[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <b5065fcfaaf8bcb7bc532a8eb9f54949da838965.camel@analog.com>
Date: Mon, 16 Sep 2019 06:49:36 +0000
From: "Ardelean, Alexandru" <alexandru.Ardelean@...log.com>
To: "robh@...nel.org" <robh@...nel.org>
CC: "alexandre.torgue@...com" <alexandre.torgue@...com>,
"--cc=andrew@...n.ch" <--cc=andrew@...n.ch>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"peppe.cavallaro@...com" <peppe.cavallaro@...com>,
"davem@...emloft.net" <davem@...emloft.net>
Subject: Re: [PATCH 2/2] dt-bindings: net: dwmac: document 'mac-mode' property
On Fri, 2019-09-13 at 15:36 +0100, Rob Herring wrote:
> [External]
>
> On Fri, Sep 06, 2019 at 04:02:56PM +0300, Alexandru Ardelean wrote:
> > This change documents the 'mac-mode' property that was introduced in the
> > 'stmmac' driver to support passive mode converters that can sit in-between
> > the MAC & PHY.
> >
> > Signed-off-by: Alexandru Ardelean <alexandru.ardelean@...log.com>
> > ---
> > Documentation/devicetree/bindings/net/snps,dwmac.yaml | 8 ++++++++
> > 1 file changed, 8 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> > b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> > index c78be15704b9..ebe4537a7cce 100644
> > --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> > +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> > @@ -112,6 +112,14 @@ properties:
> > reset-names:
> > const: stmmaceth
> >
> > + mac-mode:
> > + maxItems: 1
>
> Is this an array because {min,max}Items is for arrays? It should be
> defined as a string with possible values.
>
> As this property is the same as another, you can do this:
>
> $ref: ethernet-controller.yaml#/properties/phy-connection-type
>
> Unless only a small subset of those values are valid here, then you may
> want to list them here.
>
Ack.
Thank you.
Will investigate and re-spin.
> > + description:
> > + The property is identical to 'phy-mode', and assumes that there is mode
> > + converter in-between the MAC & PHY (e.g. GMII-to-RGMII). This converter
> > + can be passive (no SW requirement), and requires that the MAC operate
> > + in a different mode than the PHY in order to function.
> > +
> > snps,axi-config:
> > $ref: /schemas/types.yaml#definitions/phandle
> > description:
> > --
> > 2.20.1
> >
Powered by blists - more mailing lists