lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <193ecd02-7306-98ba-cae6-2416c177a700@gmail.com>
Date:   Sat, 9 Nov 2019 21:59:43 +0100
From:   Heiner Kallweit <hkallweit1@...il.com>
To:     Realtek linux nic maintainers <nic_swsd@...ltek.com>,
        David Miller <davem@...emloft.net>
Cc:     "netdev@...r.kernel.org" <netdev@...r.kernel.org>
Subject: [PATCH net-next 1/5] r8169: add helper r8168g_phy_param

Integrated PHY's from RTL8168g support an indirect access method for
PHY parameters. On page 0x0a43 parameter number is written to register
0x13, then the parameter can be accessed via register 0x14.
Add a helper for this to improve readability and simplify the code.

Signed-off-by: Heiner Kallweit <hkallweit1@...il.com>
---
 drivers/net/ethernet/realtek/r8169_main.c | 285 ++++++++--------------
 1 file changed, 98 insertions(+), 187 deletions(-)

diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
index 8a7b22301..dbdb77d71 100644
--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c
@@ -1086,6 +1086,17 @@ static void rtl_w0w1_phy(struct rtl8169_private *tp, int reg_addr, int p, int m)
 	rtl_writephy(tp, reg_addr, (val & ~m) | p);
 }
 
+static void r8168g_phy_param(struct phy_device *phydev, u16 parm,
+			     u16 mask, u16 val)
+{
+	int oldpage = phy_select_page(phydev, 0x0a43);
+
+	__phy_write(phydev, 0x13, parm);
+	__phy_modify(phydev, 0x14, mask, val);
+
+	phy_restore_page(phydev, oldpage, 0);
+}
+
 DECLARE_RTL_COND(rtl_ephyar_cond)
 {
 	return RTL_R32(tp, EPHYAR) & EPHYAR_FLAG;
@@ -3222,12 +3233,8 @@ static void rtl8168g_phy_adjust_10m_aldps(struct rtl8169_private *tp)
 
 	phy_modify_paged(phydev, 0x0bcc, 0x14, BIT(8), 0);
 	phy_modify_paged(phydev, 0x0a44, 0x11, 0, BIT(7) | BIT(6));
-	phy_write(phydev, 0x1f, 0x0a43);
-	phy_write(phydev, 0x13, 0x8084);
-	phy_clear_bits(phydev, 0x14, BIT(14) | BIT(13));
-	phy_set_bits(phydev, 0x10, BIT(12) | BIT(1) | BIT(0));
-
-	phy_write(phydev, 0x1f, 0x0000);
+	r8168g_phy_param(phydev, 0x8084, 0x6000, 0x0000);
+	phy_modify_paged(phydev, 0x0a43, 0x10, 0x0000, 0x1003);
 }
 
 static void rtl8168g_1_hw_phy_config(struct rtl8169_private *tp)
@@ -3257,9 +3264,7 @@ static void rtl8168g_1_hw_phy_config(struct rtl8169_private *tp)
 	phy_modify_paged(tp->phydev, 0x0a4b, 0x11, 0, BIT(2));
 
 	/* Enable UC LPF tune function */
-	rtl_writephy(tp, 0x1f, 0x0a43);
-	rtl_writephy(tp, 0x13, 0x8012);
-	rtl_w0w1_phy(tp, 0x14, 0x8000, 0x0000);
+	r8168g_phy_param(tp->phydev, 0x8012, 0x0000, 0x8000);
 
 	phy_modify_paged(tp->phydev, 0x0c42, 0x11, BIT(13), BIT(14));
 
@@ -3289,73 +3294,48 @@ static void rtl8168g_2_hw_phy_config(struct rtl8169_private *tp)
 
 static void rtl8168h_1_hw_phy_config(struct rtl8169_private *tp)
 {
+	struct phy_device *phydev = tp->phydev;
 	u16 dout_tapbin;
 	u32 data;
 
 	rtl_apply_firmware(tp);
 
