netdev - [PATCH net-next v2 0/7] Add PHY connection types for XFI and SFI

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1577096053-20507-1-git-send-email-madalin.bucur@oss.nxp.com>
Date:   Mon, 23 Dec 2019 12:14:06 +0200
From:   Madalin Bucur <madalin.bucur@....nxp.com>
To:     davem@...emloft.net, netdev@...r.kernel.org, linux@...linux.org.uk,
        andrew@...n.ch
Cc:     f.fainelli@...il.com, hkallweit1@...il.com, shawnguo@...nel.org,
        leoyang.li@....com, devicetree@...r.kernel.org, robh+dt@...nel.org,
        mark.rutland@....com, Madalin Bucur <madalin.bucur@....nxp.com>
Subject: [PATCH net-next v2 0/7] Add PHY connection types for XFI and SFI

For a long time the only 10G interface mode registered in the code was
XGMII and some PHYs and MACs that actually supported other modes just
used that to denote 10G. Recently more modes were added (USXGMII,
10GKR) to better match the actual HW support. In this respect, the use
of 10GBase-KR to denote not only backplane but also XFI and SFI can be
improved upon. This patch series introduces XFI and SFI PHY connection
types and initial users for them.


Changes from v1:
  Reorder patches to avoid issues with git bisect
  Add devicetree bindings entry for XFI, SFI

Madalin Bucur (7):
  net: phy: add interface modes for XFI, SFI
  net: fsl/fman: rename IF_MODE_XGMII to IF_MODE_10G
  net: fsl/fman: add support for PHY_INTERFACE_MODE_XFI
  net: fsl/fman: add support for PHY_INTERFACE_MODE_SFI
  net: phy: aquantia: add support for PHY_INTERFACE_MODE_XFI
  dt-bindings: net: add xfi, sfi to phy-connection-type
  arm64: dts: ls104xardb: set correct PHY interface mode

 Documentation/devicetree/bindings/net/ethernet-controller.yaml |  2 ++
 arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts              |  2 +-
 arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts              |  4 ++--
 drivers/net/ethernet/freescale/fman/fman_memac.c               | 10 +++++++---
 drivers/net/ethernet/freescale/fman/mac.c                      | 10 +++++++---
 drivers/net/phy/aquantia_main.c                                |  5 ++++-
 include/linux/phy.h                                            |  7 ++++++-
 7 files changed, 29 insertions(+), 11 deletions(-)

-- 
2.1.0