| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <6ada4c1c9d35eeb5f4ecfab94593dafa6b5c4b09.1574452833.git.daniel@iogearbox.net>
Date: Fri, 22 Nov 2019 21:08:00 +0100
From: Daniel Borkmann <daniel@...earbox.net>
To: ast@...nel.org
Cc: john.fastabend@...il.com, andrii.nakryiko@...il.com,
netdev@...r.kernel.org, bpf@...r.kernel.org,
Daniel Borkmann <daniel@...earbox.net>
Subject: [PATCH bpf-next v2 7/8] bpf, x86: emit patchable direct jump as tail call
Add initial code emission for *direct* jumps for tail call maps in
order to avoid the retpoline overhead from a493a87f38cf ("bpf, x64:
implement retpoline for tail call") for situations that allow for
it, meaning, for known constant keys at verification time which are
used as index into the tail call map. In case of Cilium which makes
heavy use of tail calls, constant keys are used in the vast majority,
only for a single occurrence we use a dynamic key.
High level outline is that if the target prog is NULL in the map, we
emit a 5-byte nop for the fall-through case and if not, we emit a
5-byte direct relative jmp to the target bpf_func + skipped prologue
offset. Later during runtime, we patch these 5-byte nop/jmps upon
tail call map update or deletions dynamically. Note that on x86-64
the direct jmp works as we reuse the same stack frame and skip
prologue (as opposed to some other JIT implementations).
One of the issues is that the tail call map slots can change at any
given time even during JITing. Therefore, we have two passes: i) emit
nops for all patchable locations during main JITing phase until we
declare prog->jited = 1 eventually. At this point the image is stable,
not public yet and with all jmps disabled. While JITing, we collect
additional info like poke->ip in order to remember the patch location
for later modifications. In ii) bpf_tail_call_direct_fixup() walks
over the progs poke_tab, locks the tail call maps poke_mutex to
prevent from parallel updates and patches in the right locations via
__bpf_arch_text_poke(). Note, the main bpf_arch_text_poke() cannot
be used at this point since we're not yet exposed to kallsyms. For
the update we use plain memcpy() since the image is not public and
still in read-write mode. After patching, we activate that poke entry
through poke->ip_stable. Meaning, at this point any tail call map
updates/deletions are not going to ignore that poke entry anymore.
Then, bpf_arch_text_poke() might still occur on the read-write image
until we finally locked it as read-only. Both modifications on the
given image are under text_mutex to avoid interference with each
other when update requests come in in parallel for different tail
call maps (current one we have locked in JIT and different one where
poke->ip_stable was already set).
Example prog:
# ./bpftool p d x i 1655
0: (b7) r3 = 0
1: (18) r2 = map[id:526]
3: (85) call bpf_tail_call#12
4: (b7) r0 = 1