 	/* CHN EST parameters adjust - giga master */
-	rtl_writephy(tp, 0x1f, 0x0a43);
-	rtl_writephy(tp, 0x13, 0x809b);
-	rtl_w0w1_phy(tp, 0x14, 0x8000, 0xf800);
-	rtl_writephy(tp, 0x13, 0x80a2);
-	rtl_w0w1_phy(tp, 0x14, 0x8000, 0xff00);
-	rtl_writephy(tp, 0x13, 0x80a4);
-	rtl_w0w1_phy(tp, 0x14, 0x8500, 0xff00);
-	rtl_writephy(tp, 0x13, 0x809c);
-	rtl_w0w1_phy(tp, 0x14, 0xbd00, 0xff00);
-	rtl_writephy(tp, 0x1f, 0x0000);
+	r8168g_phy_param(phydev, 0x809b, 0xf800, 0x8000);
+	r8168g_phy_param(phydev, 0x80a2, 0xff00, 0x8000);
+	r8168g_phy_param(phydev, 0x80a4, 0xff00, 0x8500);
+	r8168g_phy_param(phydev, 0x809c, 0xff00, 0xbd00);
 
 	/* CHN EST parameters adjust - giga slave */
-	rtl_writephy(tp, 0x1f, 0x0a43);
-	rtl_writephy(tp, 0x13, 0x80ad);
-	rtl_w0w1_phy(tp, 0x14, 0x7000, 0xf800);
-	rtl_writephy(tp, 0x13, 0x80b4);
-	rtl_w0w1_phy(tp, 0x14, 0x5000, 0xff00);
-	rtl_writephy(tp, 0x13, 0x80ac);
-	rtl_w0w1_phy(tp, 0x14, 0x4000, 0xff00);
-	rtl_writephy(tp, 0x1f, 0x0000);
+	r8168g_phy_param(phydev, 0x80ad, 0xf800, 0x7000);
+	r8168g_phy_param(phydev, 0x80b4, 0xff00, 0x5000);
+	r8168g_phy_param(phydev, 0x80ac, 0xff00, 0x4000);
 
 	/* CHN EST parameters adjust - fnet */
-	rtl_writephy(tp, 0x1f, 0x0a43);
-	rtl_writephy(tp, 0x13, 0x808e);
-	rtl_w0w1_phy(tp, 0x14, 0x1200, 0xff00);
-	rtl_writephy(tp, 0x13, 0x8090);
-	rtl_w0w1_phy(tp, 0x14, 0xe500, 0xff00);
-	rtl_writephy(tp, 0x13, 0x8092);
-	rtl_w0w1_phy(tp, 0x14, 0x9f00, 0xff00);
-	rtl_writephy(tp, 0x1f, 0x0000);
+	r8168g_phy_param(phydev, 0x808e, 0xff00, 0x1200);
+	r8168g_phy_param(phydev, 0x8090, 0xff00, 0xe500);
+	r8168g_phy_param(phydev, 0x8092, 0xff00, 0x9f00);
 
 	/* enable R-tune & PGA-retune function */
 	dout_tapbin = 0;
-	rtl_writephy(tp, 0x1f, 0x0a46);
-	data = rtl_readphy(tp, 0x13);
+	data = phy_read_paged(phydev, 0x0a46, 0x13);
 	data &= 3;
 	data <<= 2;
 	dout_tapbin |= data;
-	data = rtl_readphy(tp, 0x12);
+	data = phy_read_paged(phydev, 0x0a46, 0x12);
 	data &= 0xc000;
 	data >>= 14;
 	dout_tapbin |= data;
 	dout_tapbin = ~(dout_tapbin^0x08);
 	dout_tapbin <<= 12;
 	dout_tapbin &= 0xf000;
-	rtl_writephy(tp, 0x1f, 0x0a43);
-	rtl_writephy(tp, 0x13, 0x827a);
-	rtl_w0w1_phy(tp, 0x14, dout_tapbin, 0xf000);
-	rtl_writephy(tp, 0x13, 0x827b);
-	rtl_w0w1_phy(tp, 0x14, dout_tapbin, 0xf000);
-	rtl_writephy(tp, 0x13, 0x827c);
-	rtl_w0w1_phy(tp, 0x14, dout_tapbin, 0xf000);
-	rtl_writephy(tp, 0x13, 0x827d);
-	rtl_w0w1_phy(tp, 0x14, dout_tapbin, 0xf000);
-
-	rtl_writephy(tp, 0x1f, 0x0a43);
-	rtl_writephy(tp, 0x13, 0x0811);
-	rtl_w0w1_phy(tp, 0x14, 0x0800, 0x0000);
-	rtl_writephy(tp, 0x1f, 0x0a42);
-	rtl_w0w1_phy(tp, 0x16, 0x0002, 0x0000);
-	rtl_writephy(tp, 0x1f, 0x0000);
+
+	r8168g_phy_param(phydev, 0x827a, 0xf000, dout_tapbin);
+	r8168g_phy_param(phydev, 0x827b, 0xf000, dout_tapbin);
+	r8168g_phy_param(phydev, 0x827c, 0xf000, dout_tapbin);
+	r8168g_phy_param(phydev, 0x827d, 0xf000, dout_tapbin);
+	r8168g_phy_param(phydev, 0x0811, 0x0000, 0x0800);
+	phy_modify_paged(phydev, 0x0a42, 0x16, 0x0000, 0x0002);
 
