,
PHY_ARDENNES_MMD_DEV_3_PHY_CFG);
diff --git a/drivers/net/phy/microchip_t1.c b/drivers/net/phy/microchip_t1.c
index 3d09b4716..001def450 100644
--- a/drivers/net/phy/microchip_t1.c
+++ b/drivers/net/phy/microchip_t1.c
@@ -48,7 +48,6 @@ static struct phy_driver microchip_t1_phy_driver[] = {
.features = PHY_BASIC_T1_FEATURES,
- .config_init = genphy_config_init,
.config_aneg = genphy_config_aneg,
.ack_interrupt = lan87xx_phy_ack_interrupt,
diff --git a/drivers/net/phy/mscc.c b/drivers/net/phy/mscc.c
index 645d354ff..7ada1fd9c 100644
--- a/drivers/net/phy/mscc.c
+++ b/drivers/net/phy/mscc.c
@@ -1725,7 +1725,7 @@ static int vsc8584_config_init(struct phy_device *phydev)
return ret;
}
- return genphy_config_init(phydev);
+ return 0;
err:
mutex_unlock(&phydev->mdio.bus->mdio_lock);
@@ -1767,7 +1767,7 @@ static int vsc85xx_config_init(struct phy_device *phydev)
return rc;
}
- return genphy_config_init(phydev);
+ return 0;
}
static int vsc8584_did_interrupt(struct phy_device *phydev)
diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c
index 43691b1ac..bb6803527 100644
--- a/drivers/net/phy/vitesse.c
+++ b/drivers/net/phy/vitesse.c
@@ -197,7 +197,7 @@ static int vsc738x_config_init(struct phy_device *phydev)
vsc73xx_config_init(phydev);
- return genphy_config_init(phydev);
+ return 0;
}
static int vsc739x_config_init(struct phy_device *phydev)
@@ -229,7 +229,7 @@ static int vsc739x_config_init(struct phy_device *phydev)
vsc73xx_config_init(phydev);
- return genphy_config_init(phydev);
+ return 0;
}
static int vsc73xx_config_aneg(struct phy_device *phydev)
@@ -267,7 +267,7 @@ static int vsc8601_config_init(struct phy_device *phydev)
if (ret < 0)
return ret;
- return genphy_config_init(phydev);
+ return 0;
}
static int vsc824x_ack_interrupt(struct phy_device *phydev)
--
2.22.1
Powered by blists - more mailing lists