lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1da8fb9d3af8dcee1948903ae816438578365e51.1570455278.git.martinvarghesenokia@gmail.com>
Date:   Tue,  8 Oct 2019 15:19:40 +0530
From:   Martin Varghese <martinvarghesenokia@...il.com>
To:     netdev@...r.kernel.org, davem@...emloft.net, corbet@....net,
        scott.drennan@...ia.com, jbenc@...hat.com,
        martin.varghese@...ia.com
Cc:     Martin Varghese <martinvarghesenokia@...il.com>
Subject: [PATCH net-next 2/2] Special handling for IP & MPLS.

From: Martin <martin.varghese@...ia.com>

Signed-off-by: Martin Varghese <martinvarghesenokia@...il.com>

Signed-off-by: Martin Varghese <martinvarghesenokia@...il.com>
---
 Documentation/networking/bareudp.txt | 18 ++++++++
 drivers/net/bareudp.c                | 82 +++++++++++++++++++++++++++++++++---
 include/net/bareudp.h                |  1 +
 include/uapi/linux/if_link.h         |  1 +
 4 files changed, 95 insertions(+), 7 deletions(-)

diff --git a/Documentation/networking/bareudp.txt b/Documentation/networking/bareudp.txt
index d2530e2..4de1022 100644
--- a/Documentation/networking/bareudp.txt
+++ b/Documentation/networking/bareudp.txt
@@ -9,6 +9,15 @@ The Bareudp tunnel module provides a generic L3 encapsulation tunnelling
 support for tunnelling different L3 protocols like MPLS, IP, NSH etc. inside
 a UDP tunnel.
 
+Special Handling
+----------------
+The bareudp device supports special handling for MPLS & IP as they can have
+multiple ethertypes.
+MPLS procotcol can have ethertypes 0x8847 (unicast) & 0x8847 (multicast).
+IP proctocol can have ethertypes 0x0800 (v4) & 0x866 (v6).
+This special handling can be enabled only for ethertype 0x0800 & 0x88847 with a
+flag called extended mode.
+
 Usage
 ------
 
@@ -21,3 +30,12 @@ This creates a bareudp tunnel device which tunnels L3 traffic with ethertype
 The device will listen on UDP port 6635 to receive traffic.
 
 b. ip link delete bareudp0
+
+2. Device creation with extended mode enabled
+
+There are two ways to create a bareudp device for MPLS & IP with extended mode
+enabled
+
+a. ip link add dev  bareudp0 type bareudp dstport 6635 ethertype 0x8847 extmode 1
+
+b. ip link add dev  bareudp0 type bareudp dstport 6635 ethertype mpls
diff --git a/drivers/net/bareudp.c b/drivers/net/bareudp.c
index 7e6813a..2a688da 100644
--- a/drivers/net/bareudp.c
+++ b/drivers/net/bareudp.c
@@ -48,6 +48,7 @@ struct bareudp_dev {
 	struct net_device  *dev;        /* netdev for bareudp tunnel */
 	__be16		   ethertype;
 	u16	           sport_min;
+	bool               ext_mode;
 	struct bareudp_conf conf;
 	struct bareudp_sock __rcu *sock4; /* IPv4 socket for bareudp tunnel */
 #if IS_ENABLED(CONFIG_IPV6)
@@ -82,15 +83,64 @@ static int bareudp_udp_encap_recv(struct sock *sk, struct sk_buff *skb)
 		goto drop;
 
 	bareudp = bs->bareudp;
-	proto = bareudp->ethertype;
+	if (!bareudp)
+		goto drop;
+
+	if (bareudp->ethertype == htons(ETH_P_IP)) {
+		struct iphdr *iphdr;
+
+		iphdr = (struct iphdr *)(skb->data + BAREUDP_BASE_HLEN);
+		if (iphdr->version == 4) {
+			proto = bareudp->ethertype;
+		} else if (bareudp->ext_mode && (iphdr->version == 6)) {
+			proto = htons(ETH_P_IPV6);
+		} else {
+			bareudp->dev->stats.rx_dropped++;
+			goto drop;
+		}
+	} else if (bareudp->ethertype == htons(ETH_P_MPLS_UC)) {
+		struct iphdr *tunnel_hdr;
+
+		tunnel_hdr = (struct iphdr *)skb_network_header(skb);
+		if (tunnel_hdr->version == 4) {
+			if (!ipv4_is_multicast(tunnel_hdr->daddr)) {
+				proto = bareudp->ethertype;
+			} else if (bareudp->ext_mode &&
+				   ipv4_is_multicast(tunnel_hdr->daddr)) {
+				proto = htons(ETH_P_MPLS_MC);
+			} else {
+				bareudp->dev->stats.rx_dropped++;
+				goto drop;
+			}
+		} else {
+			int addr_type;
+			struct ipv6hdr *tunnel_hdr_v6;
+
+			tunnel_hdr_v6 = (struct ipv6hdr *)skb_network_header(skb);
+			addr_type =
+			ipv6_addr_type((struct in6_addr *)&tunnel_hdr_v6->daddr);
+			if (!(addr_type & IPV6_ADDR_MULTICAST)) {
+				proto = bareudp->ethertype;
+			} else if (bareudp->ext_mode &&
+				   (addr_type & IPV6_ADDR_MULTICAST)) {
+				proto = htons(ETH_P_MPLS_MC);
+			} else {
+				bareudp->dev->stats.rx_dropped++;
+				goto drop;
+			}
+		}
+	} else {
+		proto = bareudp->ethertype;
+	}
 
