| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20191109151525.18651-7-grygorii.strashko@ti.com>
Date: Sat, 9 Nov 2019 17:15:18 +0200
From: Grygorii Strashko <grygorii.strashko@...com>
To: Florian Fainelli <f.fainelli@...il.com>, <netdev@...r.kernel.org>,
Ilias Apalodimas <ilias.apalodimas@...aro.org>,
Andrew Lunn <andrew@...n.ch>,
"David S . Miller" <davem@...emloft.net>,
Ivan Khoronzhuk <ivan.khoronzhuk@...aro.org>,
Jiri Pirko <jiri@...nulli.us>
CC: Sekhar Nori <nsekhar@...com>, <linux-kernel@...r.kernel.org>,
<linux-omap@...r.kernel.org>,
Murali Karicheri <m-karicheri2@...com>,
Ivan Vecera <ivecera@...hat.com>,
Rob Herring <robh+dt@...nel.org>, <devicetree@...r.kernel.org>,
Grygorii Strashko <grygorii.strashko@...com>
Subject: [PATCH v6 net-next 06/13] dt-bindings: net: ti: add new cpsw switch driver bindings
Add bindings for the new TI CPSW switch driver. Comparing to the legacy
bindings (net/cpsw.txt):
- ports definition follows DSA bindings (net/dsa/dsa.txt) and ports can be
marked as "disabled" if not physically wired.
- all deprecated properties dropped;
- all legacy propertiies dropped which represent constant HW cpapbilities
(cpdma_channels, ale_entries, bd_ram_size, mac_control, slaves,
active_slave)
- TI CPTS DT properties are reused as is, but grouped in "cpts" sub-node
- TI Davinci MDIO DT bindings are reused as is, because Davinci MDIO is
reused.
Signed-off-by: Grygorii Strashko <grygorii.strashko@...com>
---
.../bindings/net/ti,cpsw-switch.yaml | 245 ++++++++++++++++++
1 file changed, 245 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
new file mode 100644
index 000000000000..afeb6a4f1ada
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
@@ -0,0 +1,245 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ti,cpsw-switch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI SoC Ethernet Switch Controller (CPSW) Device Tree Bindings
+
+maintainers:
+ - Grygorii Strashko <grygorii.strashko@...com>
+ - Sekhar Nori <nsekhar@...com>
+
+description:
+ The 3-port switch gigabit ethernet subsystem provides ethernet packet
+ communication and can be configured as an ethernet switch. It provides the
+ gigabit media independent interface (GMII),reduced gigabit media
+ independent interface (RGMII), reduced media independent interface (RMII),
+ the management data input output (MDIO) for physical layer device (PHY)
+ management.
+
+properties:
+ compatible:
+ oneOf:
+ - const: ti,cpsw-switch
+ - items:
+ - const: ti,am335x-cpsw-switch
+ - const: ti,cpsw-switch
+ - items:
+ - const: ti,am4372-cpsw-switch
+ - const: ti,cpsw-switch
+ - items:
+ - const: ti,dra7-cpsw-switch
+ - const: ti,cpsw-switch
+
+ reg:
+ maxItems: 1
+ description:
+ The physical base address and size of full the CPSW module IO range
+
+ ranges: true
+
+ clocks:
+ maxItems: 1
+ description: CPSW functional clock
+
+ clock-names:
+ maxItems: 1
+ items:
+ - const: fck
+
+ interrupts:
+ maxItems: 4
+ items:
+ - description: RX_THRESH interrupt
+ - description: RX interrupt
+ - description: TX interrupt
+ - description: MISC interrupt
+
+ interrupt-names:
+ maxItems: 4
+ items:
+ - const: "rx_thresh"
+ - const: "rx"
+ - const: "tx"
+ - const: "misc"
+
+ pinctrl-names: true
+
+ syscon:
+ $ref: /schemas/types.yaml#definitions/phandle
+ maxItems: 1
+ description:
+ Phandle to the system control device node which provides access to
+ efuse IO range with MAC addresses
+
+
+ ethernet-ports:
+ type: object
+ properties:
+ '#address-cells':
+ const: 1
+ '#size-cells':
+ const: 0
+
+ patternProperties:
+ "^port@[0-9]+$":
+ type: object
+ minItems: 1
+ maxItems: 2
+ description: CPSW external ports
+
+ allOf:
+ - $ref: ethernet-controller.yaml#
+
+ properties:
+ reg:
+ maxItems: 1
+ enum: [1, 2]
+ description: CPSW port number
+
+ phys:
+ $ref: /schemas/types.yaml#definitions/phandle-array
+ maxItems: 1
+ description: phandle on phy-gmii-sel PHY
+
+ label:
+ $ref: /schemas/types.yaml#/definitions/string-array
+ maxItems: 1
+ description: label associated with this port
+
+ ti,dual-emac-pvid:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maxItems: 1
+ minimum: 1
+ maximum: 1024
+ description:
+ Specifies default PORT VID to be used to segregate
+ ports. Default value - CPSW port number.
