netdev - Re: [PATCH 2/2] net: lpc_eth: parse phy nodes from device tree

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20191014234502.GG19861@lunn.ch>
Date:   Tue, 15 Oct 2019 01:45:02 +0200
From:   Andrew Lunn <andrew@...n.ch>
To:     Alexandre Belloni <alexandre.belloni@...tlin.com>
Cc:     "David S . Miller" <davem@...emloft.net>, netdev@...r.kernel.org,
        linux-kernel@...r.kernel.org, Vladimir Zapolskiy <vz@...ia.com>,
        Sylvain Lemieux <slemieux.tyco@...il.com>,
        linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH 2/2] net: lpc_eth: parse phy nodes from device tree

On Thu, Oct 10, 2019 at 10:45:30PM +0200, Alexandre Belloni wrote:
> When connected to a micrel phy, phy_find_first doesn't work properly
> because the first phy found is on address 0, the broadcast address but, the
> first thing the phy driver is doing is disabling this broadcast address.
> The phy is then available only on address 1 but the mdio driver doesn't
> know about it.
> 
> Instead, register the mdio bus using of_mdiobus_register and try to find
> the phy description in device tree before falling back to phy_find_first.
> 
> This ultimately also allows to describe the interrupt the phy is connected
> to.
> 
> Signed-off-by: Alexandre Belloni <alexandre.belloni@...tlin.com>

Hi Alexandre

>  
> -	if (mdiobus_register(pldat->mii_bus))
> +	if (of_mdiobus_register(pldat->mii_bus, pldat->pdev->dev.of_node))
>  		goto err_out_unregister_bus;

It is normal to use a container node 'mdio' in the ethernet node to
contain the PHY nodes. If you don't do this, you run into issues when
you have Ethernet switches on the MDIO bus.

    Andrew