[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20191024212915.4201-1-chris.packham@alliedtelesis.co.nz>
Date: Fri, 25 Oct 2019 10:29:15 +1300
From: Chris Packham <chris.packham@...iedtelesis.co.nz>
To: johannes@...solutions.net, davem@...emloft.net
Cc: linux-wireless@...r.kernel.org, netdev@...r.kernel.org,
trivial@...nel.org,
Chris Packham <chris.packham@...iedtelesis.co.nz>,
linux-kernel@...r.kernel.org
Subject: [PATCH] mac80211: typo fixes in kerneldoc comments
Correct some trivial typos in kerneldoc comments.
Signed-off-by: Chris Packham <chris.packham@...iedtelesis.co.nz>
---
include/net/mac80211.h | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 523c6a09e1c8..93d774e0d082 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -312,7 +312,7 @@ struct ieee80211_vif_chanctx_switch {
* @BSS_CHANGED_KEEP_ALIVE: keep alive options (idle period or protected
* keep alive) changed.
* @BSS_CHANGED_MCAST_RATE: Multicast Rate setting changed for this interface
- * @BSS_CHANGED_FTM_RESPONDER: fime timing reasurement request responder
+ * @BSS_CHANGED_FTM_RESPONDER: fine timing reasurement request responder
* functionality changed for this BSS (AP mode).
* @BSS_CHANGED_TWT: TWT status changed
* @BSS_CHANGED_HE_OBSS_PD: OBSS Packet Detection status changed.
@@ -1059,7 +1059,7 @@ struct ieee80211_tx_info {
};
/**
- * struct ieee80211_tx_status - extended tx staus info for rate control
+ * struct ieee80211_tx_status - extended tx status info for rate control
*
* @sta: Station that the packet was transmitted for
* @info: Basic tx status information
@@ -1702,7 +1702,7 @@ struct wireless_dev *ieee80211_vif_to_wdev(struct ieee80211_vif *vif);
* %IEEE80211_KEY_FLAG_SW_MGMT_TX flag to encrypt such frames in SW.
* @IEEE80211_KEY_FLAG_GENERATE_IV_MGMT: This flag should be set by the
* driver for a CCMP/GCMP key to indicate that is requires IV generation
- * only for managment frames (MFP).
+ * only for management frames (MFP).
* @IEEE80211_KEY_FLAG_RESERVE_TAILROOM: This flag should be set by the
* driver for a key to indicate that sufficient tailroom must always
* be reserved for ICV or MIC, even when HW encryption is enabled.
@@ -1998,7 +1998,7 @@ struct ieee80211_sta {
*
* * If the skb is transmitted as part of a BA agreement, the
* A-MSDU maximal size is min(max_amsdu_len, 4065) bytes.
- * * If the skb is not part of a BA aggreement, the A-MSDU maximal
+ * * If the skb is not part of a BA agreement, the A-MSDU maximal
* size is min(max_amsdu_len, 7935) bytes.
*
* Both additional HT limits must be enforced by the low level
@@ -3183,13 +3183,13 @@ enum ieee80211_rate_control_changed {
*
* With the support for multi channel contexts and multi channel operations,
* remain on channel operations might be limited/deferred/aborted by other
- * flows/operations which have higher priority (and vise versa).
+ * flows/operations which have higher priority (and vice versa).
* Specifying the ROC type can be used by devices to prioritize the ROC
* operations compared to other operations/flows.
*
* @IEEE80211_ROC_TYPE_NORMAL: There are no special requirements for this ROC.
* @IEEE80211_ROC_TYPE_MGMT_TX: The remain on channel request is required
- * for sending managment frames offchannel.
+ * for sending management frames offchannel.
*/
enum ieee80211_roc_type {
IEEE80211_ROC_TYPE_NORMAL = 0,
@@ -5609,7 +5609,7 @@ void ieee80211_iter_keys_rcu(struct ieee80211_hw *hw,
/**
* ieee80211_iter_chan_contexts_atomic - iterate channel contexts
- * @hw: pointre obtained from ieee80211_alloc_hw().
+ * @hw: pointer obtained from ieee80211_alloc_hw().
* @iter: iterator function
* @iter_data: data passed to iterator function
*
@@ -6357,7 +6357,7 @@ ieee80211_return_txq(struct ieee80211_hw *hw, struct ieee80211_txq *txq,
* again.
*
* The API ieee80211_txq_may_transmit() also ensures that TXQ list will be
- * aligned aginst driver's own round-robin scheduler list. i.e it rotates
+ * aligned against driver's own round-robin scheduler list. i.e it rotates
* the TXQ list till it makes the requested node becomes the first entry
* in TXQ list. Thus both the TXQ list and driver's list are in sync. If this
* function returns %true, the driver is expected to schedule packets
--
2.23.0
Powered by blists - more mailing lists