+
+ required:
+ - reg
+ - phys
+
+ mdio:
+ type: object
+ allOf:
+ - $ref: "ti,davinci-mdio.yaml#"
+ description:
+ CPSW MDIO bus.
+
+ cpts:
+ type: object
+ description:
+ The Common Platform Time Sync (CPTS) module
+
+ properties:
+ clocks:
+ maxItems: 1
+ description: CPTS reference clock
+
+ clock-names:
+ maxItems: 1
+ items:
+ - const: cpts
+
+ cpts_clock_mult:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maxItems: 1
+ description:
+ Numerator to convert input clock ticks into ns
+
+ cpts_clock_shift:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maxItems: 1
+ description:
+ Denominator to convert input clock ticks into ns.
+ Mult and shift will be calculated basing on CPTS rftclk frequency if
+ both cpts_clock_shift and cpts_clock_mult properties are not provided.
+
+ required:
+ - clocks
+ - clock-names
+
+required:
+ - compatible
+ - reg
+ - ranges
+ - clocks
+ - clock-names
+ - interrupts
+ - interrupt-names
+ - '#address-cells'
+ - '#size-cells'
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/dra7.h>
+
+ mac_sw: switch@0 {
+ compatible = "ti,dra7-cpsw-switch","ti,cpsw-switch";
+ reg = <0x0 0x4000>;
+ ranges = <0 0 0x4000>;
+ clocks = <&gmac_main_clk>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ syscon = <&scm_conf>;
+ inctrl-names = "default", "sleep";
+
+ interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "rx_thresh", "rx", "tx", "misc";
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpsw_port1: port@1 {
+ reg = <1>;
+ label = "port1";
+ mac-address = [ 00 00 00 00 00 00 ];
+ phys = <&phy_gmii_sel 1>;
+ phy-handle = <ðphy0_sw>;
+ phy-mode = "rgmii";
+ ti,dual_emac_pvid = <1>;
+ };
+
+ cpsw_port2: port@2 {
+ reg = <2>;
+ label = "wan";
+ mac-address = [ 00 00 00 00 00 00 ];
+ phys = <&phy_gmii_sel 2>;
+ phy-handle = <ðphy1_sw>;
+ phy-mode = "rgmii";
+ ti,dual_emac_pvid = <2>;
+ };
+ };
+
+ davinci_mdio_sw: mdio@...0 {
+ compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+ reg = <0x1000 0x100>;
+ clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus_freq = <1000000>;
+
+ ethphy0_sw: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1_sw: ethernet-phy@1 {
+ reg = <41>;
+ };
+ };
+
+ cpts {
+ clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 25>;
+ clock-names = "cpts";
+ };
+ };
--
2.17.1
Powered by blists - more mailing lists