lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Wed, 11 Dec 2019 10:55:54 +0000
From:   Russell King <rmk+kernel@...linux.org.uk>
To:     Andrew Lunn <andrew@...n.ch>,
        Florian Fainelli <f.fainelli@...il.com>,
        Heiner Kallweit <hkallweit1@...il.com>
Cc:     "David S. Miller" <davem@...emloft.net>, netdev@...r.kernel.org
Subject: [PATCH net-next v3 01/14] net: sfp: remove incomplete 100BASE-FX and
 100BASE-LX support

The 100BASE-FX and 100BASE-LX support assumes a PHY is present; this
is probably an incorrect assumption. In any case, sfp_parse_support()
will fail such a module. Let's stop pretending we support these
modules.

Reviewed-by: Andrew Lunn <andrew@...n.ch>
Signed-off-by: Russell King <rmk+kernel@...linux.org.uk>
---
 drivers/net/phy/sfp-bus.c |  4 +---
 drivers/net/phy/sfp.c     | 13 +------------
 2 files changed, 2 insertions(+), 15 deletions(-)

diff --git a/drivers/net/phy/sfp-bus.c b/drivers/net/phy/sfp-bus.c
index 5a72093ab6e7..02ab07624c89 100644
--- a/drivers/net/phy/sfp-bus.c
+++ b/drivers/net/phy/sfp-bus.c
@@ -342,9 +342,7 @@ phy_interface_t sfp_select_interface(struct sfp_bus *bus,
 	if (phylink_test(link_modes, 2500baseX_Full))
 		return PHY_INTERFACE_MODE_2500BASEX;
 
-	if (id->base.e1000_base_t ||
-	    id->base.e100_base_lx ||
-	    id->base.e100_base_fx)
+	if (id->base.e1000_base_t)
 		return PHY_INTERFACE_MODE_SGMII;
 
 	if (phylink_test(link_modes, 1000baseX_Full))
diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index 27360d1840b2..ae6a52a19458 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -1489,18 +1489,7 @@ static void sfp_sm_fault(struct sfp *sfp, unsigned int next_state, bool warn)
 
 static void sfp_sm_probe_for_phy(struct sfp *sfp)
 {
-	/* Setting the serdes link mode is guesswork: there's no
-	 * field in the EEPROM which indicates what mode should
-	 * be used.
-	 *
-	 * If it's a gigabit-only fiber module, it probably does
-	 * not have a PHY, so switch to 802.3z negotiation mode.
-	 * Otherwise, switch to SGMII mode (which is required to
-	 * support non-gigabit speeds) and probe for a PHY.
-	 */
-	if (sfp->id.base.e1000_base_t ||
-	    sfp->id.base.e100_base_lx ||
-	    sfp->id.base.e100_base_fx)
+	if (sfp->id.base.e1000_base_t)
 		sfp_sm_probe_phy(sfp);
 }
 
-- 
2.20.1

Powered by blists - more mailing lists