| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190817132825.29790-1-idosch@idosch.org>
Date: Sat, 17 Aug 2019 16:28:09 +0300
From: Ido Schimmel <idosch@...sch.org>
To: netdev@...r.kernel.org
Cc: davem@...emloft.net, nhorman@...driver.com, jiri@...lanox.com,
toke@...hat.com, dsahern@...il.com, roopa@...ulusnetworks.com,
nikolay@...ulusnetworks.com, jakub.kicinski@...ronome.com,
andy@...yhouse.net, f.fainelli@...il.com, andrew@...n.ch,
vivien.didelot@...il.com, mlxsw@...lanox.com,
Ido Schimmel <idosch@...lanox.com>
Subject: [PATCH net-next v3 00/16] Add drop monitor for offloaded data paths
From: Ido Schimmel <idosch@...lanox.com>
Users have several ways to debug the kernel and understand why a packet
was dropped. For example, using drop monitor and perf. Both utilities
trace kfree_skb(), which is the function called when a packet is freed
as part of a failure. The information provided by these tools is
invaluable when trying to understand the cause of a packet loss.
In recent years, large portions of the kernel data path were offloaded
to capable devices. Today, it is possible to perform L2 and L3
forwarding in hardware, as well as tunneling (IP-in-IP and VXLAN).
Different TC classifiers and actions are also offloaded to capable
devices, at both ingress and egress.
However, when the data path is offloaded it is not possible to achieve
the same level of introspection since packets are dropped by the
underlying device and never reach the kernel.
This patchset aims to solve this by allowing users to monitor packets
that the underlying device decided to drop along with relevant metadata
such as the drop reason and ingress port.
The above is achieved by exposing a fundamental capability of devices
capable of data path offloading - packet trapping. In much the same way
as drop monitor registers its probe function with the kfree_skb()
tracepoint, the device is instructed to pass to the CPU (trap) packets
that it decided to drop in various places in the pipeline.
The configuration of the device to pass such packets to the CPU is
performed using devlink, as it is not specific to a port, but rather to
a device. In the future, we plan to control the policing of such packets
using devlink, in order not to overwhelm the CPU.
While devlink is used as the control path, the dropped packets are
passed along with metadata to drop monitor, which reports them to
userspace as netlink events. This allows users to use the same interface
for the monitoring of both software and hardware drops.
Logically, the solution looks as follows:
Netlink event: Packet w/ metadata
Or a summary of recent drops
^
|
Userspace |
+---------------------------------------------------+
Kernel |
|
+-------+--------+
| |
| drop_monitor |
| |
+-------^--------+
|
|
|
+----+----+
| | Kernel's Rx path
| devlink | (non-drop traps)
| |
+----^----+ ^
| |
+-----------+
|
+-------+-------+
| |
| Device driver |
| |
+-------^-------+
Kernel |
+---------------------------------------------------+
Hardware |
| Trapped packet
|
+--+---+
| |
| ASIC |
| |
+------+
In order to reduce the patch count, this patchset only includes
integration with netdevsim. A follow-up patchset will add devlink-trap
support in mlxsw.
Patches #1-#7 extend drop monitor to also monitor hardware originated
drops.
Patches #8-#10 add the devlink-trap infrastructure.
Patches #11-#12 add devlink-trap support in netdevsim.
Patches #13-#16 add tests for the generic infrastructure over netdevsim.
Example
=======
Instantiate netdevsim
---------------------
# echo "10 1" > /sys/bus/netdevsim/new_device
# ip link set dev eth0 up
List supported traps
--------------------
# devlink trap show
netdevsim/netdevsim10:
name source_mac_is_multicast type drop generic true action drop group l2_drops
name vlan_tag_mismatch type drop generic true action drop group l2_drops
name ingress_vlan_filter type drop generic true action drop group l2_drops
name ingress_spanning_tree_filter type drop generic true action drop group l2_drops
name port_list_is_empty type drop generic true action drop group l2_drops
name port_loopback_filter type drop generic true action drop group l2_drops
name fid_miss type exception generic false action trap group l2_drops
name blackhole_route type drop generic true action drop group l3_drops
name ttl_value_is_too_small type exception generic true action trap group l3_drops
name tail_drop type drop generic true action drop group buffer_drops
Enable a trap
-------------
# devlink trap set netdevsim/netdevsim10 trap blackhole_route action trap
Query statistics
----------------
# devlink -s trap show netdevsim/netdevsim10 trap blackhole_route
netdevsim/netdevsim10:
name blackhole_route type drop generic true action trap group l3_drops
stats:
rx:
bytes 7384 packets 52
Monitor dropped packets
-----------------------
dropwatch> set alertmode packet
Setting alert mode
Alert mode successfully set
dropwatch> set sw true
setting software drops monitoring to 1
dropwatch> set hw true
setting hardware drops monitoring to 1
dropwatch> start
Enabling monitoring...
