netdev - Re: Aw: [PATCH net-next v3 0/3] net: ethernet: mediatek: convert to PHYLINK

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20190824074103.Horde.ytG2fquC9xJKq5TL79l6J0M@www.vdorst.com>
Date:   Sat, 24 Aug 2019 07:41:03 +0000
From:   René van Dorst <opensource@...rst.com>
To:     Frank Wunderlich <frank-w@...lic-files.de>
Cc:     John Crispin <john@...ozen.org>,
        Sean Wang <sean.wang@...iatek.com>,
        Nelson Chang <nelson.chang@...iatek.com>,
        "David S . Miller" <davem@...emloft.net>,
        Matthias Brugger <matthias.bgg@...il.com>,
        netdev@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-mediatek@...ts.infradead.org, linux-mips@...r.kernel.org,
        Russell King <linux@...linux.org.uk>, Stefan Roese <sr@...x.de>
Subject: Re: Aw: [PATCH net-next v3 0/3] net: ethernet: mediatek: convert to
 PHYLINK

Hi Frank,

Quoting Frank Wunderlich <frank-w@...lic-files.de>:

> tested on bpi-r2 (mt7623/mt7530) and bpi-r64 (mt7622/rtl8367)
>

Thanks for testing!

> as reported to rene directly rx-path needs some rework because  
> current rx-speed
> on bpi-r2 is 865 Mbits/sec instead of ~940 Mbits/sec

I still think it is a result of the extra code in the rx path when mt76x8
was introduced.

Greats,

René

>
> Tested-by: Frank Wunderlich <frank-w@...lic-files.de>
>
> regards Frank
>
>
>> Gesendet: Freitag, 23. August 2019 um 15:45 Uhr
>> Von: "René van Dorst" <opensource@...rst.com>
>> An: "John Crispin" <john@...ozen.org>, "Sean Wang"  
>> <sean.wang@...iatek.com>, "Nelson Chang"  
>> <nelson.chang@...iatek.com>, "David S . Miller"  
>> <davem@...emloft.net>, "Matthias Brugger" <matthias.bgg@...il.com>
>> Cc: netdev@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,  
>> linux-mediatek@...ts.infradead.org, linux-mips@...r.kernel.org,  
>> "Russell King" <linux@...linux.org.uk>, "Frank Wunderlich"  
>> <frank-w@...lic-files.de>, "Stefan Roese" <sr@...x.de>, "René van  
>> Dorst" <opensource@...rst.com>
>> Betreff: [PATCH net-next v3 0/3] net: ethernet: mediatek: convert to PHYLINK
>>
>> These patches converts mediatek driver to PHYLINK API.
>>
>> v2->v3:
>> * Phylink improvements and clean-ups after review
>> v1->v2:
>> * Rebase for mt76x8 changes
>> * Phylink improvements and clean-ups after review
>> * SGMII port doesn't support 2.5Gbit in SGMII mode only in BASE-X mode.
>>   Refactor the code.
>>
>> René van Dorst (3):
>>   net: ethernet: mediatek: Add basic PHYLINK support
>>   net: ethernet: mediatek: Re-add support SGMII
>>   dt-bindings: net: ethernet: Update mt7622 docs and dts to reflect the
>>     new phylink API
>>
>>  .../arm/mediatek/mediatek,sgmiisys.txt        |   2 -
>>  .../dts/mediatek/mt7622-bananapi-bpi-r64.dts  |  28 +-
>>  arch/arm64/boot/dts/mediatek/mt7622.dtsi      |   1 -
>>  drivers/net/ethernet/mediatek/Kconfig         |   2 +-
>>  drivers/net/ethernet/mediatek/mtk_eth_path.c  |  75 +--
>>  drivers/net/ethernet/mediatek/mtk_eth_soc.c   | 529 ++++++++++++------
>>  drivers/net/ethernet/mediatek/mtk_eth_soc.h   |  68 ++-
>>  drivers/net/ethernet/mediatek/mtk_sgmii.c     |  65 ++-
>>  8 files changed, 477 insertions(+), 293 deletions(-)
>>
>> --
>> 2.20.1
>>
>>