netdev - [PATCH net-next 12/14] net: phylink: make Broadcom BCM84881 based SFPs work

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <E1ieJhP-0004Pc-8e@rmk-PC.armlinux.org.uk>
Date:   Mon, 09 Dec 2019 14:07:43 +0000
From:   Russell King <rmk+kernel@...linux.org.uk>
To:     Andrew Lunn <andrew@...n.ch>,
        Florian Fainelli <f.fainelli@...il.com>,
        Heiner Kallweit <hkallweit1@...il.com>
Cc:     "David S. Miller" <davem@...emloft.net>, netdev@...r.kernel.org
Subject: [PATCH net-next 12/14] net: phylink: make Broadcom BCM84881 based
 SFPs work

The Broadcom BCM84881 does not appear to send the SGMII control word
when operating in SGMII mode, which causes network adapters to fail
to link with the PHY, or decide to operate at fixed 1G speed, even if
the PHY negotiated 100M.

Work around this by detecting the Broadcom BCM84881 and switch to phy
mode rather than inband mode.

Signed-off-by: Russell King <rmk+kernel@...linux.org.uk>
---
 drivers/net/phy/phylink.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index c3eda3800357..66b4357ccbda 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -1842,10 +1842,20 @@ static void phylink_sfp_link_up(void *upstream)
 	phylink_run_resolve(pl);
 }
 
+/* The Broadcom BCM84881 in the Methode DM7052 is unable to provide a SGMII
+ * or 802.3z control word, so inband will not work.
+ */
+static bool phylink_phy_no_inband(struct phy_device *phy)
+{
+	return phy->is_c45 &&
+		(phy->c45_ids.device_ids[1] & 0xfffffff0) == 0xae025150;
+}
+
 static int phylink_sfp_connect_phy(void *upstream, struct phy_device *phy)
 {
 	struct phylink *pl = upstream;
 	phy_interface_t interface;
+	u8 mode;
 	int ret;
 
 	/*
@@ -1857,9 +1867,13 @@ static int phylink_sfp_connect_phy(void *upstream, struct phy_device *phy)
 	 */
 	phy_support_asym_pause(phy);
 
+	if (phylink_phy_no_inband(phy))
+		mode = MLO_AN_PHY;
+	else
+		mode = MLO_AN_INBAND;
+
 	/* Do the initial configuration */
-	ret = phylink_sfp_config(pl, ML_AN_INBAND, phy->supported,
-				 phy->advertising);
+	ret = phylink_sfp_config(pl, mode, phy->supported, phy->advertising);
 	if (ret < 0)
 		return ret;
 
-- 
2.20.1