netdev - [PATCH net-next 0/4] Support fraglist GRO/GSO

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20191218133458.14533-1-steffen.klassert@secunet.com>
Date:   Wed, 18 Dec 2019 14:34:54 +0100
From:   Steffen Klassert <steffen.klassert@...unet.com>
To:     David Miller <davem@...emloft.net>
CC:     Steffen Klassert <steffen.klassert@...unet.com>,
        Willem de Bruijn <willemb@...gle.com>,
        Paolo Abeni <pabeni@...hat.com>,
        Subash Abhinov Kasiviswanathan <subashab@...eaurora.org>,
        Marcelo Ricardo Leitner <marcelo.leitner@...il.com>,
        <netdev@...r.kernel.org>
Subject: [PATCH net-next 0/4] Support fraglist GRO/GSO

This patchset adds support to do GRO/GSO by chaining packets
of the same flow at the SKB frag_list pointer. This avoids
the overhead to merge payloads into one big packet, and
on the other end, if GSO is needed it avoids the overhead
of splitting the big packet back to the native form.

Patch 1 adds netdev feature flags to enable listifyed GRO,
this implements one of the configuration options discussed
at netconf 2019.

Patch 2 adds a netdev software feature set that defaults to off
and assigns the new listifyed GRO feature flag to it.

Patch 3 adds the core infrastructure to do fraglist GRO/GSO.

Patch 4 enables UDP to use fraglist GRO/GSO if configured.

I have only meaningful forwarding performance measurements.
I did some tests for the local receive path with netperf and iperf,
but in this case the sender that generates the packets is the
bottleneck. So the benchmarks are not that meaningful for the
receive path.

Paolo Abeni did some benchmarks of the local receive path for the v2
version of this pachset, results can be found here:

https://www.spinics.net/lists/netdev/msg551158.html

I used my IPsec forwarding test setup for the performance measurements:

           ------------         ------------
        -->| router 1 |-------->| router 2 |--
        |  ------------         ------------  |
        |                                     |
        |       --------------------          |
        --------|Spirent Testcenter|<----------
                --------------------

net-next (September 7th):

Single stream UDP frame size 1460 Bytes: 1.161.000 fps (13.5 Gbps).

----------------------------------------------------------------------

net-next (September 7th) + standard UDP GRO/GSO (not implemented
in this patchset):

Single stream UDP frame size 1460 Bytes: 1.801.000 fps (21 Gbps).

----------------------------------------------------------------------
net-next (September 7th) + fraglist UDP GRO/GSO:

Single stream UDP frame size 1460 Bytes: 2.860.000 fps (33.4 Gbps).

-----------------------------------------------------------------------

Changes from RFC v1:

- Add IPv6 support.
- Split patchset to enable UDP GRO by default before adding
  fraglist GRO support.
- Mark fraglist GRO packets as CHECKSUM_NONE.
- Take a refcount on the first segment skb when doing fraglist
  segmentation. With this we can use the same error handling
  path as with standard segmentation.

Changes from RFC v2:

- Add a netdev feature flag to configure listifyed GRO.
- Fix UDP GRO enabling for IPv6.
- Fix a rcu_read_lock() imbalance.
- Fix error path in skb_segment_list().

Changes from RFC v3:

- Rename NETIF_F_GRO_LIST to NETIF_F_GRO_FRAGLIST and add
  NETIF_F_GSO_FRAGLIST.
- Move introduction of SKB_GSO_FRAGLIST to patch 2.
- Use udpv6_encap_needed_key instead of udp_encap_needed_key in IPv6.
- Move some missplaced code from patch 5 to patch 1 where it belongs to.

Changes from RFC v4:

- Drop the 'UDP: enable GRO by default' patch for now. Standard UDP GRO
  is not changed with this patchset.
- Rebase to net-next current.