 	/* enable GPHY 10M */
 	phy_modify_paged(tp->phydev, 0x0a44, 0x11, 0, BIT(11));
@@ -3363,22 +3343,13 @@ static void rtl8168h_1_hw_phy_config(struct rtl8169_private *tp)
 	/* SAR ADC performance */
 	phy_modify_paged(tp->phydev, 0x0bca, 0x17, BIT(12) | BIT(13), BIT(14));
 
-	rtl_writephy(tp, 0x1f, 0x0a43);
-	rtl_writephy(tp, 0x13, 0x803f);
-	rtl_w0w1_phy(tp, 0x14, 0x0000, 0x3000);
-	rtl_writephy(tp, 0x13, 0x8047);
-	rtl_w0w1_phy(tp, 0x14, 0x0000, 0x3000);
-	rtl_writephy(tp, 0x13, 0x804f);
-	rtl_w0w1_phy(tp, 0x14, 0x0000, 0x3000);
-	rtl_writephy(tp, 0x13, 0x8057);
-	rtl_w0w1_phy(tp, 0x14, 0x0000, 0x3000);
-	rtl_writephy(tp, 0x13, 0x805f);
-	rtl_w0w1_phy(tp, 0x14, 0x0000, 0x3000);
-	rtl_writephy(tp, 0x13, 0x8067);
-	rtl_w0w1_phy(tp, 0x14, 0x0000, 0x3000);
-	rtl_writephy(tp, 0x13, 0x806f);
-	rtl_w0w1_phy(tp, 0x14, 0x0000, 0x3000);
-	rtl_writephy(tp, 0x1f, 0x0000);
+	r8168g_phy_param(phydev, 0x803f, 0x3000, 0x0000);
+	r8168g_phy_param(phydev, 0x8047, 0x3000, 0x0000);
+	r8168g_phy_param(phydev, 0x804f, 0x3000, 0x0000);
+	r8168g_phy_param(phydev, 0x8057, 0x3000, 0x0000);
+	r8168g_phy_param(phydev, 0x805f, 0x3000, 0x0000);
+	r8168g_phy_param(phydev, 0x8067, 0x3000, 0x0000);
+	r8168g_phy_param(phydev, 0x806f, 0x3000, 0x0000);
 
 	/* disable phy pfm mode */
 	phy_modify_paged(tp->phydev, 0x0a44, 0x11, BIT(7), 0);
@@ -3391,24 +3362,18 @@ static void rtl8168h_1_hw_phy_config(struct rtl8169_private *tp)
 static void rtl8168h_2_hw_phy_config(struct rtl8169_private *tp)
 {
 	u16 ioffset_p3, ioffset_p2, ioffset_p1, ioffset_p0;
+	struct phy_device *phydev = tp->phydev;
 	u16 rlen;
 	u32 data;
 
 	rtl_apply_firmware(tp);
 
