[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20191209.143525.2056433568231018957.davem@davemloft.net>
Date: Mon, 09 Dec 2019 14:35:25 -0800 (PST)
From: David Miller <davem@...emloft.net>
To: linux@...linux.org.uk
Cc: andrew@...n.ch, f.fainelli@...il.com, hkallweit1@...il.com,
netdev@...r.kernel.org
Subject: Re: [PATCH net-next 0/4] Add support for slow-to-probe-PHY copper
SFP modules
From: David Miller <davem@...emloft.net>
Date: Mon, 09 Dec 2019 14:34:49 -0800 (PST)
> From: Russell King - ARM Linux admin <linux@...linux.org.uk>
> Date: Mon, 9 Dec 2019 14:15:25 +0000
>
>> This series, following on from the previous adding SFP+ copper support,
>> adds support for a range of Copper SFP modules, made by a variety of
>> companies, all of which have a Marvell 88E1111 PHY on them, but take
>> far longer than the Marvell spec'd 15ms to start communicating on the
>> I2C bus.
>>
>> Researching the Champion One 1000SFPT module reveals that TX_DISABLE is
>> routed through a MAX1971 switching regulator and reset IC which adds a
>> 175ms delay to releasing the 88E1111 reset.
>>
>> It is not known whether other modules use a similar setup, but there
>> are a range of modules that are slow for the Marvell PHY to appear.
>>
>> This patch series adds support for these modules by repeatedly trying
>> to probe the PHY for up to 600ms.
>
> Patch #3 gets full rejects when I try to apply this series.
>
> Please respin, adding Andrew's ACKs.
Oh nevermind, I see this depends upon a series that's now in v2 and
thus appears later int he queue.
Powered by blists - more mailing lists