5: (95) exit
Before:
# ./bpftool p d j i 1655
0xffffffffc076e55c:
0: nopl 0x0(%rax,%rax,1)
5: push %rbp
6: mov %rsp,%rbp
9: sub $0x200,%rsp
10: push %rbx
11: push %r13
13: push %r14
15: push %r15
17: pushq $0x0 _
19: xor %edx,%edx |_ index (arg 3)
1b: movabs $0xffff88d95cc82600,%rsi |_ map (arg 2)
25: mov %edx,%edx | index >= array->map.max_entries
27: cmp %edx,0x24(%rsi) |
2a: jbe 0x0000000000000066 |_
2c: mov -0x224(%rbp),%eax | tail call limit check
32: cmp $0x20,%eax |
35: ja 0x0000000000000066 |
37: add $0x1,%eax |
3a: mov %eax,-0x224(%rbp) |_
40: mov 0xd0(%rsi,%rdx,8),%rax |_ prog = array->ptrs[index]
48: test %rax,%rax | prog == NULL check
4b: je 0x0000000000000066 |_
4d: mov 0x30(%rax),%rax | goto *(prog->bpf_func + prologue_size)
51: add $0x19,%rax |
55: callq 0x0000000000000061 | retpoline for indirect jump
5a: pause |
5c: lfence |
5f: jmp 0x000000000000005a |
61: mov %rax,(%rsp) |
65: retq |_
66: mov $0x1,%eax
6b: pop %rbx
6c: pop %r15
6e: pop %r14
70: pop %r13
72: pop %rbx
73: leaveq
74: retq
After; state after JIT:
# ./bpftool p d j i 1655
0xffffffffc08e8930:
0: nopl 0x0(%rax,%rax,1)
5: push %rbp
6: mov %rsp,%rbp
9: sub $0x200,%rsp
10: push %rbx
11: push %r13
13: push %r14
15: push %r15
17: pushq $0x0 _
19: xor %edx,%edx |_ index (arg 3)
1b: movabs $0xffff9d8afd74c000,%rsi |_ map (arg 2)
25: mov -0x224(%rbp),%eax | tail call limit check
2b: cmp $0x20,%eax |
2e: ja 0x000000000000003e |
30: add $0x1,%eax |
33: mov %eax,-0x224(%rbp) |_
39: jmpq 0xfffffffffffd1785 |_ [direct] goto *(prog->bpf_func + prologue_size)
3e: mov $0x1,%eax
43: pop %rbx
44: pop %r15
46: pop %r14
48: pop %r13
4a: pop %rbx
4b: leaveq
4c: retq
After; state after map update (target prog):
# ./bpftool p d j i 1655
0xffffffffc08e8930:
0: nopl 0x0(%rax,%rax,1)
5: push %rbp
6: mov %rsp,%rbp
9: sub $0x200,%rsp
10: push %rbx
11: push %r13
13: push %r14
15: push %r15
17: pushq $0x0
19: xor %edx,%edx
1b: movabs $0xffff9d8afd74c000,%rsi
25: mov -0x224(%rbp),%eax
2b: cmp $0x20,%eax .
2e: ja 0x000000000000003e .
30: add $0x1,%eax .
33: mov %eax,-0x224(%rbp) |_
39: jmpq 0xffffffffffb09f55 |_ goto *(prog->bpf_func + prologue_size)
3e: mov $0x1,%eax
43: pop %rbx
44: pop %r15
46: pop %r14
48: pop %r13
4a: pop %rbx
4b: leaveq
4c: retq
After; state after map update (no prog):
# ./bpftool p d j i 1655
0xffffffffc08e8930:
0: nopl 0x0(%rax,%rax,1)
5: push %rbp
6: mov %rsp,%rbp
9: sub $0x200,%rsp
10: push %rbx
11: push %r13
13: push %r14
15: push %r15
17: pushq $0x0
19: xor %edx,%edx
1b: movabs $0xffff9d8afd74c000,%rsi
25: mov -0x224(%rbp),%eax
2b: cmp $0x20,%eax .
2e: ja 0x000000000000003e .
30: add $0x1,%eax .
33: mov %eax,-0x224(%rbp) |_
39: nopl 0x0(%rax,%rax,1) |_ fall-through nop
3e: mov $0x1,%eax
43: pop %rbx
44: pop %r15
46: pop %r14
48: pop %r13
4a: pop %rbx
4b: leaveq
4c: retq
Nice bonus is that this also shrinks the code emission quite a bit
for every tail call invocation.
