netdev - [PATCH v2 net-next] net: fec: add C45 MDIO read/write support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1566387814-7034-1-git-send-email-marco.hartmann@nxp.com>
Date:   Wed, 21 Aug 2019 11:43:49 +0000
From:   Marco Hartmann <marco.hartmann@....com>
To:     Andy Duan <fugang.duan@....com>,
        "davem@...emloft.net" <davem@...emloft.net>,
        "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        Christian Herber <christian.herber@....com>,
        Marco Hartmann <marco.hartmann@....com>
Subject: [PATCH v2 net-next] net: fec: add C45 MDIO read/write support

IEEE 802.3ae clause 45 defines a modified MDIO protocol that uses a two
staged access model in order to increase the address space.

This patch adds support for C45 MDIO read and write accesses, which are
used whenever the MII_ADDR_C45 flag in the regnum argument is set.
In case it is not set, C22 accesses are used as before.

Signed-off-by: Marco Hartmann <marco.hartmann@....com>
---
Changes in v2:
- use bool variable is_c45
- add missing goto statements
---
---
 drivers/net/ethernet/freescale/fec_main.c | 70 ++++++++++++++++++++++++++++---
 1 file changed, 64 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index c01d3ec3e9af..cb3ce27fb27a 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -208,8 +208,11 @@ MODULE_PARM_DESC(macaddr, "FEC Ethernet MAC address");
 
 /* FEC MII MMFR bits definition */
 #define FEC_MMFR_ST		(1 << 30)
+#define FEC_MMFR_ST_C45		(0)
 #define FEC_MMFR_OP_READ	(2 << 28)
+#define FEC_MMFR_OP_READ_C45	(3 << 28)
 #define FEC_MMFR_OP_WRITE	(1 << 28)
+#define FEC_MMFR_OP_ADDR_WRITE	(0)
 #define FEC_MMFR_PA(v)		((v & 0x1f) << 23)
 #define FEC_MMFR_RA(v)		((v & 0x1f) << 18)
 #define FEC_MMFR_TA		(2 << 16)
@@ -1767,7 +1770,8 @@ static int fec_enet_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
 	struct fec_enet_private *fep = bus->priv;
 	struct device *dev = &fep->pdev->dev;
 	unsigned long time_left;
-	int ret = 0;
+	int ret = 0, frame_start, frame_addr, frame_op;
+	bool is_c45 = !!(regnum & MII_ADDR_C45);
 
 	ret = pm_runtime_get_sync(dev);
 	if (ret < 0)
@@ -1775,9 +1779,37 @@ static int fec_enet_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
 
 	reinit_completion(&fep->mdio_done);
 
+	if (is_c45) {
+		frame_start = FEC_MMFR_ST_C45;
+
+		/* write address */
+		frame_addr = (regnum >> 16);
+		writel(frame_start | FEC_MMFR_OP_ADDR_WRITE |
+		       FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(frame_addr) |
+		       FEC_MMFR_TA | (regnum & 0xFFFF),
+		       fep->hwp + FEC_MII_DATA);
+
+		/* wait for end of transfer */
+		time_left = wait_for_completion_timeout(&fep->mdio_done,
+				usecs_to_jiffies(FEC_MII_TIMEOUT));
+		if (time_left == 0) {
+			netdev_err(fep->netdev, "MDIO address write timeout\n");
+			ret = -ETIMEDOUT;
+			goto out;
+		}
+
+		frame_op = FEC_MMFR_OP_READ_C45;
+
+	} else {
+		/* C22 read */
+		frame_op = FEC_MMFR_OP_READ;
+		frame_start = FEC_MMFR_ST;
+		frame_addr = regnum;
+	}
+
 	/* start a read op */
-	writel(FEC_MMFR_ST | FEC_MMFR_OP_READ |
-		FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(regnum) |
+	writel(frame_start | frame_op |
+		FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(frame_addr) |
 		FEC_MMFR_TA, fep->hwp + FEC_MII_DATA);
 
 	/* wait for end of transfer */
@@ -1804,7 +1836,8 @@ static int fec_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
 	struct fec_enet_private *fep = bus->priv;
 	struct device *dev = &fep->pdev->dev;
 	unsigned long time_left;
-	int ret;
+	int ret, frame_start, frame_addr;
+	bool is_c45 = !!(regnum & MII_ADDR_C45);
 
 	ret = pm_runtime_get_sync(dev);
 	if (ret < 0)
@@ -1814,9 +1847,33 @@ static int fec_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
 
 	reinit_completion(&fep->mdio_done);
 
+	if (is_c45) {
+		frame_start = FEC_MMFR_ST_C45;
+
+		/* write address */
+		frame_addr = (regnum >> 16);
+		writel(frame_start | FEC_MMFR_OP_ADDR_WRITE |
+		       FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(frame_addr) |
+		       FEC_MMFR_TA | (regnum & 0xFFFF),
+		       fep->hwp + FEC_MII_DATA);
+
+		/* wait for end of transfer */
+		time_left = wait_for_completion_timeout(&fep->mdio_done,
+			usecs_to_jiffies(FEC_MII_TIMEOUT));
+		if (time_left == 0) {
+			netdev_err(fep->netdev, "MDIO address write timeout\n");
+			ret = -ETIMEDOUT;
+			goto out;
+		}
+	} else {
+		/* C22 write */
+		frame_start = FEC_MMFR_ST;
+		frame_addr = regnum;
+	}
+
 	/* start a write op */
-	writel(FEC_MMFR_ST | FEC_MMFR_OP_WRITE |
-		FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(regnum) |
+	writel(frame_start | FEC_MMFR_OP_WRITE |
+		FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(frame_addr) |
 		FEC_MMFR_TA | FEC_MMFR_DATA(value),
 		fep->hwp + FEC_MII_DATA);
 
@@ -1828,6 +1885,7 @@ static int fec_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
 		ret  = -ETIMEDOUT;
 	}
 
+out:
 	pm_runtime_mark_last_busy(dev);
 	pm_runtime_put_autosuspend(dev);
 
-- 
2.7.4