Message-ID: <5a7bc5da-d501-2750-90bf-545dd55f85fa@redhat.com>
Date:   Wed, 23 Oct 2019 18:29:21 +0800
From:   Jason Wang <jasowang@...hat.com>
To:     Tiwei Bie <tiwei.bie@...el.com>
Cc:     mst@...hat.com, alex.williamson@...hat.com,
        maxime.coquelin@...hat.com, linux-kernel@...r.kernel.org,
        kvm@...r.kernel.org, virtualization@...ts.linux-foundation.org,
        netdev@...r.kernel.org, dan.daly@...el.com,
        cunming.liang@...el.com, zhihong.wang@...el.com,
        lingshan.zhu@...el.com
Subject: Re: [PATCH v2] vhost: introduce mdev based hardware backend


On 2019/10/23 下午6:11, Tiwei Bie wrote:
> On Wed, Oct 23, 2019 at 03:25:00PM +0800, Jason Wang wrote:
>> On 2019/10/23 下午3:07, Tiwei Bie wrote:
>>> On Wed, Oct 23, 2019 at 01:46:23PM +0800, Jason Wang wrote:
>>>> On 2019/10/23 上午11:02, Tiwei Bie wrote:
>>>>> On Tue, Oct 22, 2019 at 09:30:16PM +0800, Jason Wang wrote:
>>>>>> On 2019/10/22 下午5:52, Tiwei Bie wrote:
>>>>>>> This patch introduces a mdev based hardware vhost backend.
>>>>>>> This backend is built on top of the same abstraction used
>>>>>>> in virtio-mdev and provides a generic vhost interface for
>>>>>>> userspace to accelerate the virtio devices in guest.
>>>>>>>
>>>>>>> This backend is implemented as a mdev device driver on top
>>>>>>> of the same mdev device ops used in virtio-mdev but using
>>>>>>> a different mdev class id, and it will register the device
>>>>>>> as a VFIO device for userspace to use. Userspace can setup
>>>>>>> the IOMMU with the existing VFIO container/group APIs and
>>>>>>> then get the device fd with the device name. After getting
>>>>>>> the device fd of this device, userspace can use vhost ioctls
>>>>>>> to setup the backend.
>>>>>>>
>>>>>>> Signed-off-by: Tiwei Bie <tiwei.bie@...el.com>
>>>>>>> ---
>>>>>>> This patch depends on below series:
>>>>>>> https://lkml.org/lkml/2019/10/17/286
>>>>>>>
>>>>>>> v1 -> v2:
>>>>>>> - Replace _SET_STATE with _SET_STATUS (MST);
>>>>>>> - Check status bits at each step (MST);
>>>>>>> - Report the max ring size and max number of queues (MST);
>>>>>>> - Add missing MODULE_DEVICE_TABLE (Jason);
>>>>>>> - Only support the network backend w/o multiqueue for now;
>>>>>> Any idea on how to extend it to support devices other than net? I think we
>>>>>> want a generic API or an API that could be made generic in the future.
>>>>>>
>>>>>> Do we want to e.g having a generic vhost mdev for all kinds of devices or
>>>>>> introducing e.g vhost-net-mdev and vhost-scsi-mdev?
>>>>> One possible way is to do what vhost-user does. I.e. Apart from
>>>>> the generic ring, features, ... related ioctls, we also introduce
>>>>> device specific ioctls when we need them. As vhost-mdev just needs
>>>>> to forward configs between parent and userspace and even won't
>>>>> cache any info when possible,
>>>> So it looks to me this is only possible if we expose e.g set_config and
>>>> get_config to userspace.
>>> The set_config and get_config interface isn't really everything
>>> of device specific settings. We also have ctrlq in virtio-net.
>>
>> Yes, but it could be processed by the exist API. Isn't it? Just set ctrl vq
>> address and let parent to deal with that.
> I mean how to expose ctrlq related settings to userspace?


I think it works like:

1) userspace find ctrl_vq is supported

2) then it can allocate memory for ctrl vq and set its address through 
vhost-mdev

