netdev - [net-next v2 15/15] ice: print opcode when printing controlq errors

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20191108203806.12109-16-jeffrey.t.kirsher@intel.com>
Date:   Fri,  8 Nov 2019 12:38:06 -0800
From:   Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To:     davem@...emloft.net
Cc:     Jacob Keller <jacob.e.keller@...el.com>, netdev@...r.kernel.org,
        nhorman@...hat.com, sassmann@...hat.com,
        Andrew Bowers <andrewx.bowers@...el.com>,
        Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next v2 15/15] ice: print opcode when printing controlq errors

From: Jacob Keller <jacob.e.keller@...el.com>

To help aid in debugging, display the command opcode in debug messages
that print an error code. This makes it easier to see what command
failed if only ICE_DBG_AQ_MSG is enabled.

Signed-off-by: Jacob Keller <jacob.e.keller@...el.com>
Tested-by: Andrew Bowers <andrewx.bowers@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
 drivers/net/ethernet/intel/ice/ice_controlq.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_controlq.c b/drivers/net/ethernet/intel/ice/ice_controlq.c
index 947728aada46..dd946866d7b8 100644
--- a/drivers/net/ethernet/intel/ice/ice_controlq.c
+++ b/drivers/net/ethernet/intel/ice/ice_controlq.c
@@ -1017,7 +1017,8 @@ ice_sq_send_cmd(struct ice_hw *hw, struct ice_ctl_q_info *cq,
 		retval = le16_to_cpu(desc->retval);
 		if (retval) {
 			ice_debug(hw, ICE_DBG_AQ_MSG,
-				  "Control Send Queue command completed with error 0x%x\n",
+				  "Control Send Queue command 0x%04X completed with error 0x%X\n",
+				  le16_to_cpu(desc->opcode),
 				  retval);
 
 			/* strip off FW internal code */
@@ -1121,7 +1122,8 @@ ice_clean_rq_elem(struct ice_hw *hw, struct ice_ctl_q_info *cq,
 	if (flags & ICE_AQ_FLAG_ERR) {
 		ret_code = ICE_ERR_AQ_ERROR;
 		ice_debug(hw, ICE_DBG_AQ_MSG,
-			  "Control Receive Queue Event received with error 0x%x\n",
+			  "Control Receive Queue Event 0x%04X received with error 0x%X\n",
+			  le16_to_cpu(desc->opcode),
 			  cq->rq_last_status);
 	}
 	memcpy(&e->desc, desc, sizeof(e->desc));
-- 
2.21.0