netdev - Re: [net-next] enetc: add support Credit Based Shaper(CBS) for hardware offload

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Sun, 24 Nov 2019 15:34:58 -0800
From:   Jakub Kicinski <jakub.kicinski@...ronome.com>
To:     Po Liu <po.liu@....com>
Cc:     "davem@...emloft.net" <davem@...emloft.net>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
        "vinicius.gomes@...el.com" <vinicius.gomes@...el.com>,
        Claudiu Manoil <claudiu.manoil@....com>,
        Vladimir Oltean <vladimir.oltean@....com>,
        Alexandru Marginean <alexandru.marginean@....com>,
        Xiaoliang Yang <xiaoliang.yang_1@....com>,
        Roy Zang <roy.zang@....com>, Mingkai Hu <mingkai.hu@....com>,
        Jerry Huang <jerry.huang@....com>, Leo Li <leoyang.li@....com>
Subject: Re: [net-next] enetc: add support Credit Based Shaper(CBS) for
 hardware offload

On Sat, 23 Nov 2019 19:02:09 -0800, Jakub Kicinski wrote:
> On Fri, 22 Nov 2019 07:17:18 +0000, Po Liu wrote:
> > +	if (tc == prio_top) {
> > +		max_interference_size = port_frame_max_size * 8;
> > +	} else {
> > +		u32 m0, ma, r0, ra;
> > +
> > +		m0 = port_frame_max_size * 8;
> > +		ma = enetc_port_rd(&si->hw, ENETC_PTCMSDUR(prio_top)) * 8;
> > +		ra = enetc_get_cbs_bw(&si->hw, prio_top) *
> > +			port_transmit_rate * 10000ULL;
> > +		r0 = port_transmit_rate * 1000000ULL;
> > +		max_interference_size = m0 + ma + (u64)ra * m0 / (r0 - ra);
> > +	}
> > +
> > +	/* hiCredit bits calculate by:
> > +	 *
> > +	 * maxSizedFrame * (idleSlope/portTxRate)
> > +	 */
> > +	hi_credit_bit = max_interference_size * bw / 100;
> > +
> > +	/* hiCredit bits to hiCredit register need to calculated as:
> > +	 *
> > +	 * (enetClockFrequency / portTransmitRate) * 100
> > +	 */
> > +	hi_credit_reg = (ENETC_CLK * 100ULL) * hi_credit_bit
> > +			/ (port_transmit_rate * 1000000ULL);  
> 
> Hi! The patch looks good to me, but I'm concerned about those 64bit
> divisions here. Don't these need to be div_u64() & co.? Otherwise
> we may see one of the:
> 
> ERROR: "__udivdi3" [drivers/net/ethernet/freescale/enetc/fsl-enetc.ko] undefined!
> 
> messages from the build bot..
> 
> I could be wrong, I haven't actually tested..

Yup:

drivers/net/ethernet/freescale/enetc/enetc_qos.o: In function `enetc_setup_tc_cbs':
enetc_qos.c:(.text+0x5b4): undefined reference to `__udivdi3'
enetc_qos.c:(.text+0x608): undefined reference to `__udivdi3'
/home/jkicinski/devel/linux/Makefile:1077: recipe for target 'vmlinux' failed
make[1]: *** [vmlinux] Error 1
make[1]: Leaving directory '/home/jkicinski/devel/linux/build_tmp2'
Makefile:179: recipe for target 'sub-make' failed
make: *** [sub-make] Error 2

Please fix and repost.