netdev - [PATCH AUTOSEL 4.19 049/205] i40e: Check and correct speed values for link on open

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Message-Id: <20191108113752.12502-49-sashal@kernel.org>
Date:   Fri,  8 Nov 2019 06:35:16 -0500
From:   Sasha Levin <sashal@...nel.org>
To:     linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc:     Jan Sokolowski <jan.sokolowski@...el.com>,
        Andrew Bowers <andrewx.bowers@...el.com>,
        Jeff Kirsher <jeffrey.t.kirsher@...el.com>,
        Sasha Levin <sashal@...nel.org>, netdev@...r.kernel.org
Subject: [PATCH AUTOSEL 4.19 049/205] i40e: Check and correct speed values for link on open

From: Jan Sokolowski <jan.sokolowski@...el.com>

[ Upstream commit e78d9a39fd06109022d11c8ca444cfcec2abb290 ]

If our card has been put in an unstable state due to
other drivers interacting with it, speed settings
might be incorrect. If incorrect, forcefully reset them
on open to known default values.

Signed-off-by: Jan Sokolowski <jan.sokolowski@...el.com>
Tested-by: Andrew Bowers <andrewx.bowers@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 27 ++++++++++++++++++---
 1 file changed, 24 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 055562c930fb0..1577dbaab7425 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -6587,6 +6587,24 @@ static i40e_status i40e_force_link_state(struct i40e_pf *pf, bool is_up)
 	struct i40e_hw *hw = &pf->hw;
 	i40e_status err;
 	u64 mask;
+	u8 speed;
+
+	/* Card might've been put in an unstable state by other drivers
+	 * and applications, which causes incorrect speed values being
+	 * set on startup. In order to clear speed registers, we call
+	 * get_phy_capabilities twice, once to get initial state of
+	 * available speeds, and once to get current PHY config.
+	 */
+	err = i40e_aq_get_phy_capabilities(hw, false, true, &abilities,
+					   NULL);
+	if (err) {
+		dev_err(&pf->pdev->dev,
+			"failed to get phy cap., ret =  %s last_status =  %s\n",
+			i40e_stat_str(hw, err),
+			i40e_aq_str(hw, hw->aq.asq_last_status));
+		return err;
+	}
+	speed = abilities.link_speed;
 
 	/* Get the current phy config */
 	err = i40e_aq_get_phy_capabilities(hw, false, false, &abilities,
@@ -6600,9 +6618,9 @@ static i40e_status i40e_force_link_state(struct i40e_pf *pf, bool is_up)
 	}
 
 	/* If link needs to go up, but was not forced to go down,
-	 * no need for a flap
+	 * and its speed values are OK, no need for a flap
 	 */
-	if (is_up && abilities.phy_type != 0)
+	if (is_up && abilities.phy_type != 0 && abilities.link_speed != 0)
 		return I40E_SUCCESS;
 
 	/* To force link we need to set bits for all supported PHY types,
@@ -6614,7 +6632,10 @@ static i40e_status i40e_force_link_state(struct i40e_pf *pf, bool is_up)
 	config.phy_type_ext = is_up ? (u8)((mask >> 32) & 0xff) : 0;
 	/* Copy the old settings, except of phy_type */
 	config.abilities = abilities.abilities;
-	config.link_speed = abilities.link_speed;
+	if (abilities.link_speed != 0)
+		config.link_speed = abilities.link_speed;
+	else
+		config.link_speed = speed;
 	config.eee_capability = abilities.eee_capability;
 	config.eeer = abilities.eeer_val;
 	config.low_power_ctrl = abilities.d3_lpan;
-- 
2.20.1