Signed-off-by: Daniel Borkmann <daniel@...earbox.net>
---
arch/x86/net/bpf_jit_comp.c | 282 ++++++++++++++++++++++++------------
1 file changed, 187 insertions(+), 95 deletions(-)
diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c
index f438bd3b7689..15615c94804f 100644
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -239,6 +239,123 @@ static void emit_prologue(u8 **pprog, u32 stack_depth, bool ebpf_from_cbpf)
*pprog = prog;
}
+static int emit_patch(u8 **pprog, void *func, void *ip, u8 opcode)
+{
+ u8 *prog = *pprog;
+ int cnt = 0;
+ s64 offset;
+
+ offset = func - (ip + X86_PATCH_SIZE);
+ if (!is_simm32(offset)) {
+ pr_err("Target call %p is out of range\n", func);
+ return -ERANGE;
+ }
+ EMIT1_off32(opcode, offset);
+ *pprog = prog;
+ return 0;
+}
+
+static int emit_call(u8 **pprog, void *func, void *ip)
+{
+ return emit_patch(pprog, func, ip, 0xE8);
+}
+
+static int emit_jump(u8 **pprog, void *func, void *ip)
+{
+ return emit_patch(pprog, func, ip, 0xE9);
+}
+
+static int __bpf_arch_text_poke(void *ip, enum bpf_text_poke_type t,
+ void *old_addr, void *new_addr,
+ const bool text_live)
+{
+ int (*emit_patch_fn)(u8 **pprog, void *func, void *ip);
+ const u8 *nop_insn = ideal_nops[NOP_ATOMIC5];
+ u8 old_insn[X86_PATCH_SIZE] = {};
+ u8 new_insn[X86_PATCH_SIZE] = {};
+ u8 *prog;
+ int ret;
+
+ switch (t) {
+ case BPF_MOD_NOP_TO_CALL ... BPF_MOD_CALL_TO_NOP:
+ emit_patch_fn = emit_call;
+ break;
+ case BPF_MOD_NOP_TO_JUMP ... BPF_MOD_JUMP_TO_NOP:
+ emit_patch_fn = emit_jump;
+ break;
+ default:
+ return -ENOTSUPP;
+ }
+
+ switch (t) {
+ case BPF_MOD_NOP_TO_CALL:
+ case BPF_MOD_NOP_TO_JUMP:
+ if (!old_addr && new_addr) {
+ memcpy(old_insn, nop_insn, X86_PATCH_SIZE);
+
+ prog = new_insn;
+ ret = emit_patch_fn(&prog, new_addr, ip);
+ if (ret)
+ return ret;
+ break;
+ }
+ return -ENXIO;
+ case BPF_MOD_CALL_TO_CALL:
+ case BPF_MOD_JUMP_TO_JUMP:
+ if (old_addr && new_addr) {
+ prog = old_insn;
+ ret = emit_patch_fn(&prog, old_addr, ip);
+ if (ret)
+ return ret;
+
+ prog = new_insn;
+ ret = emit_patch_fn(&prog, new_addr, ip);
+ if (ret)
+ return ret;
+ break;
+ }
+ return -ENXIO;
+ case BPF_MOD_CALL_TO_NOP:
+ case BPF_MOD_JUMP_TO_NOP:
+ if (old_addr && !new_addr) {
+ memcpy(new_insn, nop_insn, X86_PATCH_SIZE);
+
+ prog = old_insn;
+ ret = emit_patch_fn(&prog, old_addr, ip);
+ if (ret)
+ return ret;
+ break;
+ }
+ return -ENXIO;
+ default:
+ return -ENOTSUPP;
+ }
+
+ ret = -EBUSY;
+ mutex_lock(&text_mutex);
+ if (memcmp(ip, old_insn, X86_PATCH_SIZE))
+ goto out;
+ if (text_live)
+ text_poke_bp(ip, new_insn, X86_PATCH_SIZE, NULL);