 	/* CHIN EST parameter update */
-	rtl_writephy(tp, 0x1f, 0x0a43);
-	rtl_writephy(tp, 0x13, 0x808a);
-	rtl_w0w1_phy(tp, 0x14, 0x000a, 0x003f);
-	rtl_writephy(tp, 0x1f, 0x0000);
+	r8168g_phy_param(phydev, 0x808a, 0x003f, 0x000a);
 
 	/* enable R-tune & PGA-retune function */
-	rtl_writephy(tp, 0x1f, 0x0a43);
-	rtl_writephy(tp, 0x13, 0x0811);
-	rtl_w0w1_phy(tp, 0x14, 0x0800, 0x0000);
-	rtl_writephy(tp, 0x1f, 0x0a42);
-	rtl_w0w1_phy(tp, 0x16, 0x0002, 0x0000);
-	rtl_writephy(tp, 0x1f, 0x0000);
+	r8168g_phy_param(phydev, 0x0811, 0x0000, 0x0800);
+	phy_modify_paged(phydev, 0x0a42, 0x16, 0x0000, 0x0002);
 
 	/* enable GPHY 10M */
 	phy_modify_paged(tp->phydev, 0x0a44, 0x11, 0, BIT(11));
@@ -3428,26 +3393,20 @@ static void rtl8168h_2_hw_phy_config(struct rtl8169_private *tp)
 	data = (ioffset_p3<<12)|(ioffset_p2<<8)|(ioffset_p1<<4)|(ioffset_p0);
 
 	if ((ioffset_p3 != 0x0f) || (ioffset_p2 != 0x0f) ||
-	    (ioffset_p1 != 0x0f) || (ioffset_p0 != 0x0f)) {
-		rtl_writephy(tp, 0x1f, 0x0bcf);
-		rtl_writephy(tp, 0x16, data);
-		rtl_writephy(tp, 0x1f, 0x0000);
-	}
+	    (ioffset_p1 != 0x0f) || (ioffset_p0 != 0x0f))
+		phy_write_paged(phydev, 0x0bcf, 0x16, data);
 
 	/* Modify rlen (TX LPF corner frequency) level */
-	rtl_writephy(tp, 0x1f, 0x0bcd);
-	data = rtl_readphy(tp, 0x16);
+	data = phy_read_paged(phydev, 0x0bcd, 0x16);
 	data &= 0x000f;
 	rlen = 0;
 	if (data > 3)
 		rlen = data - 3;
 	data = rlen | (rlen<<4) | (rlen<<8) | (rlen<<12);
-	rtl_writephy(tp, 0x17, data);
-	rtl_writephy(tp, 0x1f, 0x0bcd);
-	rtl_writephy(tp, 0x1f, 0x0000);
+	phy_write_paged(phydev, 0x0bcd, 0x17, data);
 
 	/* disable phy pfm mode */
-	phy_modify_paged(tp->phydev, 0x0a44, 0x11, BIT(7), 0);
+	phy_modify_paged(phydev, 0x0a44, 0x11, BIT(7), 0);
 
 	rtl8168g_disable_aldps(tp);
 	rtl8168g_config_eee_phy(tp);
@@ -3456,22 +3415,21 @@ static void rtl8168h_2_hw_phy_config(struct rtl8169_private *tp)
 
 static void rtl8168ep_1_hw_phy_config(struct rtl8169_private *tp)
 {
+	struct phy_device *phydev = tp->phydev;
+
 	/* Enable PHY auto speed down */
-	phy_modify_paged(tp->phydev, 0x0a44, 0x11, 0, BIT(3) | BIT(2));
+	phy_modify_paged(phydev, 0x0a44, 0x11, 0, BIT(3) | BIT(2));
 
 	rtl8168g_phy_adjust_10m_aldps(tp);
 
 	/* Enable EEE auto-fallback function */
-	phy_modify_paged(tp->phydev, 0x0a4b, 0x11, 0, BIT(2));
+	phy_modify_paged(phydev, 0x0a4b, 0x11, 0, BIT(2));
 
 	/* Enable UC LPF tune function */
-	rtl_writephy(tp, 0x1f, 0x0a43);
-	rtl_writephy(tp, 0x13, 0x8012);
-	rtl_w0w1_phy(tp, 0x14, 0x8000, 0x0000);
-	rtl_writephy(tp, 0x1f, 0x0000);
+	r8168g_phy_param(phydev, 0x8012, 0x0000, 0x8000);
 
