[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20191128172204.26600-6-johan@kernel.org>
Date: Thu, 28 Nov 2019 18:22:04 +0100
From: Johan Hovold <johan@...nel.org>
To: Amitkumar Karwar <amitkarwar@...il.com>,
Siva Rebbagondla <siva8118@...il.com>,
Kalle Valo <kvalo@...eaurora.org>
Cc: linux-wireless@...r.kernel.org, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-usb@...r.kernel.org,
Johan Hovold <johan@...nel.org>
Subject: [PATCH 5/5] rsi: add missing endpoint sanity checks
The driver expects at least one bulk-in endpoint when in "wifi-alone"
operating mode and two bulk-in endpoints otherwise, and would otherwise
fail to to submit the corresponding bulk URB to the default pipe during
probe with a somewhat cryptic message:
rsi_91x: rsi_rx_urb_submit: Failed in urb submission
rsi_91x: rsi_probe: Failed in probe...Exiting
RSI-USB WLAN: probe of 2-2.4:1.0 failed with error -8
The current endpoint sanity check looks broken and would only bail out
early if there was no bulk-in endpoint but at least one bulk-out
endpoint.
Tighten this check to always require at least one bulk-in and one
bulk-out endpoint, and add the missing sanity check for a Bluetooth
bulk-in endpoint when in a BT operating mode. Also make sure to log an
informative error message when the expected endpoints are missing.
Signed-off-by: Johan Hovold <johan@...nel.org>
---
drivers/net/wireless/rsi/rsi_91x_usb.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/rsi/rsi_91x_usb.c b/drivers/net/wireless/rsi/rsi_91x_usb.c
index ead75574e10a..396b9b81c1cd 100644
--- a/drivers/net/wireless/rsi/rsi_91x_usb.c
+++ b/drivers/net/wireless/rsi/rsi_91x_usb.c
@@ -149,9 +149,17 @@ static int rsi_find_bulk_in_and_out_endpoints(struct usb_interface *interface,
break;
}
- if (!(dev->bulkin_endpoint_addr[0]) &&
- dev->bulkout_endpoint_addr[0])
+ if (!(dev->bulkin_endpoint_addr[0] && dev->bulkout_endpoint_addr[0])) {
+ dev_err(&interface->dev, "missing wlan bulk endpoints\n");
return -EINVAL;
+ }
+
+ if (adapter->priv->coex_mode > 1) {
+ if (!dev->bulkin_endpoint_addr[1]) {
+ dev_err(&interface->dev, "missing bt bulk-in endpoint\n");
+ return -EINVAL;
+ }
+ }
return 0;
}
--
2.24.0
Powered by blists - more mailing lists