netdev - [PATCH 3/3] net: ftgmac100: Ungate RCLK for RMII on ASPEED MACs

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20191008115143.14149-4-andrew@aj.id.au>
Date:   Tue,  8 Oct 2019 22:21:43 +1030
From:   Andrew Jeffery <andrew@...id.au>
To:     netdev@...r.kernel.org
Cc:     davem@...emloft.net, robh+dt@...nel.org, mark.rutland@....com,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        joel@....id.au, benh@...nel.crashing.org
Subject: [PATCH 3/3] net: ftgmac100: Ungate RCLK for RMII on ASPEED MACs

The 50MHz RCLK has to be enabled before the RMII interface will function.

Signed-off-by: Andrew Jeffery <andrew@...id.au>
---
 drivers/net/ethernet/faraday/ftgmac100.c | 35 +++++++++++++++++++-----
 1 file changed, 28 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index 9b7af94a40bb..9ff791fb0449 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -90,6 +90,9 @@ struct ftgmac100 {
 	struct mii_bus *mii_bus;
 	struct clk *clk;
 
+	/* 2600 RMII clock gate */
+	struct clk *rclk;
+
 	/* Link management */
 	int cur_speed;
 	int cur_duplex;
@@ -1718,12 +1721,14 @@ static void ftgmac100_ncsi_handler(struct ncsi_dev *nd)
 		   nd->link_up ? "up" : "down");
 }
 
-static void ftgmac100_setup_clk(struct ftgmac100 *priv)
+static int ftgmac100_setup_clk(struct ftgmac100 *priv)
 {
-	priv->clk = devm_clk_get(priv->dev, NULL);
-	if (IS_ERR(priv->clk))
-		return;
+	struct clk *clk;
 
+	clk = devm_clk_get(priv->dev, NULL /* MACCLK */);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+	priv->clk = clk;
 	clk_prepare_enable(priv->clk);
 
 	/* Aspeed specifies a 100MHz clock is required for up to
@@ -1732,6 +1737,14 @@ static void ftgmac100_setup_clk(struct ftgmac100 *priv)
 	 */
 	clk_set_rate(priv->clk, priv->use_ncsi ? FTGMAC_25MHZ :
 			FTGMAC_100MHZ);
+
+	/* RCLK is for RMII, typically used for NCSI. Optional because its not
+	 * necessary if it's the 2400 MAC or the MAC is configured for RGMII
+	 */
+	priv->rclk = devm_clk_get_optional(priv->dev, "RCLK");
+	clk_prepare_enable(priv->rclk);
+
+	return 0;
 }
 
 static int ftgmac100_probe(struct platform_device *pdev)
@@ -1853,8 +1866,11 @@ static int ftgmac100_probe(struct platform_device *pdev)
 			goto err_setup_mdio;
 	}
 
-	if (priv->is_aspeed)
-		ftgmac100_setup_clk(priv);
+	if (priv->is_aspeed) {
+		err = ftgmac100_setup_clk(priv);
+		if (err)
+			goto err_ncsi_dev;
+	}
 
 	/* Default ring sizes */
 	priv->rx_q_entries = priv->new_rx_q_entries = DEF_RX_QUEUE_ENTRIES;
@@ -1886,8 +1902,11 @@ static int ftgmac100_probe(struct platform_device *pdev)
 
 	return 0;
 
-err_ncsi_dev:
 err_register_netdev:
+	if (priv->rclk)
+		clk_disable_unprepare(priv->rclk);
+	clk_disable_unprepare(priv->clk);
+err_ncsi_dev:
 	ftgmac100_destroy_mdio(netdev);
 err_setup_mdio:
 	iounmap(priv->base);
@@ -1909,6 +1928,8 @@ static int ftgmac100_remove(struct platform_device *pdev)
 
 	unregister_netdev(netdev);
 
+	if (priv->rclk)
+		clk_disable_unprepare(priv->rclk);
 	clk_disable_unprepare(priv->clk);
 
 	/* There's a small chance the reset task will have been re-queued,
-- 
2.20.1