 	/* set rg_sel_sdm_rate */
-	phy_modify_paged(tp->phydev, 0x0c42, 0x11, BIT(13), BIT(14));
+	phy_modify_paged(phydev, 0x0c42, 0x11, BIT(13), BIT(14));
 
 	rtl8168g_disable_aldps(tp);
 	rtl8168g_config_eee_phy(tp);
@@ -3480,63 +3438,38 @@ static void rtl8168ep_1_hw_phy_config(struct rtl8169_private *tp)
 
 static void rtl8168ep_2_hw_phy_config(struct rtl8169_private *tp)
 {
+	struct phy_device *phydev = tp->phydev;
+
 	rtl8168g_phy_adjust_10m_aldps(tp);
 
 	/* Enable UC LPF tune function */
-	rtl_writephy(tp, 0x1f, 0x0a43);
-	rtl_writephy(tp, 0x13, 0x8012);
-	rtl_w0w1_phy(tp, 0x14, 0x8000, 0x0000);
-	rtl_writephy(tp, 0x1f, 0x0000);
+	r8168g_phy_param(phydev, 0x8012, 0x0000, 0x8000);
 
 	/* Set rg_sel_sdm_rate */
 	phy_modify_paged(tp->phydev, 0x0c42, 0x11, BIT(13), BIT(14));
 
