| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <BC2F1623-D8A5-4A6E-BAF4-5C551637E472@flugsvamp.com>
Date: Fri, 25 Oct 2019 09:12:15 -0700
From: "Jonathan Lemon" <jlemon@...gsvamp.com>
To: "Laurentiu Tudor" <laurentiu.tudor@....com>
Cc: hch@....de, joro@...tes.org,
"Ioana Ciocoi Radulescu" <ruxandra.radulescu@....com>,
linux-kernel@...r.kernel.org, iommu@...ts.linux-foundation.org,
netdev@...r.kernel.org, "Ioana Ciornei" <ioana.ciornei@....com>,
"Leo Li" <leoyang.li@....com>, robin.murphy@....com,
"Diana Madalina Craciun" <diana.craciun@....com>,
davem@...emloft.net, "Madalin Bucur" <madalin.bucur@....com>
Subject: Re: [PATCH v2 3/3] dpaa2_eth: use new unmap and sync dma api variants
On 24 Oct 2019, at 5:41, Laurentiu Tudor wrote:
> From: Laurentiu Tudor <laurentiu.tudor@....com>
>
> Convert this driver to usage of the newly introduced dma unmap and
> sync DMA APIs. This will get rid of the unsupported direct usage of
> iommu_iova_to_phys() API.
>
> Signed-off-by: Laurentiu Tudor <laurentiu.tudor@....com>
> ---
> .../net/ethernet/freescale/dpaa2/dpaa2-eth.c | 40
> +++++++------------
> .../net/ethernet/freescale/dpaa2/dpaa2-eth.h | 1 -
> 2 files changed, 15 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
> b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
> index 19379bae0144..8c3391e6e598 100644
> --- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
> +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
> @@ -29,16 +29,6 @@ MODULE_LICENSE("Dual BSD/GPL");
> MODULE_AUTHOR("Freescale Semiconductor, Inc");
> MODULE_DESCRIPTION("Freescale DPAA2 Ethernet Driver");
>
> -static void *dpaa2_iova_to_virt(struct iommu_domain *domain,
> - dma_addr_t iova_addr)
> -{
> - phys_addr_t phys_addr;
> -
> - phys_addr = domain ? iommu_iova_to_phys(domain, iova_addr) :
> iova_addr;
> -
> - return phys_to_virt(phys_addr);
> -}
> -
> static void validate_rx_csum(struct dpaa2_eth_priv *priv,
> u32 fd_status,
> struct sk_buff *skb)
> @@ -85,9 +75,10 @@ static void free_rx_fd(struct dpaa2_eth_priv *priv,
> sgt = vaddr + dpaa2_fd_get_offset(fd);
> for (i = 1; i < DPAA2_ETH_MAX_SG_ENTRIES; i++) {
> addr = dpaa2_sg_get_addr(&sgt[i]);
> - sg_vaddr = dpaa2_iova_to_virt(priv->iommu_domain, addr);
> - dma_unmap_page(dev, addr, DPAA2_ETH_RX_BUF_SIZE,
> - DMA_BIDIRECTIONAL);
> + sg_vaddr = page_to_virt
> + (dma_unmap_page_desc(dev, addr,
> + DPAA2_ETH_RX_BUF_SIZE,
> + DMA_BIDIRECTIONAL));
This is doing virt -> page -> virt. Why not just have the new
function return the VA corresponding to the addr, which would
match the other functions?
--
Jonathan
>
> free_pages((unsigned long)sg_vaddr, 0);
> if (dpaa2_sg_is_final(&sgt[i]))
> @@ -143,9 +134,10 @@ static struct sk_buff *build_frag_skb(struct
> dpaa2_eth_priv *priv,
>
> /* Get the address and length from the S/G entry */
> sg_addr = dpaa2_sg_get_addr(sge);
> - sg_vaddr = dpaa2_iova_to_virt(priv->iommu_domain, sg_addr);
> - dma_unmap_page(dev, sg_addr, DPAA2_ETH_RX_BUF_SIZE,
> - DMA_BIDIRECTIONAL);
> + sg_vaddr = page_to_virt
> + (dma_unmap_page_desc(dev, sg_addr,
> + DPAA2_ETH_RX_BUF_SIZE,
> + DMA_BIDIRECTIONAL));
>
> sg_length = dpaa2_sg_get_len(sge);
>
> @@ -210,9 +202,9 @@ static void free_bufs(struct dpaa2_eth_priv *priv,
> u64 *buf_array, int count)
> int i;
>
> for (i = 0; i < count; i++) {
> - vaddr = dpaa2_iova_to_virt(priv->iommu_domain, buf_array[i]);
> - dma_unmap_page(dev, buf_array[i], DPAA2_ETH_RX_BUF_SIZE,
> - DMA_BIDIRECTIONAL);
> + vaddr = page_to_virt(dma_unmap_page_desc(dev, buf_array[i],
> + DPAA2_ETH_RX_BUF_SIZE,
> + DMA_BIDIRECTIONAL));
> free_pages((unsigned long)vaddr, 0);
> }
> }
> @@ -369,9 +361,8 @@ static void dpaa2_eth_rx(struct dpaa2_eth_priv
> *priv,
> /* Tracing point */
> trace_dpaa2_rx_fd(priv->net_dev, fd);
>
> - vaddr = dpaa2_iova_to_virt(priv->iommu_domain, addr);
> - dma_sync_single_for_cpu(dev, addr, DPAA2_ETH_RX_BUF_SIZE,
> - DMA_BIDIRECTIONAL);
> + vaddr = dma_sync_single_for_cpu_desc(dev, addr,
> DPAA2_ETH_RX_BUF_SIZE,
> + DMA_BIDIRECTIONAL);
>
> fas = dpaa2_get_fas(vaddr, false);
> prefetch(fas);
> @@ -682,7 +673,8 @@ static void free_tx_fd(const struct dpaa2_eth_priv
> *priv,
> u32 fd_len = dpaa2_fd_get_len(fd);
>
> fd_addr = dpaa2_fd_get_addr(fd);
> - buffer_start = dpaa2_iova_to_virt(priv->iommu_domain, fd_addr);
> + buffer_start = dma_sync_single_for_cpu_desc(dev, fd_addr,
> sizeof(*swa),
> + DMA_BIDIRECTIONAL);
> swa = (struct dpaa2_eth_swa *)buffer_start;
>
> if (fd_format == dpaa2_fd_single) {
> @@ -3448,8 +3440,6 @@ static int dpaa2_eth_probe(struct fsl_mc_device
> *dpni_dev)
> priv = netdev_priv(net_dev);
> priv->net_dev = net_dev;
>
> - priv->iommu_domain = iommu_get_domain_for_dev(dev);
> -
> /* Obtain a MC portal */
> err = fsl_mc_portal_allocate(dpni_dev,
> FSL_MC_IO_ATOMIC_CONTEXT_PORTAL,
> &priv->mc_io);
> diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
> b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
> index 8a0e65b3267f..4e5183617ebd 100644
> --- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
> +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
> @@ -374,7 +374,6 @@ struct dpaa2_eth_priv {
>
> struct fsl_mc_device *dpbp_dev;
> u16 bpid;
> - struct iommu_domain *iommu_domain;
>
> bool tx_tstamp; /* Tx timestamping enabled */
> bool rx_tstamp; /* Rx timestamping enabled */
> --
> 2.17.1
Powered by blists - more mailing lists