+ else
+ memcpy(ip, new_insn, X86_PATCH_SIZE);
+ ret = 0;
+out:
+ mutex_unlock(&text_mutex);
+ return ret;
+}
+
+int bpf_arch_text_poke(void *ip, enum bpf_text_poke_type t,
+ void *old_addr, void *new_addr)
+{
+ if (!is_kernel_text((long)ip) &&
+ !is_bpf_text_address((long)ip))
+ /* BPF poking in modules is not supported */
+ return -EINVAL;
+
+ return __bpf_arch_text_poke(ip, t, old_addr, new_addr, true);
+}
+
/*
* Generate the following code:
*
@@ -253,7 +370,7 @@ static void emit_prologue(u8 **pprog, u32 stack_depth, bool ebpf_from_cbpf)
* goto *(prog->bpf_func + prologue_size);
* out:
*/
-static void emit_bpf_tail_call(u8 **pprog)
+static void emit_bpf_tail_call_indirect(u8 **pprog)
{
u8 *prog = *pprog;
int label1, label2, label3;
@@ -320,6 +437,69 @@ static void emit_bpf_tail_call(u8 **pprog)
*pprog = prog;
}
+static void emit_bpf_tail_call_direct(struct bpf_jit_poke_descriptor *poke,
+ u8 **pprog, int addr, u8 *image)
+{
+ u8 *prog = *pprog;
+ int cnt = 0;
+
+ /*
+ * if (tail_call_cnt > MAX_TAIL_CALL_CNT)
+ * goto out;
+ */
+ EMIT2_off32(0x8B, 0x85, -36 - MAX_BPF_STACK); /* mov eax, dword ptr [rbp - 548] */
+ EMIT3(0x83, 0xF8, MAX_TAIL_CALL_CNT); /* cmp eax, MAX_TAIL_CALL_CNT */
+ EMIT2(X86_JA, 14); /* ja out */
+ EMIT3(0x83, 0xC0, 0x01); /* add eax, 1 */
+ EMIT2_off32(0x89, 0x85, -36 - MAX_BPF_STACK); /* mov dword ptr [rbp -548], eax */
+
+ poke->ip = image + (addr - X86_PATCH_SIZE);
+ poke->adj_off = PROLOGUE_SIZE;
+
+ memcpy(prog, ideal_nops[NOP_ATOMIC5], X86_PATCH_SIZE);
+ prog += X86_PATCH_SIZE;
+ /* out: */
+
+ *pprog = prog;
+}
+
+static void bpf_tail_call_direct_fixup(struct bpf_prog *prog)
+{
+ static const enum bpf_text_poke_type type = BPF_MOD_NOP_TO_JUMP;
+ struct bpf_jit_poke_descriptor *poke;
+ struct bpf_array *array;
+ struct bpf_prog *target;
+ int i, ret;
+
+ for (i = 0; i < prog->aux->size_poke_tab; i++) {
+ poke = &prog->aux->poke_tab[i];
+ WARN_ON_ONCE(READ_ONCE(poke->ip_stable));
+
+ if (poke->reason != BPF_POKE_REASON_TAIL_CALL)
+ continue;
+
+ array = container_of(poke->tail_call.map, struct bpf_array, map);
+ mutex_lock(&array->aux->poke_mutex);
+ target = array->ptrs[poke->tail_call.key];
+ if (target) {
+ /* Plain memcpy is used when image is not live yet
+ * and still not locked as read-only. Once poke
+ * location is active (poke->ip_stable), any parallel
+ * bpf_arch_text_poke() might occur still on the
+ * read-write image until we finally locked it as
+ * read-only. Both modifications on the given image
+ * are under text_mutex to avoid interference.
