[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20191030093451.26325-3-idosch@idosch.org>
Date: Wed, 30 Oct 2019 11:34:49 +0200
From: Ido Schimmel <idosch@...sch.org>
To: netdev@...r.kernel.org
Cc: davem@...emloft.net, jiri@...lanox.com, mlxsw@...lanox.com,
Ido Schimmel <idosch@...lanox.com>
Subject: [PATCH net-next v2 2/4] mlxsw: pci: Increase PCI reset timeout for SN3800 systems
From: Ido Schimmel <idosch@...lanox.com>
SN3800 Spectrum-2 based systems have gearboxes that need to be
initialized by the firmware during its initialization flow. In certain
cases, the firmware might need to flash these gearboxes, which is
currently a time-consuming process.
In newer firmware versions, the firmware will not signal to the driver
that it is ready until the gearboxes are flashed. Increase the PCI reset
timeout for these situations. In normal cases, the driver will need to
wait no longer than 5 seconds.
Signed-off-by: Ido Schimmel <idosch@...lanox.com>
---
drivers/net/ethernet/mellanox/mlxsw/pci_hw.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/pci_hw.h b/drivers/net/ethernet/mellanox/mlxsw/pci_hw.h
index 2b3aec482742..e0d7d2d9a0c8 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/pci_hw.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/pci_hw.h
@@ -27,7 +27,7 @@
#define MLXSW_PCI_SW_RESET 0xF0010
#define MLXSW_PCI_SW_RESET_RST_BIT BIT(0)
-#define MLXSW_PCI_SW_RESET_TIMEOUT_MSECS 20000
+#define MLXSW_PCI_SW_RESET_TIMEOUT_MSECS 900000
#define MLXSW_PCI_SW_RESET_WAIT_MSECS 100
#define MLXSW_PCI_FW_READY 0xA1844
#define MLXSW_PCI_FW_READY_MASK 0xFFFF
--
2.21.0
Powered by blists - more mailing lists