netdev - [PATCH 1/2] DTS: bindings: wl1251: mark ti,power-gpio as optional

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <c95e814deed075352a05c392147e9458b0d1a447.1574591746.git.hns@goldelico.com>
Date:   Sun, 24 Nov 2019 11:35:45 +0100
From:   "H. Nikolaus Schaller" <hns@...delico.com>
To:     Ulf Hansson <ulf.hansson@...aro.org>,
        Kalle Valo <kvalo@...eaurora.org>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        "H. Nikolaus Schaller" <hns@...delico.com>,
        Thomas Gleixner <tglx@...utronix.de>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Alexios Zavras <alexios.zavras@...el.com>
Cc:     linux-wireless@...r.kernel.org, netdev@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        letux-kernel@...nphoenux.org, kernel@...a-handheld.com
Subject: [PATCH 1/2] DTS: bindings: wl1251: mark ti,power-gpio as optional

It is now only useful for SPI interface.
Power control of SDIO mode is done through mmc core.

Suggested by: Ulf Hansson <ulf.hansson@...aro.org>
Signed-off-by: H. Nikolaus Schaller <hns@...delico.com>
---
 Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
index f38950560982..88fd28d15eac 100644
--- a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
+++ b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
@@ -9,11 +9,12 @@ Required properties:
 - spi-max-frequency : Maximum SPI clocking speed of device in Hz
 - interrupts :        Should contain interrupt line
 - vio-supply :        phandle to regulator providing VIO
-- ti,power-gpio :     GPIO connected to chip's PMEN pin
 
 Optional properties:
 - ti,wl1251-has-eeprom : boolean, the wl1251 has an eeprom connected, which
                          provides configuration data (calibration, MAC, ...)
+- ti,power-gpio :	 GPIO connected to chip's PMEN pin if operated in
+			 SPI mode
 - Please consult Documentation/devicetree/bindings/spi/spi-bus.txt
   for optional SPI connection related properties,
 
-- 
2.23.0