 	if (iptunnel_pull_header(skb, BAREUDP_BASE_HLEN,
-				 proto,
-				 !net_eq(bareudp->net,
-					 dev_net(bareudp->dev)))) {
+				proto,
+				!net_eq(bareudp->net,
+					dev_net(bareudp->dev)))) {
 		bareudp->dev->stats.rx_dropped++;
 		goto drop;
 	}
+
 	tun_dst = udp_tun_rx_dst(skb, bareudp_get_sk_family(bs), TUNNEL_KEY,
 				 0, 0);
 	if (!tun_dst) {
@@ -522,10 +572,13 @@ static netdev_tx_t bareudp_xmit(struct sk_buff *skb, struct net_device *dev)
 	int err;
 
 	if (skb->protocol != bareudp->ethertype) {
-		err = -EINVAL;
-		goto tx_error;
+		if (!bareudp->ext_mode ||
+		    (skb->protocol !=  htons(ETH_P_MPLS_MC) &&
+		     skb->protocol !=  htons(ETH_P_IPV6))) {
+			err = -EINVAL;
+			goto tx_error;
+		}
 	}
-
 	info = skb_tunnel_info(skb);
 	if (unlikely(!info || !(info->mode & IP_TUNNEL_INFO_TX))) {
 		err = -EINVAL;
@@ -630,6 +683,7 @@ static int bareudp_change_mtu(struct net_device *dev, int new_mtu)
 	[IFLA_BAREUDP_PORT]                = { .type = NLA_U16 },
 	[IFLA_BAREUDP_ETHERTYPE]	   = { .type = NLA_U16 },
 	[IFLA_BAREUDP_SRCPORT_MIN]         = { .type = NLA_U16 },
+	[IFLA_BAREUDP_EXTMODE]             = { .type = NLA_FLAG },
 };
 
 static int bareudp_validate(struct nlattr *tb[], struct nlattr *data[],
@@ -712,9 +766,15 @@ static int bareudp_configure(struct net *net, struct net_device *dev,
 	if (t)
 		return -EBUSY;
 
+	if (conf->ext_mode &&
+	    (conf->ethertype != htons(ETH_P_MPLS_UC) &&
+	     conf->ethertype != htons(ETH_P_IP)))
+		return -EINVAL;
+
 	bareudp->conf = *conf;
 	bareudp->ethertype = conf->ethertype;
 	bareudp->sport_min = conf->sport_min;
+	bareudp->ext_mode = conf->ext_mode;
 	err = register_netdevice(dev);
 	if (err)
 		return err;
@@ -737,6 +797,11 @@ static int bareudp2info(struct nlattr *data[], struct bareudp_conf *conf)
 	if (data[IFLA_BAREUDP_SRCPORT_MIN])
 		conf->sport_min =  nla_get_u16(data[IFLA_BAREUDP_SRCPORT_MIN]);
 
+	if (data[IFLA_BAREUDP_EXTMODE])
+		conf->ext_mode = true;
+	else
+		conf->ext_mode = false;
+
 	return 0;
 }
 
@@ -779,6 +844,7 @@ static size_t bareudp_get_size(const struct net_device *dev)
 	return  nla_total_size(sizeof(__be16)) +  /* IFLA_BAREUDP_PORT */
 		nla_total_size(sizeof(__be16)) +  /* IFLA_BAREUDP_ETHERTYPE */
 		nla_total_size(sizeof(__u16))  +  /* IFLA_BAREUDP_SRCPORT_MIN */
+		nla_total_size(0)              +  /* IFLA_BAREUDP_EXTMODE */
 		0;
 }
 
@@ -792,6 +858,8 @@ static int bareudp_fill_info(struct sk_buff *skb, const struct net_device *dev)
 		goto nla_put_failure;
 	if (nla_put_u16(skb, IFLA_BAREUDP_SRCPORT_MIN, bareudp->conf.sport_min))
 		goto nla_put_failure;
+	if (bareudp->ext_mode && nla_put_flag(skb, IFLA_BAREUDP_EXTMODE))
+		goto nla_put_failure;
 
 	return 0;
 
diff --git a/include/net/bareudp.h b/include/net/bareudp.h
index 513fae6..2c121d8 100644
--- a/include/net/bareudp.h
+++ b/include/net/bareudp.h
@@ -10,6 +10,7 @@ struct bareudp_conf {
 	__be16 ethertype;
 	__be16 port;
 	u16 sport_min;
+	bool ext_mode;
 };
 
 struct net_device *bareudp_dev_create(struct net *net, const char *name,
diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h
index 012f7e8..2b91c872 100644
--- a/include/uapi/linux/if_link.h
+++ b/include/uapi/linux/if_link.h
@@ -586,6 +586,7 @@ enum {
 	IFLA_BAREUDP_PORT,
 	IFLA_BAREUDP_ETHERTYPE,
 	IFLA_BAREUDP_SRCPORT_MIN,
+	IFLA_BAREUDP_EXTMODE,
 	__IFLA_BAREUDP_MAX
 };
 
-- 
1.8.3.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