netdev - [net 4/4] net/mlx5e: Use correct enum to determine uplink port

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 6 Nov 2019 22:05:45 +0000
From:   Saeed Mahameed <saeedm@...lanox.com>
To:     "David S. Miller" <davem@...emloft.net>
CC:     "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
        Dmytro Linkin <dmitrolin@...lanox.com>,
        Vlad Buslov <vladbu@...lanox.com>,
        Roi Dayan <roid@...lanox.com>,
        Saeed Mahameed <saeedm@...lanox.com>
Subject: [net 4/4] net/mlx5e: Use correct enum to determine uplink port

From: Dmytro Linkin <dmitrolin@...lanox.com>

For vlan push action, if eswitch flow source capability is enabled, flow
source value compared with MLX5_VPORT_UPLINK enum, to determine uplink
port. This lead to syndrome in dmesg if try to add vlan push action.
For example:
 $ tc filter add dev vxlan0 ingress protocol ip prio 1 flower \
       enc_dst_port 4789 \
       action tunnel_key unset pipe \
       action vlan push id 20 pipe \
       action mirred egress redirect dev ens1f0_0
 $ dmesg
 ...
 [ 2456.883693] mlx5_core 0000:82:00.0: mlx5_cmd_check:756:(pid 5273): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0xa9c090)
Use the correct enum value MLX5_FLOW_CONTEXT_FLOW_SOURCE_UPLINK.

Fixes: bb204dcf39fe ("net/mlx5e: Determine source port properly for vlan push action")
Signed-off-by: Dmytro Linkin <dmitrolin@...lanox.com>
Reviewed-by: Vlad Buslov <vladbu@...lanox.com>
Reviewed-by: Roi Dayan <roid@...lanox.com>
Signed-off-by: Saeed Mahameed <saeedm@...lanox.com>
---
 .../net/ethernet/mellanox/mlx5/core/eswitch_offloads_termtbl.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads_termtbl.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads_termtbl.c
index 7879e1746297..366bda1bb1c3 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads_termtbl.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads_termtbl.c
@@ -183,7 +183,8 @@ static bool mlx5_eswitch_offload_is_uplink_port(const struct mlx5_eswitch *esw,
 	u32 port_mask, port_value;
 
 	if (MLX5_CAP_ESW_FLOWTABLE(esw->dev, flow_source))
-		return spec->flow_context.flow_source == MLX5_VPORT_UPLINK;
+		return spec->flow_context.flow_source ==
+					MLX5_FLOW_CONTEXT_FLOW_SOURCE_UPLINK;
 
 	port_mask = MLX5_GET(fte_match_param, spec->match_criteria,
 			     misc_parameters.source_port);
-- 
2.21.0