[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20191108203806.12109-6-jeffrey.t.kirsher@intel.com>
Date: Fri, 8 Nov 2019 12:37:56 -0800
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Usha Ketineni <usha.k.ketineni@...el.com>, netdev@...r.kernel.org,
nhorman@...hat.com, sassmann@...hat.com,
Andrew Bowers <andrewx.bowers@...el.com>,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next v2 05/15] ice: Fix to change Rx/Tx ring descriptor size via ethtool with DCBx
From: Usha Ketineni <usha.k.ketineni@...el.com>
This patch fixes the call trace caused by the kernel when the Rx/Tx
descriptor size change request is initiated via ethtool when DCB is
configured. ice_set_ringparam() should use vsi->num_txq instead of
vsi->alloc_txq as it represents the queues that are enabled in the
driver when DCB is enabled/disabled. Otherwise, queue index being
used can go out of range.
For example, when vsi->alloc_txq has 104 queues and with 3 TCS enabled
via DCB, each TC gets 34 queues, vsi->num_txq will be 102 and only 102
queues will be enabled.
Signed-off-by: Usha Ketineni <usha.k.ketineni@...el.com>
Tested-by: Andrew Bowers <andrewx.bowers@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/ethernet/intel/ice/ice_ethtool.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_ethtool.c b/drivers/net/ethernet/intel/ice/ice_ethtool.c
index a8e51bc95198..f85d224f964d 100644
--- a/drivers/net/ethernet/intel/ice/ice_ethtool.c
+++ b/drivers/net/ethernet/intel/ice/ice_ethtool.c
@@ -2654,14 +2654,14 @@ ice_set_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring)
netdev_info(netdev, "Changing Tx descriptor count from %d to %d\n",
vsi->tx_rings[0]->count, new_tx_cnt);
- tx_rings = devm_kcalloc(&pf->pdev->dev, vsi->alloc_txq,
+ tx_rings = devm_kcalloc(&pf->pdev->dev, vsi->num_txq,
sizeof(*tx_rings), GFP_KERNEL);
if (!tx_rings) {
err = -ENOMEM;
goto done;
}
- for (i = 0; i < vsi->alloc_txq; i++) {
+ ice_for_each_txq(vsi, i) {
/* clone ring and setup updated count */
tx_rings[i] = *vsi->tx_rings[i];
tx_rings[i].count = new_tx_cnt;
@@ -2714,14 +2714,14 @@ ice_set_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring)
netdev_info(netdev, "Changing Rx descriptor count from %d to %d\n",
vsi->rx_rings[0]->count, new_rx_cnt);
- rx_rings = devm_kcalloc(&pf->pdev->dev, vsi->alloc_rxq,
+ rx_rings = devm_kcalloc(&pf->pdev->dev, vsi->num_rxq,
sizeof(*rx_rings), GFP_KERNEL);
if (!rx_rings) {
err = -ENOMEM;
goto done;
}
- for (i = 0; i < vsi->alloc_rxq; i++) {
+ ice_for_each_rxq(vsi, i) {
/* clone ring and setup updated count */
rx_rings[i] = *vsi->rx_rings[i];
rx_rings[i].count = new_rx_cnt;
@@ -2759,7 +2759,7 @@ ice_set_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring)
ice_down(vsi);
if (tx_rings) {
- for (i = 0; i < vsi->alloc_txq; i++) {
+ ice_for_each_txq(vsi, i) {
ice_free_tx_ring(vsi->tx_rings[i]);
*vsi->tx_rings[i] = tx_rings[i];
}
@@ -2767,7 +2767,7 @@ ice_set_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring)
}
if (rx_rings) {
- for (i = 0; i < vsi->alloc_rxq; i++) {
+ ice_for_each_rxq(vsi, i) {
ice_free_rx_ring(vsi->rx_rings[i]);
/* copy the real tail offset */
rx_rings[i].tail = vsi->rx_rings[i]->tail;
@@ -2801,7 +2801,7 @@ ice_set_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring)
free_tx:
/* error cleanup if the Rx allocations failed after getting Tx */
if (tx_rings) {
- for (i = 0; i < vsi->alloc_txq; i++)
+ ice_for_each_txq(vsi, i)
ice_free_tx_ring(&tx_rings[i]);
devm_kfree(&pf->pdev->dev, tx_rings);
}
--
2.21.0
Powered by blists - more mailing lists