| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <34ba28aa-44a5-8a6c-c8c4-b92a16f952ad@toxcorp.com>
Date: Wed, 28 Aug 2019 01:01:02 +0200
From: Jakub Jankowski <shasta@...corp.com>
To: "Fujinaka, Todd" <todd.fujinaka@...el.com>,
"e1000-devel@...ts.sourceforge.net"
<e1000-devel@...ts.sourceforge.net>
Cc: "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"mhemsley@...n-systems.com" <mhemsley@...n-systems.com>
Subject: Re: [E1000-devel] SFP+ EEPROM readouts fail on X722 (ethtool -m:
Invalid argument)
Hi,
On 8/27/19 7:56 PM, Fujinaka, Todd wrote:
> The hints should be:
> # ethtool -m eth10
> Cannot get module EEPROM information: Invalid argument # dmesg | tail -n 1 [ 445.971974] i40e 0000:3d:00.3 eth10: Module EEPROM memory read not supported. Please update the NVM image.
>
> # ethtool -i eth10
> driver: i40e
> version: 2.9.21
> firmware-version: 3.31 0x80000d31 1.1767.0
>
> And the working case:
> # ethtool -i eth8
> driver: i40e
> version: 2.9.21
> firmware-version: 6.01 0x800035cf 1.1876.0
>
> If you don't see it, 6.01 > 3.31.
The reason why firmware between the two is (that much) different is
because the non-working case is from X722 NIC, while the working one is
from X710.
> The NVM update tool should be available on downloadcenter.intel.com
Thanks for the pointer to NVM updater. I'd like to offer some additional
comments about my experience with the newest one (v4.00):
a) running ./nvmupdate64e (from X722_NVMUpdate_Linux_x64 subdir) errors
out without really saying what's wrong:
# ./nvmupdate64e
Intel(R) Ethernet NVM Update Tool
NVMUpdate version 1.30.2.11
Copyright (C) 2013 - 2017 Intel Corporation.
WARNING: To avoid damage to your device, do not stop the update or
reboot or power off the system during this update.
Inventory in progress. Please wait [+.........]
Tool execution completed with the following status: The configuration
file could not be opened/read, or a syntax error was discovered in the file
Press any key to exit.
after enabling logging (-l out.log) a bit more is revealed:
# tail -n 2 out.log
Error: Config file line 2: Not supported config file version.
Error: Missing CONFIG VERSION parameter in configuration file.
but that's not entirely true, CONFIG VERSION is set in the default
configuration file:
# head -n 2 nvmupdate.cfg
CURRENT FAMILY: 1.0.0
CONFIG VERSION: 1.14.0
so why isn't this understood?
Manually editing nvmupdate.cfg and setting CONFIG VERSION: 1.11.0 seems
to make this particular problem go away.
b) Re-doing this with downgraded config version exposes another problem:
Config file read.
Error: Can't open NVM map file [Immediate_offset_2.txt]
and indeed, there is no Immediate_offset_2.txt in
NVMUpdatePackage_WFT_WFQ&WF0_v4.00/X722_NVMUpdate_Linux_x64/
There is one, however, in
NVMUpdatePackage_WFT_WFQ&WF0_v4.00/X722_NVMUpdate_EFIx64/ subdir.
Copying it over to the _Linux_x64 resolves this particular problem
c) Re-doing this with Immediate_offset_2.txt in place exposes third problem:
Error: Can't open NVM image file
[LBG_B2_Wolf_Pass_WFT_X557_P01_PHY_Auto_Detect_P23_NCSI_v3.31_800016DB.bin]
and once again - same story. It exists in
NVMUpdatePackage_WFT_WFQ&WF0_v4.00/X722_NVMUpdate_EFIx64/ but not
NVMUpdatePackage_WFT_WFQ&WF0_v4.00/X722_NVMUpdate_Linux_x64/ - had to
copy it over.
Once I managed to get all these out of the way, the tool finally ran:
Num Description Ver. DevId S:B Status
=== ======================================== ===== ===== ======
===============
01) Intel(R) Ethernet Server Adapter I350-T4 1.99 1521 00:024
Update not
available
02) Intel(R) Ethernet Connection X722 for 3.49 37D2 00:061 Update
10GBASE-T available
03) Intel(R) Ethernet Server Adapter I350-T4 1.99 1521 00:175
Update not
available
The initial starting point was:
0) firmware-version: 3.31 0x80000d31 1.1767.0
After first update+reboot, this was bumped to:
1) firmware-version: 3.1d 0x800016db 1.1767.0 (but ethtool -m ethX
still doesn't work)
So I ran the tool the second time, it said 'Update available' again, but
this time:
Num Description Ver. DevId S:B Status
=== ======================================== ===== ===== ======
===============
01) Intel(R) Ethernet Server Adapter I350-T4 1.99 1521 00:024
Update not
available
02) Intel(R) Ethernet Connection X722 for 3.29 37D2 00:061 Update
10GBASE-T available
03) Intel(R) Ethernet Server Adapter I350-T4 1.99 1521 00:175
Update not
available
Options: Adapter Index List (comma-separated), [A]ll, e[X]it
Enter selection:02
Would you like to back up the NVM images? [Y]es/[N]o: Y
Update in progress. This operation may take several minutes.
