| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20190920094431.13806-2-alexandru.ardelean@analog.com>
Date: Fri, 20 Sep 2019 12:44:31 +0300
From: Alexandru Ardelean <alexandru.ardelean@...log.com>
To: <netdev@...r.kernel.org>
CC: <linville@...driver.com>, <andrew@...n.ch>, <f.fainelli@...il.com>,
Alexandru Ardelean <alexandru.ardelean@...log.com>
Subject: [PATCH v2 2/2][ethtool] ethtool: implement support for Energy Detect Power Down
This change adds control for enabling/disabling Energy Detect Power Down
mode, as well as configuring wake-up intervals for TX pulses, via the new
ETHTOOL_PHY_EDPD control added in PHY tunable, in the kernel.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@...log.com>
---
Changelog v1 -> v2:
* reworked the parse_named_uint() function to avoid casting to types based
on Andrew's feedback
ethtool.8.in | 28 ++++++++++++++++
ethtool.c | 94 +++++++++++++++++++++++++++++++++++++++++++++++++---
2 files changed, 118 insertions(+), 4 deletions(-)
diff --git a/ethtool.8.in b/ethtool.8.in
index cd3be91..609a05a 100644
--- a/ethtool.8.in
+++ b/ethtool.8.in
@@ -362,11 +362,17 @@ ethtool \- query or control network driver and hardware settings
.A1 on off
.BN msecs
.RB ]
+.RB [
+.B energy\-detect\-power\-down
+.A1 on off
+.BN msecs
+.RB ]
.HP
.B ethtool \-\-get\-phy\-tunable
.I devname
.RB [ downshift ]
.RB [ fast-link-down ]
+.RB [ energy-detect-power-down ]
.HP
.B ethtool \-\-reset
.I devname
@@ -1100,6 +1106,24 @@ lB l.
Sets the period after which the link is reported as down. Note that the PHY may choose
the closest supported value. Only on reading back the tunable do you get the actual value.
.TE
+.TP
+.A2 energy-detect-power-down on off
+Specifies whether Energy Detect Power Down (EDPD) should be enabled (if supported).
+This will put the RX and TX circuit blocks into a low power mode, and the PHY will
+wake up periodically to send link pulses to avoid any lock-up situation with a peer
+PHY that may also have EDPD enabled. By default, this setting will also enable the
+periodic transmission of TX pulses.
+.TS
+nokeep;
+lB l.
+.BI msecs \ N
+ Some PHYs support configuration of the wake-up interval to send TX pulses.
+ This setting allows the control of this interval, and 0 disables TX pulses
+ if the PHY supports this. Disabling TX pulses can create a lock-up situation
+ where neither of the PHYs wakes the other one. If unspecified the default
+ value (in milliseconds) will be used by the PHY.
+.TE
+.TP
.PD
.RE
.TP
@@ -1122,6 +1146,10 @@ Some PHYs support a Fast Link Down Feature and may allow configuration of the de
before a broken link is reported as being down.
Gets the PHY Fast Link Down status / period.
+.TP
+.B energy\-detect\-power\-down
+Gets the current configured setting for Energy Detect Power Down (if supported).
+
.RE
.TP
.B \-\-reset
diff --git a/ethtool.c b/ethtool.c
index c0e2903..082e37f 100644
--- a/ethtool.c
+++ b/ethtool.c
@@ -4897,6 +4897,30 @@ static int do_get_phy_tunable(struct cmd_context *ctx)
else
fprintf(stdout, "Fast Link Down enabled, %d msecs\n",
cont.msecs);
+ } else if (!strcmp(argp[0], "energy-detect-power-down")) {
+ struct {
+ struct ethtool_tunable ds;
+ u16 msecs;
+ } cont;
+
+ cont.ds.cmd = ETHTOOL_PHY_GTUNABLE;
+ cont.ds.id = ETHTOOL_PHY_EDPD;
+ cont.ds.type_id = ETHTOOL_TUNABLE_U16;
+ cont.ds.len = 2;
+ if (send_ioctl(ctx, &cont.ds) < 0) {
+ perror("Cannot Get PHY Energy Detect Power Down value");
+ return 87;
+ }
+
+ if (cont.msecs == ETHTOOL_PHY_EDPD_DISABLE)
+ fprintf(stdout, "Energy Detect Power Down: disabled\n");
+ else if (cont.msecs == ETHTOOL_PHY_EDPD_NO_TX)
+ fprintf(stdout,
+ "Energy Detect Power Down: enabled, TX disabled\n");
+ else
+ fprintf(stdout,
+ "Energy Detect Power Down: enabled, TX %u msecs\n",
