netdev - Re: KSZ8863 ethernet PHY support question

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20190904154433.GC9068@lunn.ch>
Date:   Wed, 4 Sep 2019 17:44:33 +0200
From:   Andrew Lunn <andrew@...n.ch>
To:     HOLTZ Matthieu <matthieu.holtz@...ergroup.com>
Cc:     "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
        "matthieu.holtz@...il.com" <matthieu.holtz@...il.com>
Subject: Re: KSZ8863 ethernet PHY support question

On Tue, Sep 03, 2019 at 01:59:18PM +0000, HOLTZ Matthieu wrote:
> Hello,
> 
> I’d like to use a switch phy KSZ8863 with an NXP i.mx8mm MPU (new motherboard dev) and a kernel 4.14.x but I am a bit lost regarding the driver support.
> 
> Is the Phy supported by the driver under linux/drivers/net/phy/micrel.c and what about the switch configuration, is it implemented in the DSA subsystem ?

Hi Matthieu

There was a set of RFC patches for the switch posted a while ago:

https://www.spinics.net/lists/netdev/msg569654.html

You might want to talk to the author and help get them merged.

    Andrew