[*******+..]
Tool execution completed with the following status: <---------- why
is there no status printed?
Press any key to exit.
Checking output log:
# cat out3.log
Intel(R) Ethernet NVM Update Tool
NVMUpdate version 1.30.2.11
Copyright (C) 2013 - 2017 Intel Corporation.
./nvmupdate64e -c nvmupdate.cfg -l out3.log
Config file read.
Inventory
[00:061:00:00]: Intel(R) Ethernet Connection X722 for 10GBASE-T
Flash inventory started
Shadow RAM inventory started
Alternate MAC address is not set
Shadow RAM inventory finished
Flash inventory finished
OROM inventory started
OROM inventory finished
PHY NVM inventory started
PHY NVM inventory finished
[00:061:00:01]: Intel(R) Ethernet Connection X722 for 10GBASE-T
Device already inventoried.
[00:061:00:02]: Intel(R) Ethernet Connection X722 for 10GbE SFP+
Device already inventoried.
PHY NVM inventory started
PHY NVM inventory finished
[00:061:00:03]: Intel(R) Ethernet Connection X722 for 10GbE SFP+
Device already inventoried.
Update
[00:061:00:00]: Intel(R) Ethernet Connection X722 for 10GBASE-T
Creating backup images in directory: A4BF0164884A
Backup images created.
Flash update started
NVM image verification started
Shadow RAM image verification started
Image differences found at offset 0x3AE [Device=0xF, Buffer=0x0] -
update required.
Error: Flash update failed
[00:061:00:02]: Intel(R) Ethernet Connection X722 for 10GbE SFP+
#
However, ethtool -i suggests that firmware was updated to:
2) firmware-version: 4.00 0x80001577 1.1580.0 <------- so it did
_something_ after all?
At this point, every subsequent attempt to run the NVM updater yields
the same results: an update is available, but attempting to apply it
fails with the same message in log.
And my initial issue still persists - ethtool -m <iface> still returns
"invalid argument" with "Module EEPROM memory read not supported. Please
update the NVM image" logged in dmesg.
How can I resolve this?
Cheers,
Jakub.
>
> Todd Fujinaka
> Software Application Engineer
> Datacenter Engineering Group
> Intel Corporation
> todd.fujinaka@...el.com
>
>
> -----Original Message-----
> From: Jakub Jankowski [mailto:shasta@...corp.com]
> Sent: Tuesday, August 27, 2019 4:03 AM
> To: e1000-devel@...ts.sourceforge.net
> Cc: netdev@...r.kernel.org; shasta@...corp.com; mhemsley@...n-systems.com
> Subject: [E1000-devel] SFP+ EEPROM readouts fail on X722 (ethtool -m: Invalid argument)
>
> Hi,
>
> We can't get SFP+ EEPROM readouts for X722 to work at all:
>
> # ethtool -m eth10
> Cannot get module EEPROM information: Invalid argument # dmesg | tail -n 1 [ 445.971974] i40e 0000:3d:00.3 eth10: Module EEPROM memory read not supported. Please update the NVM image.
> # lspci | grep 3d:00.3
> 3d:00.3 Ethernet controller: Intel Corporation Ethernet Connection X722 for 10GbE SFP+ (rev 09)
>
>
> We're running 4.19.65 kernel at the moment, testing using the newest out-of-tree Intel module
>
> # modinfo -F version i40e
> 2.9.21
>
> We also tried:
> - 4.19.65 with in-tree i40e (2.3.2-k)
> - stock Arch Linux (kernel 5.2.5, driver 2.8.20-k) and the results are the same, as shown above.
>
> # ethtool -i eth10
> driver: i40e
> version: 2.9.21
> firmware-version: 3.31 0x80000d31 1.1767.0
> expansion-rom-version:
> bus-info: 0000:3d:00.3
> supports-statistics: yes
> supports-test: yes
> supports-eeprom-access: yes
> supports-register-dump: yes
> supports-priv-flags: yes
> # dmidecode -s baseboard-manufacturer
> Intel Corporation
> # dmidecode -s baseboard-product-name
> S2600WFT
> # dmidecode -s baseboard-version
> H48104-853
>
> # lspci -vvv
> (...)
