lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <aba8aee4c78523e652e0605db844b793214b7674.camel@suse.de>
Date:   Fri, 11 Oct 2019 21:01:45 +0200
From:   Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
To:     matthias.bgg@...nel.org, Florian Fainelli <f.fainelli@...il.com>,
        "David S . Miller" <davem@...emloft.net>
Cc:     linux-rpi-kernel@...ts.infradead.org,
        linux-arm-kernel@...ts.infradead.org,
        Stefan Wahren <wahrenst@....net>,
        Matthias Brugger <mbrugger@...e.com>,
        Doug Berger <opendmb@...il.com>,
        bcm-kernel-feedback-list@...adcom.com,
        linux-kernel@...r.kernel.org, netdev@...r.kernel.org
Subject: Re: [PATCH v1 2/3] net: bcmgenet: use optional max DMA burst size
 property

Hi Matthias!
One small comment, I'll test everything later on.

On Fri, 2019-10-11 at 20:48 +0200, matthias.bgg@...nel.org wrote:
> From: Matthias Brugger <mbrugger@...e.com>
> 
> Depending on the HW, the maximal usable DMA burst size can vary.
> If not set accordingly a timeout in the transmit queue happens and no
> package can be sent. Read to optional max-burst-sz property, if not
> present, fallback to the standard value.
> 
> Signed-off-by: Matthias Brugger <mbrugger@...e.com>
> ---
> 
>  drivers/net/ethernet/broadcom/genet/bcmgenet.c | 13 +++++++++++--
>  drivers/net/ethernet/broadcom/genet/bcmgenet.h |  1 +
>  2 files changed, 12 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
> b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
> index 12cb77ef1081..a7bb822a6d83 100644
> --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
> +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
> @@ -2576,7 +2576,8 @@ static int bcmgenet_init_dma(struct bcmgenet_priv *priv)
>  	}
>  
>  	/* Init rDma */
> -	bcmgenet_rdma_writel(priv, DMA_MAX_BURST_LENGTH, DMA_SCB_BURST_SIZE);
> +	bcmgenet_rdma_writel(priv, priv->dma_max_burst_length,
> +			     DMA_SCB_BURST_SIZE);
>  
>  	/* Initialize Rx queues */
>  	ret = bcmgenet_init_rx_queues(priv->dev);
> @@ -2589,7 +2590,8 @@ static int bcmgenet_init_dma(struct bcmgenet_priv *priv)
>  	}
>  
>  	/* Init tDma */
> -	bcmgenet_tdma_writel(priv, DMA_MAX_BURST_LENGTH, DMA_SCB_BURST_SIZE);
> +	bcmgenet_tdma_writel(priv, priv->dma_max_burst_length,
> +			     DMA_SCB_BURST_SIZE);
>  
>  	/* Initialize Tx queues */
>  	bcmgenet_init_tx_queues(priv->dev);
> @@ -3522,6 +3524,13 @@ static int bcmgenet_probe(struct platform_device *pdev)
>  
>  	clk_prepare_enable(priv->clk);
>  
> +	if (dn) {
> +		of_property_read_u32(dn, "dma-burst-sz",
> +				     &priv->dma_max_burst_length);

You set the 'dma-burst-sz' binding as optional, though this assumes that if a
device node is available dma_max_burst_length comes from the device tree. I
think you should check of_property_read_u32's return value and on failure
default to DMA_MAX_BURST_LENGTH.

> +	} else {
> +		priv->dma_max_burst_length = DMA_MAX_BURST_LENGTH;
> +	}
> +
>  	bcmgenet_set_hw_params(priv);
>  
>  	/* Mii wait queue */
> diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.h
> b/drivers/net/ethernet/broadcom/genet/bcmgenet.h
> index 4a8fc03d82fd..897f356eb376 100644
> --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.h
> +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.h
> @@ -663,6 +663,7 @@ struct bcmgenet_priv {
>  	bool crc_fwd_en;
>  
>  	unsigned int dma_rx_chk_bit;
> +	unsigned int dma_max_burst_length;
>  
>  	u32 msg_enable;
>  

Regards,
Nicolas


Download attachment "signature.asc" of type "application/pgp-signature" (489 bytes)

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