Kernel monitoring activated.
Issue Ctrl-C to stop monitoring
drop at: ttl_value_is_too_small (l3_drops)
origin: hardware
input port ifindex: 55
input port name: eth0
timestamp: Mon Aug 12 10:52:20 2019 445911505 nsec
protocol: 0x800
length: 142
original length: 142
drop at: ip6_mc_input+0x8b8/0xef8 (0xffffffff9e2bb0e8)
origin: software
input port ifindex: 4
timestamp: Mon Aug 12 10:53:37 2019 024444587 nsec
protocol: 0x86dd
length: 110
original length: 110
Future plans
============
* Provide more drop reasons as well as more metadata
* Add dropmon support to libpcap, so that tcpdump/tshark could
specifically listen on dropmon traffic, instead of capturing all
netlink packets via nlmon interface
Changes in v3:
* Place test with the rest of the netdevsim tests
* Fix test to load netdevsim module
* Move devlink helpers from the test to devlink_lib.sh. Will be used
by mlxsw tests
* Re-order netdevsim includes in alphabetical order
* Fix reverse xmas tree in netdevsim
* Remove double include in netdevsim
Changes in v2:
* Use drop monitor to report dropped packets instead of devlink
* Add drop monitor patches
* Add test cases
Ido Schimmel (16):
drop_monitor: Move per-CPU data init/fini to separate functions
drop_monitor: Initialize hardware per-CPU data
drop_monitor: Add basic infrastructure for hardware drops
drop_monitor: Consider all monitoring states before performing
configuration
drop_monitor: Add support for packet alert mode for hardware drops
drop_monitor: Add support for summary alert mode for hardware drops
drop_monitor: Allow user to start monitoring hardware drops
devlink: Add packet trap infrastructure
devlink: Add generic packet traps and groups
Documentation: Add devlink-trap documentation
netdevsim: Add devlink-trap support
Documentation: Add description of netdevsim traps
selftests: forwarding: devlink_lib: Allow tests to define devlink
device
selftests: forwarding: devlink_lib: Add devlink-trap helpers
selftests: devlink_trap: Add test cases for devlink-trap
Documentation: Add a section for devlink-trap testing
.../networking/devlink-trap-netdevsim.rst | 20 +
Documentation/networking/devlink-trap.rst | 208 ++++
Documentation/networking/index.rst | 2 +
MAINTAINERS | 1 +
drivers/net/netdevsim/dev.c | 282 ++++-
drivers/net/netdevsim/netdevsim.h | 1 +
include/net/devlink.h | 175 +++
include/net/drop_monitor.h | 33 +
include/uapi/linux/devlink.h | 62 +
include/uapi/linux/net_dropmon.h | 15 +
net/Kconfig | 1 +
net/core/devlink.c | 1080 ++++++++++++++++-
net/core/drop_monitor.c | 724 ++++++++++-
.../drivers/net/netdevsim/devlink_trap.sh | 364 ++++++
.../selftests/net/forwarding/devlink_lib.sh | 189 ++-
15 files changed, 3116 insertions(+), 41 deletions(-)
create mode 100644 Documentation/networking/devlink-trap-netdevsim.rst
create mode 100644 Documentation/networking/devlink-trap.rst
create mode 100644 include/net/drop_monitor.h
create mode 100755 tools/testing/selftests/drivers/net/netdevsim/devlink_trap.sh
--
2.21.0
Powered by blists - more mailing lists