| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <0d53fe03-50a4-8a96-5605-7f20bd3c17fa@pengutronix.de>
Date: Tue, 12 Nov 2019 16:57:50 +0100
From: Marc Kleine-Budde <mkl@...gutronix.de>
To: netdev@...r.kernel.org
Cc: davem@...emloft.net, kernel@...gutronix.de,
linux-can@...r.kernel.org,
Oliver Hartkopp <socketcan@...tkopp.net>,
Bastian Stender <bst@...gutronix.de>,
Elenita Hinds <ecathinds@...il.com>,
Kurt Van Dijck <dev.kurt@...dijck-laurijssen.be>,
Maxime Jayat <maxime.jayat@...ile-devices.fr>,
Robin van der Gracht <robin@...tonic.nl>,
Oleksij Rempel <ore@...gutronix.de>,
David Jander <david@...tonic.nl>
Subject: pull-request: can-next 2019-10-07
Hello David,
this is a pull request for net-next/master consisting of 32 patches.
The first patch is by Gustavo A. R. Silva and removes unused code in the
generic CAN infrastructure.
The next three patches target the mcp251x driver. The one by Andy
Shevchenko removes the legacy platform data support from the driver. The
other two are by Timo Schlüßler and reset the device only when needed,
to prevent glitches on the output when GPIO support is added.
I'm contributing two patches fixing checkpatch warnings in the
c_can_platform and peak_canfd driver.
Stephane Grosjean's patch for the peak_canfd driver adds hw timestamps
support in rx skbs.
The next three patches target the xilinx_can driver. One patch by me to
fix checkpatch warnings, one patch by Anssi Hannula to avoid non
requested bus error frames, and a patch by YueHaibing that switches the
driver to devm_platform_ioremap_resource().
Pankaj Sharma contributes two patches for the m_can driver, the first
one adds support for one shot mode, the other support for handling
arbitration errors.
Followed by four patches by YueHaibing, switching the grcan, ifi, rcar,
and sun4i drivers to devm_platform_ioremap_resource()
I'm contributing cleanup patches for the rx-offload helper, while Joakim
Zhang's patch prepares the rx-offload helper for CAN-FD support. The rx
offload users flexcan and ti_hecc are converted accordingly.
The remaining twelve patches target the flexcan driver. First Joakim
Zhang switches the driver to devm_platform_ioremap_resource(). The
remaining eleven patch are by me and clean up the abstract the access of
the iflag1 and iflag2 register both for RX and TX mailboxes. This is a
preparation for the upcoming CAN-FD support.
regards,
Marc
---
The following changes since commit 228200179213bfc9b4d6097e1c26de30bd18c1e6:
Support LAN743x PTP periodic output on any GPIO (2019-11-11 12:46:56 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git tags/linux-can-next-for-5.5-20191111
for you to fetch changes up to b9468ad8ff65e6dcfeb69cab15deecafdb883643:
can: flexcan: flexcan_mailbox_read() make use of flexcan_write64() to mark the mailbox as read (2019-11-11 21:58:12 +0100)
----------------------------------------------------------------
linux-can-next-for-5.5-20191111
----------------------------------------------------------------
Andy Shevchenko (1):
can: mcp251x: get rid of legacy platform data
Anssi Hannula (1):
can: xilinx_can: avoid non-requested bus error frames
Gustavo A. R. Silva (1):
can: dev: can_restart(): remove unused code
Joakim Zhang (2):
can: rx-offload: Prepare for CAN FD support
can: flexcan: use devm_platform_ioremap_resource() to simplify code
Marc Kleine-Budde (17):
can: c_can: c_can_plaform: fix checkpatch warnings
can: peak_canfd: fix checkpatch warnings
can: xilinx_can: fix checkpatch warnings
can: rx-offload: fix long lines
can: rx-offload: can_rx_offload_compare(): fix typo
can: rx-offload: can_rx_offload_irq_offload_timestamp(): don't use assignment in if condition
can: rx-offload: can_rx_offload_reset(): remove no-op function
can: flexcan: flexcan_irq_state(): only read timestamp if needed
can: flexcan: rename macro FLEXCAN_IFLAG_MB() -> FLEXCAN_IFLAG2_MB()
can: flexcan: flexcan_irq(): rename variable reg_iflag -> reg_iflag_rx
can: flexcan: rename struct flexcan_priv::reg_imask{1,2}_default to rx_mask{1,2}
can: flexcan: remove TX mailbox bit from struct flexcan_priv::rx_mask{1,2}
can: flexcan: convert struct flexcan_priv::rx_mask{1,2} to rx_mask
can: flexcan: introduce struct flexcan_priv::tx_mask and make use of it
can: flexcan: flexcan_read_reg_iflag_rx(): optimize reading
can: flexcan: flexcan_irq(): add support for TX mailbox in iflag1
can: flexcan: flexcan_mailbox_read() make use of flexcan_write64() to mark the mailbox as read
Pankaj Sharma (2):
can: m_can: add support for one shot mode
can: m_can: add support for handling arbitration error
Stephane Grosjean (1):
can: peak_canfd: provide hw timestamps in rx skbs
Timo Schlüßler (2):
can: mcp251x: add mcp251x_write_2regs() and make use of it
can: mcp251x: only reset hardware as required
YueHaibing (5):
can: xilinx_can: use devm_platform_ioremap_resource() to simplify code
can: grcan: use devm_platform_ioremap_resource() to simplify code
can: ifi: use devm_platform_ioremap_resource() to simplify code
can: rcar: use devm_platform_ioremap_resource() to simplify code
can: sun4i: use devm_platform_ioremap_resource() to simplify code
arch/arm/mach-pxa/icontrol.c | 9 +-
arch/arm/mach-pxa/zeus.c | 9 +-
drivers/net/can/c_can/c_can_platform.c | 21 +++--
drivers/net/can/dev.c | 5 +-
drivers/net/can/flexcan.c | 131 +++++++++++++++-----------
drivers/net/can/grcan.c | 4 +-
drivers/net/can/ifi_canfd/ifi_canfd.c | 4 +-
drivers/net/can/m_can/m_can.c | 54 ++++++++++-
drivers/net/can/peak_canfd/peak_canfd.c | 25 +++--
drivers/net/can/peak_canfd/peak_canfd_user.h | 3 +-
drivers/net/can/peak_canfd/peak_pciefd_main.c | 6 +-
drivers/net/can/rcar/rcar_can.c | 4 +-
drivers/net/can/rcar/rcar_canfd.c | 4 +-
drivers/net/can/rx-offload.c | 122 +++++++++---------------
drivers/net/can/spi/mcp251x.c | 75 ++++++++++++---
drivers/net/can/sun4i_can.c | 4 +-
drivers/net/can/ti_hecc.c | 26 +++--
drivers/net/can/xilinx_can.c | 102 ++++++++++----------
include/linux/can/platform/mcp251x.h | 22 -----
include/linux/can/rx-offload.h | 7 +-
20 files changed, 360 insertions(+), 277 deletions(-)
delete mode 100644 include/linux/can/platform/mcp251x.h
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |-
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
Download attachment "signature.asc" of type "application/pgp-signature" (489 bytes)
Powered by blists - more mailing lists