[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20191126091946.7970-1-nsaenzjulienne@suse.de>
Date: Tue, 26 Nov 2019 10:19:38 +0100
From: Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
To: andrew.murray@....com, maz@...nel.org, linux-kernel@...r.kernel.org
Cc: james.quinlan@...adcom.com, mbrugger@...e.com,
f.fainelli@...il.com, phil@...pberrypi.org, wahrenst@....net,
jeremy.linton@....com, linux-pci@...r.kernel.org,
linux-rpi-kernel@...ts.infradead.org,
Nicolas Saenz Julienne <nsaenzjulienne@...e.de>,
Robin Murphy <robin.murphy@....com>,
linux-arm-kernel@...ts.infradead.org,
bcm-kernel-feedback-list@...adcom.com, devicetree@...r.kernel.org,
linux-acpi@...r.kernel.org, netdev@...r.kernel.org,
linux-rdma@...r.kernel.org, linux-rockchip@...ts.infradead.org,
iommu@...ts.linux-foundation.org
Subject: [PATCH v3 0/7] Raspberry Pi 4 PCIe support
This series aims at providing support for Raspberry Pi 4's PCIe
controller, which is also shared with the Broadcom STB family of
devices.
There was a previous attempt to upstream this some years ago[1] but was
blocked as most STB PCIe integrations have a sparse DMA mapping[2] which
is something currently not supported by the kernel. Luckily this is not
the case for the Raspberry Pi 4.
Note that the driver code is to be based on top of Rob Herring's series
simplifying inbound and outbound range parsing.
[1] https://patchwork.kernel.org/cover/10605933/
[2] https://patchwork.kernel.org/patch/10605957/
---
Changes since v2:
- Redo register access in driver avoiding indirection while keeping
the naming intact
- Add patch editing ARM64's config
- Last MSI cleanups, notably removing MSIX flag
- Got rid of all _RB writes
- Got rid of all of_data
- Overall churn removal
- Address the rest of Andrew's comments
Changes since v1:
- add generic rounddown/roundup_pow_two64() patch
- Add MAINTAINERS patch
- Fix Kconfig
- Cleanup probe, use up to date APIs, exit on MSI failure
- Get rid of linux,pci-domain and other unused constructs
- Use edge triggered setup for MSI
- Cleanup MSI implementation
- Fix multiple cosmetic issues
- Remove supend/resume code
Jim Quinlan (3):
dt-bindings: PCI: Add bindings for brcmstb's PCIe device
PCI: brcmstb: add Broadcom STB PCIe host controller driver
PCI: brcmstb: add MSI capability
Nicolas Saenz Julienne (4):
linux/log2.h: Add roundup/rounddown_pow_two64() family of functions
ARM: dts: bcm2711: Enable PCIe controller
MAINTAINERS: Add brcmstb PCIe controller
arm64: defconfig: Enable Broadcom's STB PCIe controller
.../bindings/pci/brcm,stb-pcie.yaml | 97 ++
MAINTAINERS | 4 +
arch/arm/boot/dts/bcm2711.dtsi | 41 +
arch/arm64/configs/defconfig | 1 +
drivers/acpi/arm64/iort.c | 2 +-
drivers/net/ethernet/mellanox/mlx4/en_clock.c | 3 +-
drivers/of/device.c | 2 +-
drivers/pci/controller/Kconfig | 9 +
drivers/pci/controller/Makefile | 1 +
.../pci/controller/cadence/pcie-cadence-ep.c | 7 +-
drivers/pci/controller/cadence/pcie-cadence.c | 7 +-
drivers/pci/controller/pcie-brcmstb.c | 1012 +++++++++++++++++
drivers/pci/controller/pcie-rockchip-ep.c | 9 +-
include/linux/log2.h | 52 +
kernel/dma/direct.c | 3 +-
15 files changed, 1230 insertions(+), 20 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
create mode 100644 drivers/pci/controller/pcie-brcmstb.c
--
2.24.0
Powered by blists - more mailing lists