netdev - Re: [PATCH v2 03/11] DTS: ARM: pandora-common: define wl1251 as child node of mmc3

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 30 Oct 2019 17:44:21 +0100
From:   Ulf Hansson <ulf.hansson@...aro.org>
To:     "H. Nikolaus Schaller" <hns@...delico.com>
Cc:     Benoît Cousson <bcousson@...libre.com>,
        Tony Lindgren <tony@...mide.com>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Russell King <linux@...linux.org.uk>,
        Kalle Valo <kvalo@...eaurora.org>,
        Mike Rapoport <rppt@...ux.ibm.com>,
        David Sterba <dsterba@...e.com>,
        "Rafael J. Wysocki" <rafael.j.wysocki@...el.com>,
        Petr Mladek <pmladek@...e.com>,
        Sakari Ailus <sakari.ailus@...ux.intel.com>,
        Kefeng Wang <wangkefeng.wang@...wei.com>,
        Yangtao Li <tiny.windzz@...il.com>,
        Alexios Zavras <alexios.zavras@...el.com>,
        Thomas Gleixner <tglx@...utronix.de>,
        Allison Randal <allison@...utok.net>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        John Stultz <john.stultz@...aro.org>,
        Bjorn Helgaas <bhelgaas@...gle.com>,
        linux-omap <linux-omap@...r.kernel.org>,
        DTML <devicetree@...r.kernel.org>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        Linux ARM <linux-arm-kernel@...ts.infradead.org>,
        "linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>,
        linux-wireless <linux-wireless@...r.kernel.org>,
        netdev <netdev@...r.kernel.org>,
        Discussions about the Letux Kernel 
        <letux-kernel@...nphoenux.org>, kernel@...a-handheld.com,
        "# 4.0+" <stable@...r.kernel.org>
Subject: Re: [PATCH v2 03/11] DTS: ARM: pandora-common: define wl1251 as child
 node of mmc3

On Sat, 19 Oct 2019 at 20:42, H. Nikolaus Schaller <hns@...delico.com> wrote:
>
> Since v4.7 the dma initialization requires that there is a
> device tree property for "rx" and "tx" channels which is
> not provided by the pdata-quirks initialization.
>
> By conversion of the mmc3 setup to device tree this will
> finally allows to remove the OpenPandora wlan specific omap3
> data-quirks.
>
> Fixes: 81eef6ca9201 ("mmc: omap_hsmmc: Use dma_request_chan() for requesting DMA channel")
>
> Signed-off-by: H. Nikolaus Schaller <hns@...delico.com>
> Cc: <stable@...r.kernel.org> # 4.7.0
> ---
>  arch/arm/boot/dts/omap3-pandora-common.dtsi | 37 +++++++++++++++++++--
>  1 file changed, 35 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi
> index ec5891718ae6..c595b3eb314d 100644
> --- a/arch/arm/boot/dts/omap3-pandora-common.dtsi
> +++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi
> @@ -226,6 +226,18 @@
>                 gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>;     /* GPIO_164 */
>         };
>
> +       /* wl1251 wifi+bt module */
> +       wlan_en: fixed-regulator-wg7210_en {
> +               compatible = "regulator-fixed";
> +               regulator-name = "vwlan";
> +               regulator-min-microvolt = <1800000>;
> +               regulator-max-microvolt = <1800000>;

I doubt these are correct.

I guess this should be in the range of 2.7V-3.6V.

> +               startup-delay-us = <50000>;
> +               regulator-always-on;

Always on?

> +               enable-active-high;
> +               gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>;
> +       };
> +
>         /* wg7210 (wifi+bt module) 32k clock buffer */
>         wg7210_32k: fixed-regulator-wg7210_32k {
>                 compatible = "regulator-fixed";
> @@ -522,9 +534,30 @@
>         /*wp-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;*/    /* GPIO_127 */
>  };
>
> -/* mmc3 is probed using pdata-quirks to pass wl1251 card data */
>  &mmc3 {
> -       status = "disabled";
> +       vmmc-supply = <&wlan_en>;
> +
> +       bus-width = <4>;
> +       non-removable;
> +       ti,non-removable;
> +       cap-power-off-card;
> +
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&mmc3_pins>;
> +
> +       #address-cells = <1>;
> +       #size-cells = <0>;
> +
> +       wlan: wl1251@1 {
> +               compatible = "ti,wl1251";
> +
> +               reg = <1>;
> +
> +               interrupt-parent = <&gpio1>;
> +               interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;  /* GPIO_21 */
> +
> +               ti,wl1251-has-eeprom;
> +       };
>  };
>
>  /* bluetooth*/
> --
> 2.19.1
>

Kind regards
Uffe