| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 04 Nov 2019 10:56:52 -0800
From: John Fastabend <john.fastabend@...il.com>
To: Jakub Kicinski <jakub.kicinski@...ronome.com>,
John Fastabend <john.fastabend@...il.com>
Cc: davem@...emloft.net, netdev@...r.kernel.org,
oss-drivers@...ronome.com, borisp@...lanox.com,
aviadye@...lanox.com, daniel@...earbox.net,
syzbot+f8495bff23a879a6d0bd@...kaller.appspotmail.com,
syzbot+6f50c99e8f6194bf363f@...kaller.appspotmail.com,
Eric Biggers <ebiggers@...nel.org>,
herbert@...dor.apana.org.au, glider@...gle.com,
linux-crypto@...r.kernel.org
Subject: Re: [oss-drivers] Re: [PATCH net] net/tls: fix sk_msg trim on
fallback to copy mode
Jakub Kicinski wrote:
> On Fri, 1 Nov 2019 10:22:38 -0700, Jakub Kicinski wrote:
> > > > + msg->sg.copybreak = 0;
> > > > + } else if (sk_msg_iter_dist(msg->sg.start, msg->sg.curr) >
> > > > + sk_msg_iter_dist(msg->sg.end, msg->sg.curr)) {
> > > > + sk_msg_iter_var_prev(i);
> > >
> > > I suspect with small update to dist logic the special case could also
> > > be dropped here. But I have a preference for my example above at the
> > > moment. Just getting coffee now so will think on it though.
> >
> > Oka, I like the dist thing, I thought that's where you were going in
> > your first email :)
> >
> > I need to do some more admin, and then I'll probably write a unit test
> > for this code (use space version).. So we can test either patch with it.
>
> Attaching my "unit test", you should be able to just replace
> sk_msg_trim() with yours and re-run. That said my understanding of the
> expected geometry of the buffer may not be correct :)
>
> The patch I posted yesterday, with the small adjustment to set curr to
> start on empty message passes that test, here it is again:
>
> ----->8-----
>
> From 953df5bc0992e31a2c7863ea8b8e490ba7a07356 Mon Sep 17 00:00:00 2001
> From: Jakub Kicinski <jakub.kicinski@...ronome.com>
> Date: Tue, 29 Oct 2019 20:20:49 -0700
> Subject: [PATCH net] net/tls: fix sk_msg trim on fallback to copy mode
>
> sk_msg_trim() tries to only update curr pointer if it falls into
> the trimmed region. The logic, however, does not take into the
> account pointer wrapping that sk_msg_iter_var_prev() does nor
> (as John points out) the fact that msg->sg is a ring buffer.
>
> This means that when the message was trimmed completely, the new
> curr pointer would have the value of MAX_MSG_FRAGS - 1, which is
> neither smaller than any other value, nor would it actually be
> correct.
>
> Special case the trimming to 0 length a little bit and rework
> the comparison between curr and end to take into account wrapping.
>
> This bug caused the TLS code to not copy all of the message, if
> zero copy filled in fewer sg entries than memcopy would need.
>
> Big thanks to Alexander Potapenko for the non-KMSAN reproducer.
>
> v2:
> - take into account that msg->sg is a ring buffer (John).
>
> Fixes: d829e9c4112b ("tls: convert to generic sk_msg interface")
> Suggested-by: John Fastabend <john.fastabend@...il.com>
> Reported-by: syzbot+f8495bff23a879a6d0bd@...kaller.appspotmail.com
> Reported-by: syzbot+6f50c99e8f6194bf363f@...kaller.appspotmail.com
> Signed-off-by: Jakub Kicinski <jakub.kicinski@...ronome.com>
> ---
> include/linux/skmsg.h | 9 ++++++---
> net/core/skmsg.c | 20 +++++++++++++++-----
> 2 files changed, 21 insertions(+), 8 deletions(-)
>
> diff --git a/include/linux/skmsg.h b/include/linux/skmsg.h
> index e4b3fb4bb77c..ce7055259877 100644
> --- a/include/linux/skmsg.h
> +++ b/include/linux/skmsg.h
> @@ -139,6 +139,11 @@ static inline void sk_msg_apply_bytes(struct sk_psock *psock, u32 bytes)
> }
> }
>
> +static inline u32 sk_msg_iter_dist(u32 start, u32 end)
> +{
> + return end >= start ? end - start : end + (MAX_MSG_FRAGS - start);
> +}
> +
> #define sk_msg_iter_var_prev(var) \
> do { \
> if (var == 0) \
> @@ -198,9 +203,7 @@ static inline u32 sk_msg_elem_used(const struct sk_msg *msg)
> if (sk_msg_full(msg))
> return MAX_MSG_FRAGS;
>
> - return msg->sg.end >= msg->sg.start ?
> - msg->sg.end - msg->sg.start :
> - msg->sg.end + (MAX_MSG_FRAGS - msg->sg.start);
> + return sk_msg_iter_dist(msg->sg.start, msg->sg.end);
> }
I think its nice to pull this into a helper so I'm ok with also using the
dist below, except for one comment below.
>
> static inline struct scatterlist *sk_msg_elem(struct sk_msg *msg, int which)
> diff --git a/net/core/skmsg.c b/net/core/skmsg.c
> index cf390e0aa73d..f87fde3a846c 100644
> --- a/net/core/skmsg.c
> +++ b/net/core/skmsg.c
> @@ -270,18 +270,28 @@ void sk_msg_trim(struct sock *sk, struct sk_msg *msg, int len)
>
> msg->sg.data[i].length -= trim;
> sk_mem_uncharge(sk, trim);
> + /* Adjust copybreak if it falls into the trimmed part of last buf */
> + if (msg->sg.curr == i && msg->sg.copybreak > msg->sg.data[i].length)
> + msg->sg.copybreak = msg->sg.data[i].length;
> out:
> - /* If we trim data before curr pointer update copybreak and current
> - * so that any future copy operations start at new copy location.
> + sk_msg_iter_var_next(i);
> + msg->sg.end = i;
> +
> + /* If we trim data a full sg elem before curr pointer update
> + * copybreak and current so that any future copy operations
> + * start at new copy location.
> * However trimed data that has not yet been used in a copy op
> * does not require an update.
> */
> - if (msg->sg.curr >= i) {
> + if (!msg->sg.size) {
> + msg->sg.curr = msg->sg.start;
> + msg->sg.copybreak = 0;
> + } else if (sk_msg_iter_dist(msg->sg.start, msg->sg.curr) >
> + sk_msg_iter_dist(msg->sg.end, msg->sg.curr)) {
I'm not seeing how this can work. Taking simple case with start < end
so normal geometry without wrapping. Let,
start = 1
curr = 3
end = 4
We could trim an index to get,
start = 1
curr = 3
i = 3
end = 4
Then after out: label this would push end up one,
start = 1
curr = 3
i = 3
end = 4
But dist(start,curr) = 2 and dist(end, curr) = 1 and we would set curr
to '3' but clear the copybreak? I think a better comparison would be,
if (sk_msg_iter_dist(msg->sg.start, i) <
sk_msg_iter_dist(msg->sg.start, msg->sg.curr)
To check if 'i' walked past curr so we can reset curr/copybreak?
> + sk_msg_iter_var_prev(i);
> msg->sg.curr = i;
> msg->sg.copybreak = msg->sg.data[i].length;
> }
> - sk_msg_iter_var_next(i);
> - msg->sg.end = i;
> }
> EXPORT_SYMBOL_GPL(sk_msg_trim);
>
> --
> 2.23.0
>
Powered by blists - more mailing lists