+ cont.msecs);
} else {
exit_bad_args();
}
@@ -5018,7 +5042,10 @@ static int parse_named_bool(struct cmd_context *ctx, const char *name, u8 *on)
return 1;
}
-static int parse_named_u8(struct cmd_context *ctx, const char *name, u8 *val)
+static int parse_named_uint(struct cmd_context *ctx,
+ const char *name,
+ unsigned long long *val,
+ unsigned long long max)
{
if (ctx->argc < 2)
return 0;
@@ -5026,7 +5053,7 @@ static int parse_named_u8(struct cmd_context *ctx, const char *name, u8 *val)
if (strcmp(*ctx->argp, name))
return 0;
- *val = get_uint_range(*(ctx->argp + 1), 0, 0xff);
+ *val = get_uint_range(*(ctx->argp + 1), 0, max);
ctx->argc -= 2;
ctx->argp += 2;
@@ -5034,6 +5061,30 @@ static int parse_named_u8(struct cmd_context *ctx, const char *name, u8 *val)
return 1;
}
+static int parse_named_u8(struct cmd_context *ctx, const char *name, u8 *val)
+{
+ unsigned long long val1;
+ int ret;
+
+ ret = parse_named_uint(ctx, name, &val1, 0xff);
+ if (ret)
+ *val = val1;
+
+ return ret;
+}
+
+static int parse_named_u16(struct cmd_context *ctx, const char *name, u16 *val)
+{
+ unsigned long long val1;
+ int ret;
+
+ ret = parse_named_uint(ctx, name, &val1, 0xffff);
+ if (ret)
+ *val = val1;
+
+ return ret;
+}
+
static int do_set_phy_tunable(struct cmd_context *ctx)
{
int err = 0;
@@ -5041,6 +5092,8 @@ static int do_set_phy_tunable(struct cmd_context *ctx)
u8 ds_changed = 0, ds_has_cnt = 0, ds_enable = 0;
u8 fld_changed = 0, fld_enable = 0;
u8 fld_msecs = ETHTOOL_PHY_FAST_LINK_DOWN_ON;
+ u8 edpd_changed = 0, edpd_enable = 0;
+ u16 edpd_tx_interval = ETHTOOL_PHY_EDPD_DFLT_TX_MSECS;
/* Parse arguments */
if (parse_named_bool(ctx, "downshift", &ds_enable)) {
@@ -5050,6 +5103,11 @@ static int do_set_phy_tunable(struct cmd_context *ctx)
fld_changed = 1;
if (fld_enable)
parse_named_u8(ctx, "msecs", &fld_msecs);
+ } else if (parse_named_bool(ctx, "energy-detect-power-down",
+ &edpd_enable)) {
+ edpd_changed = 1;
+ if (edpd_enable)
+ parse_named_u16(ctx, "msecs", &edpd_tx_interval);
} else {
exit_bad_args();
}
@@ -5074,6 +5132,16 @@ static int do_set_phy_tunable(struct cmd_context *ctx)
fld_msecs = ETHTOOL_PHY_FAST_LINK_DOWN_OFF;
else if (fld_msecs == ETHTOOL_PHY_FAST_LINK_DOWN_OFF)
exit_bad_args();
+ } else if (edpd_changed) {
+ if (!edpd_enable)
+ edpd_tx_interval = ETHTOOL_PHY_EDPD_DISABLE;
+ else if (edpd_tx_interval == 0)
+ edpd_tx_interval = ETHTOOL_PHY_EDPD_NO_TX;
+ else if (edpd_tx_interval > ETHTOOL_PHY_EDPD_NO_TX) {
+ fprintf(stderr, "'msecs' max value is %d.\n",
+ (ETHTOOL_PHY_EDPD_NO_TX - 1));
+ exit_bad_args();
+ }
}
/* Do it */
@@ -5109,6 +5177,22 @@ static int do_set_phy_tunable(struct cmd_context *ctx)
perror("Cannot Set PHY Fast Link Down value");
err = 87;
}
+ } else if (edpd_changed) {
+ struct {
+ struct ethtool_tunable fld;
+ u16 msecs;
+ } cont;
+
+ cont.fld.cmd = ETHTOOL_PHY_STUNABLE;
+ cont.fld.id = ETHTOOL_PHY_EDPD;
+ cont.fld.type_id = ETHTOOL_TUNABLE_U16;
+ cont.fld.len = 2;
+ cont.msecs = edpd_tx_interval;
+ err = send_ioctl(ctx, &cont.fld);
+ if (err < 0) {
+ perror("Cannot Set PHY Energy Detect Power Down");
+ err = 87;
+ }
}
return err;
@@ -5361,10 +5445,12 @@ static const struct option {
" [ tx-timer %d ]\n"},
{ "--set-phy-tunable", 1, do_set_phy_tunable, "Set PHY tunable",
" [ downshift on|off [count N] ]\n"
- " [ fast-link-down on|off [msecs N] ]\n"},
+ " [ fast-link-down on|off [msecs N] ]\n"
+ " [ energy-detect-power-down on|off [msecs N] ]\n"},
{ "--get-phy-tunable", 1, do_get_phy_tunable, "Get PHY tunable",
" [ downshift ]\n"
- " [ fast-link-down ]\n"},
+ " [ fast-link-down ]\n"
+ " [ energy-detect-power-down ]\n"},
{ "--reset", 1, do_reset, "Reset components",
" [ flags %x ]\n"
" [ mgmt ]\n"
--
2.20.1
Powered by blists - more mailing lists