+ */
+ ret = __bpf_arch_text_poke(poke->ip, type, NULL,
+ (u8 *)target->bpf_func +
+ poke->adj_off, false);
+ BUG_ON(ret < 0);
+ }
+ WRITE_ONCE(poke->ip_stable, true);
+ mutex_unlock(&array->aux->poke_mutex);
+ }
+}
+
static void emit_mov_imm32(u8 **pprog, bool sign_propagate,
u32 dst_reg, const u32 imm32)
{
@@ -481,99 +661,6 @@ static void emit_stx(u8 **pprog, u32 size, u32 dst_reg, u32 src_reg, int off)
*pprog = prog;
}
-static int emit_patch(u8 **pprog, void *func, void *ip, u8 opcode)
-{
- u8 *prog = *pprog;
- int cnt = 0;
- s64 offset;
-
- offset = func - (ip + X86_PATCH_SIZE);
- if (!is_simm32(offset)) {
- pr_err("Target call %p is out of range\n", func);
- return -EINVAL;
- }
- EMIT1_off32(opcode, offset);
- *pprog = prog;
- return 0;
-}
-
-static int emit_call(u8 **pprog, void *func, void *ip)
-{
- return emit_patch(pprog, func, ip, 0xE8);
-}
-
-static int emit_jump(u8 **pprog, void *func, void *ip)
-{
- return emit_patch(pprog, func, ip, 0xE9);
-}
-
-int bpf_arch_text_poke(void *ip, enum bpf_text_poke_type t,
- void *old_addr, void *new_addr)
-{
- int (*emit_patch_fn)(u8 **pprog, void *func, void *ip);
- u8 old_insn[X86_PATCH_SIZE] = {};
- u8 new_insn[X86_PATCH_SIZE] = {};
- u8 *prog;
- int ret;
-
- if (!is_kernel_text((long)ip) &&
- !is_bpf_text_address((long)ip))
- /* BPF poking in modules is not supported */
- return -EINVAL;
-
- switch (t) {
- case BPF_MOD_NOP_TO_CALL ... BPF_MOD_CALL_TO_NOP:
- emit_patch_fn = emit_call;
- break;
- case BPF_MOD_NOP_TO_JUMP ... BPF_MOD_JUMP_TO_NOP:
- emit_patch_fn = emit_jump;
- break;
- default:
- return -ENOTSUPP;
- }
-
- if (old_addr) {
- prog = old_insn;
- ret = emit_patch_fn(&prog, old_addr, (void *)ip);
- if (ret)
- return ret;
- }
- if (new_addr) {
- prog = new_insn;
- ret = emit_patch_fn(&prog, new_addr, (void *)ip);
- if (ret)
- return ret;
- }
-
- ret = -EBUSY;
- mutex_lock(&text_mutex);
- switch (t) {
- case BPF_MOD_NOP_TO_CALL:
- case BPF_MOD_NOP_TO_JUMP:
- if (memcmp(ip, ideal_nops[NOP_ATOMIC5], X86_PATCH_SIZE))
- goto out;
- text_poke_bp(ip, new_insn, X86_PATCH_SIZE, NULL);
- break;
- case BPF_MOD_CALL_TO_CALL:
- case BPF_MOD_JUMP_TO_JUMP:
- if (memcmp(ip, old_insn, X86_PATCH_SIZE))
- goto out;
- text_poke_bp(ip, new_insn, X86_PATCH_SIZE, NULL);
- break;
- case BPF_MOD_CALL_TO_NOP:
- case BPF_MOD_JUMP_TO_NOP:
- if (memcmp(ip, old_insn, X86_PATCH_SIZE))
- goto out;
- text_poke_bp(ip, ideal_nops[NOP_ATOMIC5], X86_PATCH_SIZE,
- NULL);
- break;
- }
- ret = 0;
-out:
- mutex_unlock(&text_mutex);
- return ret;
-}
-
static bool ex_handler_bpf(const struct exception_table_entry *x,
struct pt_regs *regs, int trapnr,
unsigned long error_code, unsigned long fault_addr)
@@ -1041,7 +1128,11 @@ xadd: if (is_imm8(insn->off))
break;
case BPF_JMP | BPF_TAIL_CALL:
- emit_bpf_tail_call(&prog);
+ if (imm32)
+ emit_bpf_tail_call_direct(&bpf_prog->aux->poke_tab[imm32 - 1],
+ &prog, addrs[i], image);
+ else
+ emit_bpf_tail_call_indirect(&prog);
break;
/* cond jump */
@@ -1599,6 +1690,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
if (image) {
if (!prog->is_func || extra_pass) {
+ bpf_tail_call_direct_fixup(prog);
bpf_jit_binary_lock_ro(header);
} else {
jit_data->addrs = addrs;
--
2.21.0
Powered by blists - more mailing lists