> 3d:00.3 Ethernet controller: Intel Corporation Ethernet Connection X722 for 10GbE SFP+ (rev 09)
> DeviceName: Intel PCH Integrated 10 Gigabit Ethernet Controller
> Subsystem: Intel Corporation Ethernet Connection X722 for 10GbE SFP+
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 112
> NUMA node: 0
> Region 0: Memory at ab000000 (64-bit, prefetchable) [size=16M]
> Region 3: Memory at b0000000 (64-bit, prefetchable) [size=32K]
> Expansion ROM at <ignored> [disabled]
> Capabilities: [40] Power Management version 3
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
> Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
> Address: 0000000000000000 Data: 0000
> Masking: 00000000 Pending: 00000000
> Capabilities: [70] MSI-X: Enable+ Count=129 Masked-
> Vector table: BAR=3 offset=00000000
> PBA: BAR=3 offset=00001000
> Capabilities: [a0] Express (v2) Endpoint, MSI 00
> DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
> ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0.000W
> DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
> RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop- FLReset-
> MaxPayload 256 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
> ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s (ok), Width x1 (ok)
> TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> DevCap2: Completion Timeout: Range AB, TimeoutDis+, LTR-, OBFF Not Supported
> AtomicOpsCap: 32bit- 64bit- 128bitCAS-
> DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
> AtomicOpsCtl: ReqEn-
> LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
> EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
> Capabilities: [e0] Vital Product Data
> Product Name: Example VPD
> Read-only fields:
> [V0] Vendor specific:
> [RV] Reserved: checksum good, 0 byte(s) reserved
> End
> Capabilities: [100 v2] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
> UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
> AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-
> MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
> HeaderLog: 00000000 00000000 00000000 00000000
> Capabilities: [150 v1] Alternative Routing-ID Interpretation (ARI)
> ARICap: MFVC- ACS-, Next Function: 0
> ARICtl: MFVC- ACS-, Function Group: 0
> Capabilities: [160 v1] Single Root I/O Virtualization (SR-IOV)
> IOVCap: Migration-, Interrupt Message Number: 000
> IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy-
> IOVSta: Migration-
> Initial VFs: 32, Total VFs: 32, Number of VFs: 0, Function Dependency Link: 03
> VF offset: 109, stride: 1, Device ID: 37cd
> Supported Page Size: 00000553, System Page Size: 00000001
> Region 0: Memory at 00000000af000000 (64-bit, prefetchable)
> Region 3: Memory at 00000000b0020000 (64-bit, prefetchable)
> VF Migration: offset: 00000000, BIR: 0
> Capabilities: [1a0 v1] Transaction Processing Hints
> Device specific mode supported
> No steering table available
> Capabilities: [1b0 v1] Access Control Services
> ACSCap: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
> ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
> Kernel driver in use: i40e
> Kernel modules: i40e
>
>
> Same kernel+i40e, same SFP+ module - but on Intel X710, works like a treat:
>
> # lspci | grep X7
> 81:00.0 Ethernet controller: Intel Corporation Ethernet Controller X710 for 10GbE SFP+ (rev 01)
> 81:00.1 Ethernet controller: Intel Corporation Ethernet Controller X710 for 10GbE SFP+ (rev 01) # ethtool -m eth8
> Identifier : 0x03 (SFP)
> Extended identifier : 0x04 (GBIC/SFP defined by 2-wire interface ID)
> Connector : 0x07 (LC)
> Transceiver codes : 0x10 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00
> Transceiver type : 10G Ethernet: 10G Base-SR
> Transceiver type : Ethernet: 1000BASE-SX
> Encoding : 0x06 (64B/66B)
> BR, Nominal : 10300MBd
> (...)
> # ethtool -i eth8
> driver: i40e
> version: 2.9.21
> firmware-version: 6.01 0x800035cf 1.1876.0
> expansion-rom-version:
> bus-info: 0000:81:00.0
> supports-statistics: yes
> supports-test: yes
> supports-eeprom-access: yes
> supports-register-dump: yes
> supports-priv-flags: yes
> #
>
>
> Is this a known problem?
>
>
> Best regards,
> Jakub
>
>
>
> _______________________________________________
> E1000-devel mailing list
> E1000-devel@...ts.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/e1000-devel
> To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
Powered by blists - more mailing lists