netdev - Re: [PATCH v5 net-next 05/12] dt-bindings: net: ti: add new cpsw switch driver bindings

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <caf68306-46ce-f97d-b45a-0fc1cd5323f7@gmail.com>
Date:   Fri, 25 Oct 2019 10:47:20 -0700
From:   Florian Fainelli <f.fainelli@...il.com>
To:     Grygorii Strashko <grygorii.strashko@...com>,
        netdev@...r.kernel.org,
        Ilias Apalodimas <ilias.apalodimas@...aro.org>,
        Andrew Lunn <andrew@...n.ch>,
        "David S . Miller" <davem@...emloft.net>,
        Ivan Khoronzhuk <ivan.khoronzhuk@...aro.org>,
        Jiri Pirko <jiri@...nulli.us>
Cc:     Sekhar Nori <nsekhar@...com>, linux-kernel@...r.kernel.org,
        linux-omap@...r.kernel.org, Murali Karicheri <m-karicheri2@...com>,
        Ivan Vecera <ivecera@...hat.com>,
        Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org
Subject: Re: [PATCH v5 net-next 05/12] dt-bindings: net: ti: add new cpsw
 switch driver bindings

On 10/24/19 3:09 AM, Grygorii Strashko wrote:
> Add bindings for the new TI CPSW switch driver. Comparing to the legacy
> bindings (net/cpsw.txt):
> - ports definition follows DSA bindings (net/dsa/dsa.txt) and ports can be
> marked as "disabled" if not physically wired.
> - all deprecated properties dropped;
> - all legacy propertiies dropped which represent constant HW cpapbilities
> (cpdma_channels, ale_entries, bd_ram_size, mac_control, slaves,
> active_slave)
> - TI CPTS DT properties are reused as is, but grouped in "cpts" sub-node
> - TI Davinci MDIO DT bindings are reused as is, because Davinci MDIO is
> reused.
> 
> Signed-off-by: Grygorii Strashko <grygorii.strashko@...com>
> ---

[snip]
> +- mdio : CPSW MDIO bus block description
> +	- bus_freq : MDIO Bus frequency

clock-frequency is a more typical property to describe the bus clock's
frequency, that is what i2c and spi do.

> +	See bindings/net/mdio.txt and davinci-mdio.txt
> +
> +- cpts : The Common Platform Time Sync (CPTS) module description
> +	- clocks : should contain the CPTS reference clock
> +	- clock-names : should be "cpts"
> +	See bindings/clock/clock-bindings.txt
> +
> +	Optional properties - all ports:
> +	- cpts_clock_mult : Numerator to convert input clock ticks into ns
> +	- cpts_clock_shift : Denominator to convert input clock ticks into ns
> +			  Mult and shift will be calculated basing on CPTS
> +			  rftclk frequency if both cpts_clock_shift and
> +			  cpts_clock_mult properties are not provided.

Why would those two be needed that would be modeled in the Linux Common
Clock Framework?
-- 
Florian