[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1576086486.23763.61.camel@mtksdccf07>
Date: Thu, 12 Dec 2019 01:48:06 +0800
From: Landen Chao <landen.chao@...iatek.com>
To: Andrew Lunn <andrew@...n.ch>
CC: "f.fainelli@...il.com" <f.fainelli@...il.com>,
"vivien.didelot@...oirfairelinux.com"
<vivien.didelot@...oirfairelinux.com>,
"matthias.bgg@...il.com" <matthias.bgg@...il.com>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"mark.rutland@....com" <mark.rutland@....com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-mediatek@...ts.infradead.org"
<linux-mediatek@...ts.infradead.org>,
"davem@...emloft.net" <davem@...emloft.net>,
Sean Wang <Sean.Wang@...iatek.com>,
"opensource@...rst.com" <opensource@...rst.com>,
"frank-w@...lic-files.de" <frank-w@...lic-files.de>
Subject: Re: [PATCH net-next 4/6] net: dsa: mt7530: Add the support of
MT7531 switch
On Wed, 2019-12-11 at 00:48 +0800, Andrew Lunn wrote:
> > +static int mt7531_setup(struct dsa_switch *ds)
> > +{
> > + /* Enable PHY power, since phy_device has not yet been created
> > + * provided for phy_[read,write]_mmd_indirect is called, we provide
> > + * our own mt7531_ind_mmd_phy_[read,write] to complete this
> > + * function.
> > + */
> > + val = mt7531_ind_mmd_phy_read(priv, 0, PHY_DEV1F,
> > + MT7531_PHY_DEV1F_REG_403);
> > + val |= MT7531_PHY_EN_BYPASS_MODE;
> > + val &= ~MT7531_PHY_POWER_OFF;
> > + mt7531_ind_mmd_phy_write(priv, 0, PHY_DEV1F,
> > + MT7531_PHY_DEV1F_REG_403, val);
> > +
>
> Is this power to all the PHYs? Or just one?
This is an internal circuit that controls the power to all PHYs before
Generic MII registers are available.
Landen
>
> Andrew
Powered by blists - more mailing lists