netdev - Re: [PATCH] NFC: nxp-nci: Fix NULL pointer dereference after I2C communication error

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20191111084343.GM32742@smile.fi.intel.com>
Date:   Mon, 11 Nov 2019 10:43:43 +0200
From:   Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
To:     Stephan Gerhold <stephan@...hold.net>
Cc:     "David S. Miller" <davem@...emloft.net>,
        Clément Perrochaud 
        <clement.perrochaud@...innov.com>,
        Charles Gorand <charles.gorand@...innov.com>,
        linux-nfc@...ts.01.org, netdev@...r.kernel.org,
        linux-kernel@...r.kernel.org, Sedat Dilek <sedat.dilek@...dativ.de>
Subject: Re: [PATCH] NFC: nxp-nci: Fix NULL pointer dereference after I2C
 communication error

On Sun, Nov 10, 2019 at 05:19:15PM +0100, Stephan Gerhold wrote:
> I2C communication errors (-EREMOTEIO) during the IRQ handler of nxp-nci
> result in a NULL pointer dereference at the moment:
> 
>     BUG: kernel NULL pointer dereference, address: 0000000000000000
>     Oops: 0002 [#1] PREEMPT SMP NOPTI
>     CPU: 1 PID: 355 Comm: irq/137-nxp-nci Not tainted 5.4.0-rc6 #1
>     RIP: 0010:skb_queue_tail+0x25/0x50
>     Call Trace:
>      nci_recv_frame+0x36/0x90 [nci]
>      nxp_nci_i2c_irq_thread_fn+0xd1/0x285 [nxp_nci_i2c]
>      ? preempt_count_add+0x68/0xa0
>      ? irq_forced_thread_fn+0x80/0x80
>      irq_thread_fn+0x20/0x60
>      irq_thread+0xee/0x180
>      ? wake_threads_waitq+0x30/0x30
>      kthread+0xfb/0x130
>      ? irq_thread_check_affinity+0xd0/0xd0
>      ? kthread_park+0x90/0x90
>      ret_from_fork+0x1f/0x40
> 
> Afterward the kernel must be rebooted to work properly again.
> 
> This happens because it attempts to call nci_recv_frame() with skb == NULL.
> However, unlike nxp_nci_fw_recv_frame(), nci_recv_frame() does not have any
> NULL checks for skb, causing the NULL pointer dereference.
> 
> Change the code to call only nxp_nci_fw_recv_frame() in case of an error.
> Make sure to log it so it is obvious that a communication error occurred.
> The error above then becomes:
> 
>     nxp-nci_i2c i2c-NXP1001:00: NFC: Read failed with error -121
>     nci: __nci_request: wait_for_completion_interruptible_timeout failed 0
>     nxp-nci_i2c i2c-NXP1001:00: NFC: Read failed with error -121
> 

FWIW,
Reviewed-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>

> Fixes: 6be88670fc59 ("NFC: nxp-nci_i2c: Add I2C support to NXP NCI driver")
> Signed-off-by: Stephan Gerhold <stephan@...hold.net>
> ---
> Note: Not sure why NFC is broken on this laptop (a Lenovo ThinkPad L490).
> It runs into the I2C communication errors immediately when enabling NFC.
> This patch fixes the NULL pointer dereference at least.
> ---
>  drivers/nfc/nxp-nci/i2c.c | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/nfc/nxp-nci/i2c.c b/drivers/nfc/nxp-nci/i2c.c
> index 307bd2afbe05..4d1909aecd6c 100644
> --- a/drivers/nfc/nxp-nci/i2c.c
> +++ b/drivers/nfc/nxp-nci/i2c.c
> @@ -220,8 +220,10 @@ static irqreturn_t nxp_nci_i2c_irq_thread_fn(int irq, void *phy_id)
>  
>  	if (r == -EREMOTEIO) {
>  		phy->hard_fault = r;
> -		skb = NULL;
> -	} else if (r < 0) {
> +		if (info->mode == NXP_NCI_MODE_FW)
> +			nxp_nci_fw_recv_frame(phy->ndev, NULL);
> +	}
> +	if (r < 0) {
>  		nfc_err(&client->dev, "Read failed with error %d\n", r);
>  		goto exit_irq_handled;
>  	}
> -- 
> 2.23.0
> 

-- 
With Best Regards,
Andy Shevchenko