[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAB4CAwcW5JGtZQy+=vugx5rRYMycWoCSSdDc6nwhunqTtqoQaA@mail.gmail.com>
Date: Mon, 21 Oct 2019 10:26:48 +0800
From: Chris Chiu <chiu@...lessm.com>
To: Jes Sorensen <Jes.Sorensen@...il.com>,
Kalle Valo <kvalo@...eaurora.org>,
David Miller <davem@...emloft.net>
Cc: linux-wireless <linux-wireless@...r.kernel.org>,
netdev <netdev@...r.kernel.org>,
Linux Kernel <linux-kernel@...r.kernel.org>,
Linux Upstreaming Team <linux@...lessm.com>
Subject: Re: [PATCH v2] rtl8xxxu: fix RTL8723BU connection failure issue after
warm reboot
On Thu, Oct 17, 2019 at 10:26 AM Chris Chiu <chiu@...lessm.com> wrote:
>
> On Wed, Oct 16, 2019 at 9:54 AM Chris Chiu <chiu@...lessm.com> wrote:
> >
> > The RTL8723BU has problems connecting to AP after each warm reboot.
> > Sometimes it returns no scan result, and in most cases, it fails
> > the authentication for unknown reason. However, it works totally
> > fine after cold reboot.
> >
> > Compare the value of register SYS_CR and SYS_CLK_MAC_CLK_ENABLE
> > for cold reboot and warm reboot, the registers imply that the MAC
> > is already powered and thus some procedures are skipped during
> > driver initialization. Double checked the vendor driver, it reads
> > the SYS_CR and SYS_CLK_MAC_CLK_ENABLE also but doesn't skip any
> > during initialization based on them. This commit only tells the
> > RTL8723BU to do full initialization without checking MAC status.
> >
> > Signed-off-by: Chris Chiu <chiu@...lessm.com>
> Signed-off-by: Jes Sorensen <Jes.Sorensen@...il.com>
>
> Sorry, I forgot to add Jes.
>
> Chris
> > ---
> >
> > Note:
> > v2: fix typo of commit message
> >
> >
Gentle ping. Cheers.
Chris
Powered by blists - more mailing lists