| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20191021000824.531-3-linus.walleij@linaro.org>
Date: Mon, 21 Oct 2019 02:08:16 +0200
From: Linus Walleij <linus.walleij@...aro.org>
To: netdev@...r.kernel.org, "David S . Miller" <davem@...emloft.net>
Cc: Arnd Bergmann <arnd@...db.de>,
Linus Walleij <linus.walleij@...aro.org>
Subject: [PATCH 02/10] wan: ixp4xx_hss: enable compile testing
From: Arnd Bergmann <arnd@...db.de>
The ixp4xx_hss driver needs the platform data definition and the
system clock rate to be compiled. Move both into a new platform_data
header file and enable compile testing.
Signed-off-by: Arnd Bergmann <arnd@...db.de>
Signed-off-by: Linus Walleij <linus.walleij@...aro.org>
---
arch/arm/mach-ixp4xx/goramo_mlr.c | 4 +++
arch/arm/mach-ixp4xx/include/mach/platform.h | 9 -----
drivers/net/wan/Kconfig | 3 +-
drivers/net/wan/ixp4xx_hss.c | 35 +++++++++++---------
include/linux/platform_data/wan_ixp4xx_hss.h | 17 ++++++++++
5 files changed, 43 insertions(+), 25 deletions(-)
create mode 100644 include/linux/platform_data/wan_ixp4xx_hss.h
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
index a0e0b6b7dc5c..93b7afeee142 100644
--- a/arch/arm/mach-ixp4xx/goramo_mlr.c
+++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
@@ -11,6 +11,7 @@
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/pci.h>
+#include <linux/platform_data/wan_ixp4xx_hss.h>
#include <linux/serial_8250.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -405,6 +406,9 @@ static void __init gmlr_init(void)
if (hw_bits & CFG_HW_HAS_HSS1)
device_tab[devices++] = &device_hss_tab[1]; /* max index 5 */
+ hss_plat[0].timer_freq = ixp4xx_timer_freq;
+ hss_plat[1].timer_freq = ixp4xx_timer_freq;
+
gpio_request(GPIO_SCL, "SCL/clock");
gpio_request(GPIO_SDA, "SDA/data");
gpio_request(GPIO_STR, "strobe");
diff --git a/arch/arm/mach-ixp4xx/include/mach/platform.h b/arch/arm/mach-ixp4xx/include/mach/platform.h
index 342acbe20f7c..04ef8025accc 100644
--- a/arch/arm/mach-ixp4xx/include/mach/platform.h
+++ b/arch/arm/mach-ixp4xx/include/mach/platform.h
@@ -104,15 +104,6 @@ struct eth_plat_info {
u8 hwaddr[6];
};
-/* Information about built-in HSS (synchronous serial) interfaces */
-struct hss_plat_info {
- int (*set_clock)(int port, unsigned int clock_type);
- int (*open)(int port, void *pdev,
- void (*set_carrier_cb)(void *pdev, int carrier));
- void (*close)(int port, void *pdev);
- u8 txreadyq;
-};
-
/*
* Frequency of clock used for primary clocksource
*/
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index dd1a147f2971..bf2fe1d602ea 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -315,7 +315,8 @@ config DSCC4_PCI_RST
config IXP4XX_HSS
tristate "Intel IXP4xx HSS (synchronous serial port) support"
- depends on HDLC && ARM && ARCH_IXP4XX && IXP4XX_NPE && IXP4XX_QMGR
+ depends on HDLC && IXP4XX_NPE && IXP4XX_QMGR
+ depends on ARCH_IXP4XX || COMPILE_TEST
help
Say Y here if you want to use built-in HSS ports
on IXP4xx processor.
diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c
index e7619cec978a..7c5cf77e9ef1 100644
--- a/drivers/net/wan/ixp4xx_hss.c
+++ b/drivers/net/wan/ixp4xx_hss.c
@@ -17,6 +17,7 @@
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
+#include <linux/platform_data/wan_ixp4xx_hss.h>
#include <linux/poll.h>
#include <linux/slab.h>
#include <linux/soc/ixp4xx/npe.h>
@@ -1182,14 +1183,14 @@ static int hss_hdlc_attach(struct net_device *dev, unsigned short encoding,
}
}
-static u32 check_clock(u32 rate, u32 a, u32 b, u32 c,
+static u32 check_clock(u32 timer_freq, u32 rate, u32 a, u32 b, u32 c,
u32 *best, u32 *best_diff, u32 *reg)
{
/* a is 10-bit, b is 10-bit, c is 12-bit */
u64 new_rate;
u32 new_diff;
- new_rate = ixp4xx_timer_freq * (u64)(c + 1);
+ new_rate = timer_freq * (u64)(c + 1);
do_div(new_rate, a * (c + 1) + b + 1);
new_diff = abs((u32)new_rate - rate);
@@ -1201,40 +1202,43 @@ static u32 check_clock(u32 rate, u32 a, u32 b, u32 c,
return new_diff;
}
-static void find_best_clock(u32 rate, u32 *best, u32 *reg)
+static void find_best_clock(u32 timer_freq, u32 rate, u32 *best, u32 *reg)
{
u32 a, b, diff = 0xFFFFFFFF;
- a = ixp4xx_timer_freq / rate;
+ a = timer_freq / rate;
if (a > 0x3FF) { /* 10-bit value - we can go as slow as ca. 65 kb/s */
- check_clock(rate, 0x3FF, 1, 1, best, &diff, reg);
+ check_clock(timer_freq, rate, 0x3FF, 1, 1, best, &diff, reg);
return;
}
if (a == 0) { /* > 66.666 MHz */
a = 1; /* minimum divider is 1 (a = 0, b = 1, c = 1) */
- rate = ixp4xx_timer_freq;
+ rate = timer_freq;
}
- if (rate * a == ixp4xx_timer_freq) { /* don't divide by 0 later */
- check_clock(rate, a - 1, 1, 1, best, &diff, reg);
+ if (rate * a == timer_freq) { /* don't divide by 0 later */
+ check_clock(timer_freq, rate, a - 1, 1, 1, best, &diff, reg);
return;
}
for (b = 0; b < 0x400; b++) {
u64 c = (b + 1) * (u64)rate;
- do_div(c, ixp4xx_timer_freq - rate * a);
+ do_div(c, timer_freq - rate * a);
c--;
if (c >= 0xFFF) { /* 12-bit - no need to check more 'b's */
if (b == 0 && /* also try a bit higher rate */
- !check_clock(rate, a - 1, 1, 1, best, &diff, reg))
+ !check_clock(timer_freq, rate, a - 1, 1, 1, best,
+ &diff, reg))
return;
- check_clock(rate, a, b, 0xFFF, best, &diff, reg);
+ check_clock(timer_freq, rate, a, b, 0xFFF, best,
+ &diff, reg);
return;
}
- if (!check_clock(rate, a, b, c, best, &diff, reg))
+ if (!check_clock(timer_freq, rate, a, b, c, best, &diff, reg))
return;
- if (!check_clock(rate, a, b, c + 1, best, &diff, reg))
+ if (!check_clock(timer_freq, rate, a, b, c + 1, best, &diff,
+ reg))
return;
}
}
@@ -1285,8 +1289,9 @@ static int hss_hdlc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
port->clock_type = clk; /* Update settings */
if (clk == CLOCK_INT)
- find_best_clock(new_line.clock_rate, &port->clock_rate,
- &port->clock_reg);
+ find_best_clock(port->plat->timer_freq,
+ new_line.clock_rate,
+ &port->clock_rate, &port->clock_reg);
else {
port->clock_rate = 0;
port->clock_reg = CLK42X_SPEED_2048KHZ;
diff --git a/include/linux/platform_data/wan_ixp4xx_hss.h b/include/linux/platform_data/wan_ixp4xx_hss.h
new file mode 100644
index 000000000000..d525a0feb9e1
--- /dev/null
+++ b/include/linux/platform_data/wan_ixp4xx_hss.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __PLATFORM_DATA_WAN_IXP4XX_HSS_H
+#define __PLATFORM_DATA_WAN_IXP4XX_HSS_H
+
+#include <linux/types.h>
+
+/* Information about built-in HSS (synchronous serial) interfaces */
+struct hss_plat_info {
+ int (*set_clock)(int port, unsigned int clock_type);
+ int (*open)(int port, void *pdev,
+ void (*set_carrier_cb)(void *pdev, int carrier));
+ void (*close)(int port, void *pdev);
+ u8 txreadyq;
+ u32 timer_freq;
+};
+
+#endif
--
2.21.0
Powered by blists - more mailing lists