| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20191112212200.5572-1-olteanv@gmail.com>
Date: Tue, 12 Nov 2019 23:22:00 +0200
From: Vladimir Oltean <olteanv@...il.com>
To: andrew@...n.ch, f.fainelli@...il.com, vivien.didelot@...il.com,
davem@...emloft.net
Cc: netdev@...r.kernel.org, Vladimir Oltean <olteanv@...il.com>
Subject: [PATCH net-next] net: dsa: sja1105: Print the reset reason
Sometimes it can be quite opaque even for me why the driver decided to
reset the switch. So instead of adding dump_stack() calls each time for
debugging, just add a reset reason to sja1105_static_config_reload
calls which gets printed to the console.
Signed-off-by: Vladimir Oltean <olteanv@...il.com>
---
drivers/net/dsa/sja1105/sja1105.h | 10 +++++++++-
drivers/net/dsa/sja1105/sja1105_main.c | 18 +++++++++++++++---
drivers/net/dsa/sja1105/sja1105_ptp.c | 2 +-
drivers/net/dsa/sja1105/sja1105_tas.c | 4 ++--
4 files changed, 27 insertions(+), 7 deletions(-)
diff --git a/drivers/net/dsa/sja1105/sja1105.h b/drivers/net/dsa/sja1105/sja1105.h
index 64b3ee7b9771..1a3722971b61 100644
--- a/drivers/net/dsa/sja1105/sja1105.h
+++ b/drivers/net/dsa/sja1105/sja1105.h
@@ -115,7 +115,15 @@ typedef enum {
} sja1105_spi_rw_mode_t;
/* From sja1105_main.c */
-int sja1105_static_config_reload(struct sja1105_private *priv);
+enum sja1105_reset_reason {
+ SJA1105_VLAN_FILTERING = 0,
+ SJA1105_RX_HWTSTAMPING,
+ SJA1105_AGEING_TIME,
+ SJA1105_SCHEDULING,
+};
+
+int sja1105_static_config_reload(struct sja1105_private *priv,
+ enum sja1105_reset_reason reason);
/* From sja1105_spi.c */
int sja1105_xfer_buf(const struct sja1105_private *priv,
diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c
index 475cc2d8b0e8..b60224c55244 100644
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -1341,13 +1341,21 @@ static void sja1105_bridge_leave(struct dsa_switch *ds, int port,
sja1105_bridge_member(ds, port, br, false);
}
+static const char * const sja1105_reset_reasons[] = {
+ [SJA1105_VLAN_FILTERING] = "VLAN filtering",
+ [SJA1105_RX_HWTSTAMPING] = "RX timestamping",
+ [SJA1105_AGEING_TIME] = "Ageing time",
+ [SJA1105_SCHEDULING] = "Time-aware scheduling",
+};
+
/* For situations where we need to change a setting at runtime that is only
* available through the static configuration, resetting the switch in order
* to upload the new static config is unavoidable. Back up the settings we
* modify at runtime (currently only MAC) and restore them after uploading,
* such that this operation is relatively seamless.
*/
-int sja1105_static_config_reload(struct sja1105_private *priv)
+int sja1105_static_config_reload(struct sja1105_private *priv,
+ enum sja1105_reset_reason reason)
{
struct ptp_system_timestamp ptp_sts_before;
struct ptp_system_timestamp ptp_sts_after;
@@ -1405,6 +1413,10 @@ int sja1105_static_config_reload(struct sja1105_private *priv)
out_unlock_ptp:
mutex_unlock(&priv->ptp_data.lock);
+ dev_info(priv->ds->dev,
+ "Reset switch and programmed static config. Reason: %s\n",
+ sja1105_reset_reasons[reason]);
+
/* Configure the CGU (PLLs) for MII and RMII PHYs.
* For these interfaces there is no dynamic configuration
* needed, since PLLs have same settings at all speeds.
@@ -1599,7 +1611,7 @@ static int sja1105_vlan_filtering(struct dsa_switch *ds, int port, bool enabled)
l2_lookup_params = table->entries;
l2_lookup_params->shared_learn = !enabled;
- rc = sja1105_static_config_reload(priv);
+ rc = sja1105_static_config_reload(priv, SJA1105_VLAN_FILTERING);
if (rc)
dev_err(ds->dev, "Failed to change VLAN Ethertype\n");
@@ -1871,7 +1883,7 @@ static int sja1105_set_ageing_time(struct dsa_switch *ds,
l2_lookup_params->maxage = maxage;
- return sja1105_static_config_reload(priv);
+ return sja1105_static_config_reload(priv, SJA1105_AGEING_TIME);
}
static int sja1105_port_setup_tc(struct dsa_switch *ds, int port,
diff --git a/drivers/net/dsa/sja1105/sja1105_ptp.c b/drivers/net/dsa/sja1105/sja1105_ptp.c
index 0a35813f9328..6b9b2bef8a7b 100644
--- a/drivers/net/dsa/sja1105/sja1105_ptp.c
+++ b/drivers/net/dsa/sja1105/sja1105_ptp.c
@@ -102,7 +102,7 @@ static int sja1105_change_rxtstamping(struct sja1105_private *priv,
priv->tagger_data.stampable_skb = NULL;
}
- return sja1105_static_config_reload(priv);
+ return sja1105_static_config_reload(priv, SJA1105_RX_HWTSTAMPING);
}
int sja1105_hwtstamp_set(struct dsa_switch *ds, int port, struct ifreq *ifr)
diff --git a/drivers/net/dsa/sja1105/sja1105_tas.c b/drivers/net/dsa/sja1105/sja1105_tas.c
index 33eca6a82ec5..d846fb5c4e4d 100644
--- a/drivers/net/dsa/sja1105/sja1105_tas.c
+++ b/drivers/net/dsa/sja1105/sja1105_tas.c
@@ -352,7 +352,7 @@ int sja1105_setup_tc_taprio(struct dsa_switch *ds, int port,
if (rc < 0)
return rc;
- return sja1105_static_config_reload(priv);
+ return sja1105_static_config_reload(priv, SJA1105_SCHEDULING);
}
/* The cycle time extension is the amount of time the last cycle from
@@ -400,7 +400,7 @@ int sja1105_setup_tc_taprio(struct dsa_switch *ds, int port,
if (rc < 0)
return rc;
- return sja1105_static_config_reload(priv);
+ return sja1105_static_config_reload(priv, SJA1105_SCHEDULING);
}
void sja1105_tas_setup(struct dsa_switch *ds)
--
2.17.1
Powered by blists - more mailing lists