 	/* Channel estimation parameters */
-	rtl_writephy(tp, 0x1f, 0x0a43);
-	rtl_writephy(tp, 0x13, 0x80f3);
-	rtl_w0w1_phy(tp, 0x14, 0x8b00, ~0x8bff);
-	rtl_writephy(tp, 0x13, 0x80f0);
-	rtl_w0w1_phy(tp, 0x14, 0x3a00, ~0x3aff);
-	rtl_writephy(tp, 0x13, 0x80ef);
-	rtl_w0w1_phy(tp, 0x14, 0x0500, ~0x05ff);
-	rtl_writephy(tp, 0x13, 0x80f6);
-	rtl_w0w1_phy(tp, 0x14, 0x6e00, ~0x6eff);
-	rtl_writephy(tp, 0x13, 0x80ec);
-	rtl_w0w1_phy(tp, 0x14, 0x6800, ~0x68ff);
-	rtl_writephy(tp, 0x13, 0x80ed);
-	rtl_w0w1_phy(tp, 0x14, 0x7c00, ~0x7cff);
-	rtl_writephy(tp, 0x13, 0x80f2);
-	rtl_w0w1_phy(tp, 0x14, 0xf400, ~0xf4ff);
-	rtl_writephy(tp, 0x13, 0x80f4);
-	rtl_w0w1_phy(tp, 0x14, 0x8500, ~0x85ff);
-	rtl_writephy(tp, 0x1f, 0x0a43);
-	rtl_writephy(tp, 0x13, 0x8110);
-	rtl_w0w1_phy(tp, 0x14, 0xa800, ~0xa8ff);
-	rtl_writephy(tp, 0x13, 0x810f);
-	rtl_w0w1_phy(tp, 0x14, 0x1d00, ~0x1dff);
-	rtl_writephy(tp, 0x13, 0x8111);
-	rtl_w0w1_phy(tp, 0x14, 0xf500, ~0xf5ff);
-	rtl_writephy(tp, 0x13, 0x8113);
-	rtl_w0w1_phy(tp, 0x14, 0x6100, ~0x61ff);
-	rtl_writephy(tp, 0x13, 0x8115);
-	rtl_w0w1_phy(tp, 0x14, 0x9200, ~0x92ff);
-	rtl_writephy(tp, 0x13, 0x810e);
-	rtl_w0w1_phy(tp, 0x14, 0x0400, ~0x04ff);
-	rtl_writephy(tp, 0x13, 0x810c);
-	rtl_w0w1_phy(tp, 0x14, 0x7c00, ~0x7cff);
-	rtl_writephy(tp, 0x13, 0x810b);
-	rtl_w0w1_phy(tp, 0x14, 0x5a00, ~0x5aff);
-	rtl_writephy(tp, 0x1f, 0x0a43);
-	rtl_writephy(tp, 0x13, 0x80d1);
-	rtl_w0w1_phy(tp, 0x14, 0xff00, ~0xffff);
-	rtl_writephy(tp, 0x13, 0x80cd);
-	rtl_w0w1_phy(tp, 0x14, 0x9e00, ~0x9eff);
-	rtl_writephy(tp, 0x13, 0x80d3);
-	rtl_w0w1_phy(tp, 0x14, 0x0e00, ~0x0eff);
-	rtl_writephy(tp, 0x13, 0x80d5);
-	rtl_w0w1_phy(tp, 0x14, 0xca00, ~0xcaff);
-	rtl_writephy(tp, 0x13, 0x80d7);
-	rtl_w0w1_phy(tp, 0x14, 0x8400, ~0x84ff);
+	r8168g_phy_param(phydev, 0x80f3, 0xff00, 0x8b00);
+	r8168g_phy_param(phydev, 0x80f0, 0xff00, 0x3a00);
+	r8168g_phy_param(phydev, 0x80ef, 0xff00, 0x0500);
+	r8168g_phy_param(phydev, 0x80f6, 0xff00, 0x6e00);
+	r8168g_phy_param(phydev, 0x80ec, 0xff00, 0x6800);
+	r8168g_phy_param(phydev, 0x80ed, 0xff00, 0x7c00);
+	r8168g_phy_param(phydev, 0x80f2, 0xff00, 0xf400);
+	r8168g_phy_param(phydev, 0x80f4, 0xff00, 0x8500);
+	r8168g_phy_param(phydev, 0x8110, 0xff00, 0xa800);
+	r8168g_phy_param(phydev, 0x810f, 0xff00, 0x1d00);
+	r8168g_phy_param(phydev, 0x8111, 0xff00, 0xf500);
+	r8168g_phy_param(phydev, 0x8113, 0xff00, 0x6100);
+	r8168g_phy_param(phydev, 0x8115, 0xff00, 0x9200);
+	r8168g_phy_param(phydev, 0x810e, 0xff00, 0x0400);
+	r8168g_phy_param(phydev, 0x810c, 0xff00, 0x7c00);
+	r8168g_phy_param(phydev, 0x810b, 0xff00, 0x5a00);
+	r8168g_phy_param(phydev, 0x80d1, 0xff00, 0xff00);
+	r8168g_phy_param(phydev, 0x80cd, 0xff00, 0x9e00);
+	r8168g_phy_param(phydev, 0x80d3, 0xff00, 0x0e00);
+	r8168g_phy_param(phydev, 0x80d5, 0xff00, 0xca00);
+	r8168g_phy_param(phydev, 0x80d7, 0xff00, 0x8400);
 
 	/* Force PWM-mode */
 	rtl_writephy(tp, 0x1f, 0x0bcd);
@@ -3651,38 +3584,22 @@ static void rtl8125_1_hw_phy_config(struct rtl8169_private *tp)
 	phy_modify_paged(phydev, 0xad1, 0x15, 0x0000, 0x03ff);
 	phy_modify_paged(phydev, 0xad1, 0x16, 0x0000, 0x03ff);
 
