netdev - [PATCH v2] mac80211: typo fixes in kerneldoc comments

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Message-Id: <20191024213647.5507-1-chris.packham@alliedtelesis.co.nz>
Date:   Fri, 25 Oct 2019 10:36:47 +1300
From:   Chris Packham <chris.packham@...iedtelesis.co.nz>
To:     johannes@...solutions.net, davem@...emloft.net
Cc:     linux-wireless@...r.kernel.org, netdev@...r.kernel.org,
        trivial@...nel.org,
        Chris Packham <chris.packham@...iedtelesis.co.nz>,
        linux-kernel@...r.kernel.org
Subject: [PATCH v2] mac80211: typo fixes in kerneldoc comments

Correct some trivial typos in kerneldoc comments.

Signed-off-by: Chris Packham <chris.packham@...iedtelesis.co.nz>
---

Notes:
    Changes in v2:
    - one more reasurement -> measurement

 include/net/mac80211.h | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 523c6a09e1c8..46f28c6620b9 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -312,7 +312,7 @@ struct ieee80211_vif_chanctx_switch {
  * @BSS_CHANGED_KEEP_ALIVE: keep alive options (idle period or protected
  *	keep alive) changed.
  * @BSS_CHANGED_MCAST_RATE: Multicast Rate setting changed for this interface
- * @BSS_CHANGED_FTM_RESPONDER: fime timing reasurement request responder
+ * @BSS_CHANGED_FTM_RESPONDER: fine timing measurement request responder
  *	functionality changed for this BSS (AP mode).
  * @BSS_CHANGED_TWT: TWT status changed
  * @BSS_CHANGED_HE_OBSS_PD: OBSS Packet Detection status changed.
@@ -1059,7 +1059,7 @@ struct ieee80211_tx_info {
 };
 
 /**
- * struct ieee80211_tx_status - extended tx staus info for rate control
+ * struct ieee80211_tx_status - extended tx status info for rate control
  *
  * @sta: Station that the packet was transmitted for
  * @info: Basic tx status information
@@ -1702,7 +1702,7 @@ struct wireless_dev *ieee80211_vif_to_wdev(struct ieee80211_vif *vif);
  *	%IEEE80211_KEY_FLAG_SW_MGMT_TX flag to encrypt such frames in SW.
  * @IEEE80211_KEY_FLAG_GENERATE_IV_MGMT: This flag should be set by the
  *	driver for a CCMP/GCMP key to indicate that is requires IV generation
- *	only for managment frames (MFP).
+ *	only for management frames (MFP).
  * @IEEE80211_KEY_FLAG_RESERVE_TAILROOM: This flag should be set by the
  *	driver for a key to indicate that sufficient tailroom must always
  *	be reserved for ICV or MIC, even when HW encryption is enabled.
@@ -1998,7 +1998,7 @@ struct ieee80211_sta {
 	 *
 	 * * If the skb is transmitted as part of a BA agreement, the
 	 *   A-MSDU maximal size is min(max_amsdu_len, 4065) bytes.
-	 * * If the skb is not part of a BA aggreement, the A-MSDU maximal
+	 * * If the skb is not part of a BA agreement, the A-MSDU maximal
 	 *   size is min(max_amsdu_len, 7935) bytes.
 	 *
 	 * Both additional HT limits must be enforced by the low level
@@ -3183,13 +3183,13 @@ enum ieee80211_rate_control_changed {
  *
  * With the support for multi channel contexts and multi channel operations,
  * remain on channel operations might be limited/deferred/aborted by other
- * flows/operations which have higher priority (and vise versa).
+ * flows/operations which have higher priority (and vice versa).
  * Specifying the ROC type can be used by devices to prioritize the ROC
  * operations compared to other operations/flows.
  *
  * @IEEE80211_ROC_TYPE_NORMAL: There are no special requirements for this ROC.
  * @IEEE80211_ROC_TYPE_MGMT_TX: The remain on channel request is required
- *	for sending managment frames offchannel.
+ *	for sending management frames offchannel.
  */
 enum ieee80211_roc_type {
 	IEEE80211_ROC_TYPE_NORMAL = 0,
@@ -5609,7 +5609,7 @@ void ieee80211_iter_keys_rcu(struct ieee80211_hw *hw,
 
 /**
  * ieee80211_iter_chan_contexts_atomic - iterate channel contexts
- * @hw: pointre obtained from ieee80211_alloc_hw().
+ * @hw: pointer obtained from ieee80211_alloc_hw().
  * @iter: iterator function
  * @iter_data: data passed to iterator function
  *
@@ -6357,7 +6357,7 @@ ieee80211_return_txq(struct ieee80211_hw *hw, struct ieee80211_txq *txq,
  * again.
  *
  * The API ieee80211_txq_may_transmit() also ensures that TXQ list will be
- * aligned aginst driver's own round-robin scheduler list. i.e it rotates
+ * aligned against driver's own round-robin scheduler list. i.e it rotates
  * the TXQ list till it makes the requested node becomes the first entry
  * in TXQ list. Thus both the TXQ list and driver's list are in sync. If this
  * function returns %true, the driver is expected to schedule packets
-- 
2.23.0