lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190823233750.7997-6-jeffrey.t.kirsher@intel.com>
Date:   Fri, 23 Aug 2019 16:37:41 -0700
From:   Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To:     davem@...emloft.net
Cc:     Michal Swiatkowski <michal.swiatkowski@...el.com>,
        netdev@...r.kernel.org, nhorman@...hat.com, sassmann@...hat.com,
        Andrew Bowers <andrewx.bowers@...el.com>,
        Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next 05/14] ice: Copy dcbx configuration only if mode is correct

From: Michal Swiatkowski <michal.swiatkowski@...el.com>

In rebuild DCB desired_dcbx_cfg was copy to local_dcbx_cfg, but
if DCBX mode is IEEE desired_dcbx_cfg is not initialized by DCBX
config from FW. Change logic to copy config value only if mode is
set to CEE.

If driver copy desired_dcbx_cfg to local_dcbx_cfg in IEEE mode there
is problem with globr. System is frozen after two or more globr.

Signed-off-by: Michal Swiatkowski <michal.swiatkowski@...el.com>
Tested-by: Andrew Bowers <andrewx.bowers@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
 drivers/net/ethernet/intel/ice/ice_dcb_lib.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_dcb_lib.c b/drivers/net/ethernet/intel/ice/ice_dcb_lib.c
index 22bdc244c7e0..4fc9faf5bc71 100644
--- a/drivers/net/ethernet/intel/ice/ice_dcb_lib.c
+++ b/drivers/net/ethernet/intel/ice/ice_dcb_lib.c
@@ -334,8 +334,10 @@ void ice_dcb_rebuild(struct ice_pf *pf)
 	devm_kfree(&pf->pdev->dev, prev_cfg);
 
 	/* Set the local desired config */
-	memset(&pf->hw.port_info->local_dcbx_cfg, 0, sizeof(*local_dcbx_cfg));
-	memcpy(local_dcbx_cfg, desired_dcbx_cfg, sizeof(*local_dcbx_cfg));
+	if (local_dcbx_cfg->dcbx_mode == ICE_DCBX_MODE_CEE)
+		memcpy(local_dcbx_cfg, desired_dcbx_cfg,
+		       sizeof(*local_dcbx_cfg));
+
 	ice_cfg_etsrec_defaults(pf->hw.port_info);
 	ret = ice_set_dcb_cfg(pf->hw.port_info);
 	if (ret) {
-- 
2.21.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