[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20191217221831.10923-7-olteanv@gmail.com>
Date: Wed, 18 Dec 2019 00:18:29 +0200
From: Vladimir Oltean <olteanv@...il.com>
To: davem@...emloft.net, jakub.kicinski@...ronome.com,
linux@...linux.org.uk, andrew@...n.ch, f.fainelli@...il.com,
vivien.didelot@...il.com
Cc: alexandru.marginean@....com, claudiu.manoil@....com,
xiaoliang.yang_1@....com, yangbo.lu@....com,
netdev@...r.kernel.org, alexandre.belloni@...tlin.com,
horatiu.vultur@...rochip.com,
Vladimir Oltean <vladimir.oltean@....com>
Subject: [RFC PATCH v2 6/8] net: mscc: ocelot: make phy_mode a member of the common struct ocelot_port
From: Vladimir Oltean <vladimir.oltean@....com>
The Ocelot switchdev driver and the Felix DSA one need it for different
reasons. Felix (or at least the VSC9959 instantiation in NXP LS1028A) is
integrated with the traditional NXP Layerscape PCS design which does not
support runtime configuration of SerDes protocol. So it needs to
pre-validate the phy-mode from the device tree and prevent PHYLINK from
attempting to change it. For this, it needs to cache it in a private
variable.
Signed-off-by: Vladimir Oltean <vladimir.oltean@....com>
---
drivers/net/ethernet/mscc/ocelot.c | 7 ++++---
drivers/net/ethernet/mscc/ocelot.h | 1 -
drivers/net/ethernet/mscc/ocelot_board.c | 4 ++--
include/soc/mscc/ocelot.h | 2 ++
4 files changed, 8 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
index 985b46d7e3d1..86d543ab1ab9 100644
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -500,13 +500,14 @@ EXPORT_SYMBOL(ocelot_port_enable);
static int ocelot_port_open(struct net_device *dev)
{
struct ocelot_port_private *priv = netdev_priv(dev);
- struct ocelot *ocelot = priv->port.ocelot;
+ struct ocelot_port *ocelot_port = &priv->port;
+ struct ocelot *ocelot = ocelot_port->ocelot;
int port = priv->chip_port;
int err;
if (priv->serdes) {
err = phy_set_mode_ext(priv->serdes, PHY_MODE_ETHERNET,
- priv->phy_mode);
+ ocelot_port->phy_mode);
if (err) {
netdev_err(dev, "Could not set mode of SerDes\n");
return err;
@@ -514,7 +515,7 @@ static int ocelot_port_open(struct net_device *dev)
}
err = phy_connect_direct(dev, priv->phy, &ocelot_port_adjust_link,
- priv->phy_mode);
+ ocelot_port->phy_mode);
if (err) {
netdev_err(dev, "Could not attach to PHY\n");
return err;
diff --git a/drivers/net/ethernet/mscc/ocelot.h b/drivers/net/ethernet/mscc/ocelot.h
index c259114c48fd..7b77d44ed7cf 100644
--- a/drivers/net/ethernet/mscc/ocelot.h
+++ b/drivers/net/ethernet/mscc/ocelot.h
@@ -68,7 +68,6 @@ struct ocelot_port_private {
u8 vlan_aware;
- phy_interface_t phy_mode;
struct phy *serdes;
struct ocelot_port_tc tc;
diff --git a/drivers/net/ethernet/mscc/ocelot_board.c b/drivers/net/ethernet/mscc/ocelot_board.c
index 2da8eee27e98..b38820849faa 100644
--- a/drivers/net/ethernet/mscc/ocelot_board.c
+++ b/drivers/net/ethernet/mscc/ocelot_board.c
@@ -402,9 +402,9 @@ static int mscc_ocelot_probe(struct platform_device *pdev)
of_get_phy_mode(portnp, &phy_mode);
- priv->phy_mode = phy_mode;
+ ocelot_port->phy_mode = phy_mode;
- switch (priv->phy_mode) {
+ switch (ocelot_port->phy_mode) {
case PHY_INTERFACE_MODE_NA:
continue;
case PHY_INTERFACE_MODE_SGMII:
diff --git a/include/soc/mscc/ocelot.h b/include/soc/mscc/ocelot.h
index 64cbbbe74a36..068f96b1a83e 100644
--- a/include/soc/mscc/ocelot.h
+++ b/include/soc/mscc/ocelot.h
@@ -420,6 +420,8 @@ struct ocelot_port {
u8 ptp_cmd;
struct sk_buff_head tx_skbs;
u8 ts_id;
+
+ phy_interface_t phy_mode;
};
struct ocelot {
--
2.7.4
Powered by blists - more mailing lists