netdev - [PATCH net-next v2 4/7] net: fsl/fman: add support for PHY_INTERFACE_MODE

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1577096053-20507-5-git-send-email-madalin.bucur@oss.nxp.com>
Date:   Mon, 23 Dec 2019 12:14:10 +0200
From:   Madalin Bucur <madalin.bucur@....nxp.com>
To:     davem@...emloft.net, netdev@...r.kernel.org, linux@...linux.org.uk,
        andrew@...n.ch
Cc:     f.fainelli@...il.com, hkallweit1@...il.com, shawnguo@...nel.org,
        leoyang.li@....com, devicetree@...r.kernel.org, robh+dt@...nel.org,
        mark.rutland@....com, Madalin Bucur <madalin.bucur@....nxp.com>
Subject: [PATCH net-next v2 4/7] net: fsl/fman: add support for PHY_INTERFACE_MODE_SFI

Add support for the SFI PHY interface mode.

Signed-off-by: Madalin Bucur <madalin.bucur@....nxp.com>
---
 drivers/net/ethernet/freescale/fman/fman_memac.c | 2 ++
 drivers/net/ethernet/freescale/fman/mac.c        | 2 ++
 2 files changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/freescale/fman/fman_memac.c b/drivers/net/ethernet/freescale/fman/fman_memac.c
index d0b12efadd6c..09fdec935bf2 100644
--- a/drivers/net/ethernet/freescale/fman/fman_memac.c
+++ b/drivers/net/ethernet/freescale/fman/fman_memac.c
@@ -440,6 +440,7 @@ static int init(struct memac_regs __iomem *regs, struct memac_cfg *cfg,
 	tmp = 0;
 	switch (phy_if) {
 	case PHY_INTERFACE_MODE_XFI:
+	case PHY_INTERFACE_MODE_SFI:
 	case PHY_INTERFACE_MODE_XGMII:
 		tmp |= IF_MODE_10G;
 		break;
@@ -456,6 +457,7 @@ static int init(struct memac_regs __iomem *regs, struct memac_cfg *cfg,
 	/* TX_FIFO_SECTIONS */
 	tmp = 0;
 	if (phy_if == PHY_INTERFACE_MODE_XFI ||
+	    phy_if == PHY_INTERFACE_MODE_SFI ||
 	    phy_if == PHY_INTERFACE_MODE_XGMII) {
 		if (slow_10g_if) {
 			tmp |= (TX_FIFO_SECTIONS_TX_AVAIL_SLOW_10G |
diff --git a/drivers/net/ethernet/freescale/fman/mac.c b/drivers/net/ethernet/freescale/fman/mac.c
index 2944188c19b3..5e6317742c38 100644
--- a/drivers/net/ethernet/freescale/fman/mac.c
+++ b/drivers/net/ethernet/freescale/fman/mac.c
@@ -542,6 +542,7 @@ static const u16 phy2speed[] = {
 	[PHY_INTERFACE_MODE_QSGMII]		= SPEED_1000,
 	[PHY_INTERFACE_MODE_XGMII]		= SPEED_10000,
 	[PHY_INTERFACE_MODE_XFI]		= SPEED_10000,
+	[PHY_INTERFACE_MODE_SFI]		= SPEED_10000,
 };
 
 static struct platform_device *dpaa_eth_add_device(int fman_id,
@@ -800,6 +801,7 @@ static int mac_probe(struct platform_device *_of_dev)
 
 	/* The 10G interface only supports one mode */
 	if (mac_dev->phy_if == PHY_INTERFACE_MODE_XFI ||
+	    mac_dev->phy_if == PHY_INTERFACE_MODE_SFI ||
 	    mac_dev->phy_if == PHY_INTERFACE_MODE_XGMII)
 		mac_dev->if_support = SUPPORTED_10000baseT_Full;
 
-- 
2.1.0