[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <327bddf3762b297cc106123e5b0e090c8bf495dc.camel@intel.com>
Date: Wed, 06 Nov 2019 15:49:57 -0800
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net,
"jakub.kicinski" <jakub.kicinski@...ronome.com>
Cc: netdev@...r.kernel.org, nhorman@...hat.com, sassmann@...hat.com
Subject: Re: [net-next v2 00/14][pull request] 100GbE Intel Wired LAN Driver
Updates 2019-11-06
On Wed, 2019-11-06 at 11:37 -0800, Jeff Kirsher wrote:
> This series contains updates to ice driver only.
>
> Jesse implements set_eeprom functionality in ethtool by adding
> functions
> to enable reading of the NVM image.
>
> Scott adds ethtool -m support so that we can read eeprom data on
> SFP/OSFP
> modules.
>
> Anirudh updates the return value to properly reflect when SRIOV is
> not
> supported.
>
> Md Fahad updates the driver to handle a change in the NVM, where the
> boot configuration section was moved to the Preserved Field Area
> (PFA)
> of the NVM.
>
> Paul resolves an issue when DCBx requests non-contiguous TCs,
> transmit
> hangs could occur, so configure a default traffic class (TC0) in
> these
> cases to prevent traffic hangs. Adds a print statement to notify the
> user when unsupported modules are inserted.
>
> Bruce fixes up the driver unload code flow to ensure we do not clear
> the
> interrupt scheme until the reset is complete, otherwise a hardware
> error
> may occur.
>
> Dave updates the DCB initialization to set is_sw_lldp boolean when
> the
> firmware has been detected to be in an untenable state. This will
> ensure that the firmware is in a known state.
>
> Michal saves off the PCI state and I/O BARs address after PCI bus
> reset
> so that after the reset, device registers can be read. Also adds a
> NULL
> pointer check to prevent a potential kernel panic.
>
> Mitch resolves an issue where VF's on PF's other than 0 were not
> seeing
> resets by using the per-PF VF ID instead of the absolute VF ID.
>
> Krzysztof does some code cleanup to remove a unneeded wrapper and
> reduces the code complexity.
>
> Brett reduces confusion by changing the name of ice_vc_dis_vf() to
> ice_vc_reset_vf() to better describe what the function is actually
> doing.
>
> v2: dropped patch 3 "ice: Add support for FW recovery mode detection"
> from the origin al series, while Ani makes changes based on
> community feedback to implement devlink into the changes.
Sorry for the thrash, I will need to generate a v3 of this series. I
need to drop patch 1 of the series as well, since these driver changes
will be affected by Ani's work to implement devlink into the driver, as
well as we found a bug with this particular patch.
Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)
Powered by blists - more mailing lists