-	phy_write(phydev, 0x1f, 0x0a43);
-	phy_write(phydev, 0x13, 0x80ea);
-	phy_modify(phydev, 0x14, 0xff00, 0xc400);
-	phy_write(phydev, 0x13, 0x80eb);
-	phy_modify(phydev, 0x14, 0x0700, 0x0300);
-	phy_write(phydev, 0x13, 0x80f8);
-	phy_modify(phydev, 0x14, 0xff00, 0x1c00);
-	phy_write(phydev, 0x13, 0x80f1);
-	phy_modify(phydev, 0x14, 0xff00, 0x3000);
-	phy_write(phydev, 0x13, 0x80fe);
-	phy_modify(phydev, 0x14, 0xff00, 0xa500);
-	phy_write(phydev, 0x13, 0x8102);
-	phy_modify(phydev, 0x14, 0xff00, 0x5000);
-	phy_write(phydev, 0x13, 0x8105);
-	phy_modify(phydev, 0x14, 0xff00, 0x3300);
-	phy_write(phydev, 0x13, 0x8100);
-	phy_modify(phydev, 0x14, 0xff00, 0x7000);
-	phy_write(phydev, 0x13, 0x8104);
-	phy_modify(phydev, 0x14, 0xff00, 0xf000);
-	phy_write(phydev, 0x13, 0x8106);
-	phy_modify(phydev, 0x14, 0xff00, 0x6500);
-	phy_write(phydev, 0x13, 0x80dc);
-	phy_modify(phydev, 0x14, 0xff00, 0xed00);
-	phy_write(phydev, 0x13, 0x80df);
-	phy_set_bits(phydev, 0x14, BIT(8));
-	phy_write(phydev, 0x13, 0x80e1);
-	phy_clear_bits(phydev, 0x14, BIT(8));
-	phy_write(phydev, 0x1f, 0x0000);
+	r8168g_phy_param(phydev, 0x80ea, 0xff00, 0xc400);
+	r8168g_phy_param(phydev, 0x80eb, 0x0700, 0x0300);
+	r8168g_phy_param(phydev, 0x80f8, 0xff00, 0x1c00);
+	r8168g_phy_param(phydev, 0x80f1, 0xff00, 0x3000);
+	r8168g_phy_param(phydev, 0x80fe, 0xff00, 0xa500);
+	r8168g_phy_param(phydev, 0x8102, 0xff00, 0x5000);
+	r8168g_phy_param(phydev, 0x8105, 0xff00, 0x3300);
+	r8168g_phy_param(phydev, 0x8100, 0xff00, 0x7000);
+	r8168g_phy_param(phydev, 0x8104, 0xff00, 0xf000);
+	r8168g_phy_param(phydev, 0x8106, 0xff00, 0x6500);
+	r8168g_phy_param(phydev, 0x80dc, 0xff00, 0xed00);
+	r8168g_phy_param(phydev, 0x80df, 0x0000, 0x0100);
+	r8168g_phy_param(phydev, 0x80e1, 0x0100, 0x0000);
 
 	phy_modify_paged(phydev, 0xbf0, 0x13, 0x003f, 0x0038);
-	phy_write_paged(phydev, 0xa43, 0x13, 0x819f);
-	phy_write_paged(phydev, 0xa43, 0x14, 0xd0b6);
+	r8168g_phy_param(phydev, 0x819f, 0xffff, 0xd0b6);
 
 	phy_write_paged(phydev, 0xbc3, 0x12, 0x5555);
 	phy_modify_paged(phydev, 0xbf0, 0x15, 0x0e00, 0x0a00);
@@ -3737,22 +3654,16 @@ static void rtl8125_2_hw_phy_config(struct rtl8169_private *tp)
 	phy_write(phydev, 0x14, 0x0002);
 	for (i = 0; i < 25; i++)
 		phy_write(phydev, 0x14, 0x0000);
-
-	phy_write(phydev, 0x13, 0x8257);
-	phy_write(phydev, 0x14, 0x020F);
-
-	phy_write(phydev, 0x13, 0x80EA);
-	phy_write(phydev, 0x14, 0x7843);
 	phy_write(phydev, 0x1f, 0x0000);
 
+	r8168g_phy_param(phydev, 0x8257, 0xffff, 0x020F);
+	r8168g_phy_param(phydev, 0x80ea, 0xffff, 0x7843);
+
 	rtl_apply_firmware(tp);
 
 	phy_modify_paged(phydev, 0xd06, 0x14, 0x0000, 0x2000);
 
-	phy_write(phydev, 0x1f, 0x0a43);
-	phy_write(phydev, 0x13, 0x81a2);
-	phy_set_bits(phydev, 0x14, BIT(8));
-	phy_write(phydev, 0x1f, 0x0000);
+	r8168g_phy_param(phydev, 0x81a2, 0x0000, 0x0100);
 
 	phy_modify_paged(phydev, 0xb54, 0x16, 0xff00, 0xdb00);
 	phy_modify_paged(phydev, 0xa45, 0x12, 0x0001, 0x0000);
-- 
2.24.0


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