netdev - [PATCH net-next 3/3] net: dsa: vsc73xx: Make the MTU configurable

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Sat, 23 Nov 2019 21:48:44 +0200
From:   Vladimir Oltean <olteanv@...il.com>
To:     andrew@...n.ch, f.fainelli@...il.com, vivien.didelot@...il.com,
        davem@...emloft.net, jakub.kicinski@...ronome.com
Cc:     netdev@...r.kernel.org, Vladimir Oltean <olteanv@...il.com>
Subject: [PATCH net-next 3/3] net: dsa: vsc73xx: Make the MTU configurable

Instead of hardcoding the MTU to the maximum value allowed by the
hardware, obey the value known by the operating system.

Signed-off-by: Vladimir Oltean <olteanv@...il.com>
---
 drivers/net/dsa/vitesse-vsc73xx-core.c | 30 +++++++++++++++++---------
 1 file changed, 20 insertions(+), 10 deletions(-)

diff --git a/drivers/net/dsa/vitesse-vsc73xx-core.c b/drivers/net/dsa/vitesse-vsc73xx-core.c
index 42c1574d45f2..eed98566e2bf 100644
--- a/drivers/net/dsa/vitesse-vsc73xx-core.c
+++ b/drivers/net/dsa/vitesse-vsc73xx-core.c
@@ -663,16 +663,6 @@ static void vsc73xx_init_port(struct vsc73xx *vsc, int port)
 		      VSC73XX_MAC_CFG_TX_EN |
 		      VSC73XX_MAC_CFG_RX_EN);
 
-	/* Max length, we can do up to 9.6 KiB, so allow that.
-	 * According to application not "VSC7398 Jumbo Frames" setting
-	 * up the MTU to 9.6 KB does not affect the performance on standard
-	 * frames, so just enable it. It is clear from the application note
-	 * that "9.6 kilobytes" == 9600 bytes.
-	 */
-	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
-		      port,
-		      VSC73XX_MAXLEN, 9600);
-
 	/* Flow control for the CPU port:
 	 * Use a zero delay pause frame when pause condition is left
 	 * Obey pause control frames
@@ -1029,6 +1019,24 @@ static void vsc73xx_get_ethtool_stats(struct dsa_switch *ds, int port,
 	}
 }
 
+static int vsc73xx_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
+{
+	struct vsc73xx *vsc = ds->priv;
+
+	return vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port,
+			     VSC73XX_MAXLEN, new_mtu);
+}
+
+/* According to application not "VSC7398 Jumbo Frames" setting
+ * up the MTU to 9.6 KB does not affect the performance on standard
+ * frames. It is clear from the application note that
+ * "9.6 kilobytes" == 9600 bytes.
+ */
+static int vsc73xx_get_max_mtu(struct dsa_switch *ds, int port)
+{
+	return 9600;
+}
+
 static const struct dsa_switch_ops vsc73xx_ds_ops = {
 	.get_tag_protocol = vsc73xx_get_tag_protocol,
 	.setup = vsc73xx_setup,
@@ -1040,6 +1048,8 @@ static const struct dsa_switch_ops vsc73xx_ds_ops = {
 	.get_sset_count = vsc73xx_get_sset_count,
 	.port_enable = vsc73xx_port_enable,
 	.port_disable = vsc73xx_port_disable,
+	.change_mtu = vsc73xx_change_mtu,
+	.get_max_mtu = vsc73xx_get_max_mtu,
 };
 
 static int vsc73xx_gpio_get(struct gpio_chip *chip, unsigned int offset)
-- 
2.17.1