3) userspace can populate ctrl vq itself


>
>>
>>>>> I think it might be better to do
>>>>> this in one generic vhost-mdev module.
>>>> Looking at definitions of VhostUserRequest in qemu, it mixed generic API
>>>> with device specific API. If we want go this ways (a generic vhost-mdev),
>>>> more questions needs to be answered:
>>>>
>>>> 1) How could userspace know which type of vhost it would use? Do we need to
>>>> expose virtio subsystem device in for userspace this case?
>>>>
>>>> 2) That generic vhost-mdev module still need to filter out unsupported
>>>> ioctls for a specific type. E.g if it probes a net device, it should refuse
>>>> API for other type. This in fact a vhost-mdev-net but just not modularize it
>>>> on top of vhost-mdev.
>>>>
>>>>
>>>>>>> - Some minor fixes and improvements;
>>>>>>> - Rebase on top of virtio-mdev series v4;
>>> [...]
>>>>>>> +
>>>>>>> +static long vhost_mdev_get_features(struct vhost_mdev *m, u64 __user *featurep)
>>>>>>> +{
>>>>>>> +	if (copy_to_user(featurep, &m->features, sizeof(m->features)))
>>>>>>> +		return -EFAULT;
>>>>>> As discussed in previous version do we need to filter out MQ feature here?
>>>>> I think it's more straightforward to let the parent drivers to
>>>>> filter out the unsupported features. Otherwise it would be tricky
>>>>> when we want to add more features in vhost-mdev module,
>>>> It's as simple as remove the feature from blacklist?
>>> It's not really that easy. It may break the old drivers.
>>
>> I'm not sure I understand here, we do feature negotiation anyhow. For old
>> drivers do you mean the guest drivers without MQ?
> For old drivers I mean old parent drivers. It's possible
> to compile old drivers on new kernels.


Yes, but if old parent driver itself can not support MQ it should just 
not advertise that feature.


>
> I'm not quite sure how will we implement MQ support in
> vhost-mdev.


Yes, that's why I ask here. I think we want the vhost-mdev to be generic 
which means it's better not let vhost-mdev to know anything which is 
device specific. So this is a question that should be considered.


> If we need to introduce new virtio_mdev_device_ops
> callbacks and an old driver exposed the MQ feature,
> then the new vhost-mdev will see this old driver expose
> MQ feature but not provide corresponding callbacks.ean


That's exact the issue which current API can not handle, so that's why I 
suggest to filter MQ out for vhost-mdev.

And in the future, we can:

1) invent new ioctls and convert them to config access or

2) just exposing config for userspace to access (then vhost-mdev work 
much more similar to virtio-mdev).


>
>>
>>>>> i.e. if
>>>>> the parent drivers may expose unsupported features and relay on
>>>>> vhost-mdev to filter them out, these features will be exposed
>>>>> to userspace automatically when they are enabled in vhost-mdev
>>>>> in the future.
>>>> The issue is, it's only that vhost-mdev knows its own limitation. E.g in
>>>> this patch, vhost-mdev only implements a subset of transport API, but parent
>>>> doesn't know about that.
>>>>
>>>> Still MQ as an example, there's no way (or no need) for parent to know that
>>>> vhost-mdev does not support MQ.
>>> The mdev is a MDEV_CLASS_ID_VHOST mdev device. When the parent
>>> is being developed, it should know the currently supported features
>>> of vhost-mdev.
>>
>> How can parent know MQ is not supported by vhost-mdev?
> Good point. I agree vhost-mdev should filter out the unsupported
> features. But in the meantime, I think drivers also shouldn't
> expose unsupported features.


Exactly. But there's a case in the middle, e.g parent drivers support MQ 
and virtio-mdev can do that but not vhost-mdev.


>
>>
>>>> And this allows old kenrel to work with new
>>>> parent drivers.
>>> The new drivers should provide things like VIRTIO_MDEV_F_VERSION_1
>>> to be compatible with the old kernels. When VIRTIO_MDEV_F_VERSION_1
>>> is provided/negotiated, the behaviours should be consistent.
>>
>> To be clear, I didn't mean a change in virtio-mdev API, I meant:
>>
>> 1) old vhost-mdev kernel driver that filters out MQ
>>
>> 2) new parent driver that support MQ
>>
>>
>>>> So basically we have three choices here:
>>>>
>>>> 1) Implement what vhost-user did and implement a generic vhost-mdev (but may
>>>> still have lots of device specific code). To support advanced feature which
>>>> requires the access to config, still lots of API that needs to be added.
>>>>
>>>> 2) Implement what vhost-kernel did, have a generic vhost-mdev driver and a
>>>> vhost bus on top for match a device specific API e.g vhost-mdev-net. We
>>>> still have device specific API but limit them only to device specific
>>>> module. Still require new ioctls for advanced feature like MQ.
>>>>
>>>> 3) Simply expose all virtio-mdev transport to userspace.
>>> Currently, virtio-mdev transport is a set of function callbacks
>>> defined in kernel. How to simply expose virtio-mdev transport to
>>> userspace?
>>
>> The most straightforward way is to have an 1:1 mapping between ioctl and
>> virito_mdev_device_ops.
> Seems we are already trying to do 1:1 mapping between ioctl
> and virtio_mdev_device_ops in vhost-mdev now (the major piece
> missing is get_device_id/get_config/set_config).


Yes, with this we can have a device independent API. Do you think this 
is better?

Thanks


>
>
>> Thanks
>>
>>
>>>
>>>> A generic module
>>>> without any type specific code (like virtio-mdev). No need dedicated API for
>>>> e.g MQ. But then the API will look much different than current vhost did.
>>>>
>>>> Consider the limitation of 1) I tend to choose 2 or 3. What's you opinion?
>>>>
>>>>

Powered by blists - more mailing lists